December 22, 2014, 11:07:48 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - T-RonX

Pages: [1] 2
1
I just came back from a holiday trip and used the Flipside 500 for the first time. Great bag, but you shouldn't put a 24-70mm II mounted on a camera with the lens hood faced forward in it. The pressure on the lens hood makes it partly snap over the mounting ring. It's hard to get it back in place without breaking anything. Happened to me twice. Works fine with lens hood reversed though.

2
Animal Kingdom / Re: Your best animal shots!
« on: September 14, 2014, 04:00:49 PM »
GaiaZoo.

Too bad you can see the fence in the bokeh. >:(

3
Black & White / Re: Black and White Landscapes!
« on: September 07, 2013, 06:26:05 PM »
6D

4
Landscape / Re: Post Your Best Landscapes
« on: April 04, 2013, 02:36:01 PM »
500D, 15-85mm @ 15mm, f/5.0, ISO 100 With CPL

Torres del Paine National Park in Chile

5
Software & Accessories / Re: Trying to draw viewfinder sizes on screen
« on: March 28, 2013, 02:06:31 PM »
I wonder if I calculate the magnification right. Now I'm taking 71% of the total sensor surface. If I try to take 71% of each side of the sensor and then calculate the surface I end up with a tad smaller rectangle.

6
Software & Accessories / Re: Trying to draw viewfinder sizes on screen
« on: March 28, 2013, 01:20:15 PM »
Ok I found a flaw. I assumed my Dell U2410 had 72 dpi, which I guess is from the old analog days, but it actually has 94 dpi. But I'm still not sure if the calculations are correct at all. Anyone?

edit:
update result pic with dpi

7
Software & Accessories / Re: Trying to draw viewfinder sizes on screen
« on: March 28, 2013, 01:02:35 PM »
There you go. If anyone can tell me these calculations are correct I could make a public tool out of this.

8
Software & Accessories / Trying to draw viewfinder sizes on screen
« on: March 28, 2013, 11:05:13 AM »
Hi,

I am trying to make a little tool for myself to compare viewfinder sizes. I do get some results but the rectangles seem to be a bit small I think. Probably interpreting some values wrong. Can someone please have a look?

The colors in red are the 6D's sensor size, magnification, viewfinder coverage and aspect ratio respectively.

magni = ((35,8 mm * 23,9 mm) = 855,62 mm2) * .71x = 607,4902 mm2
surface = (magni * 97%) = 589,265494 mm2
edge = sqrt(surface) = 24,274791327630398396804364790437 mm) * 2 = 48,549582655260796793608729580875 mm
aspec_part = edge / (3 + 2) = 9,7099165310521593587217459161749 mm
width = aspec_part * 3 = 29,129749593156478076165237748525 mm
height = aspec_part * 2 = 19,41983306210431871744349183235 mm
width_px =(width * 0,0393700787) = 1,1468405339938635232734500043636 inch * 72 dpi = 83px
height_px = (height * 0,0393700787) = 0,76456035599590901551563333624242 inch * 72 dpi = 55px

Below are the results I get.

Thanks,
Ron

9
Landscape / Re: Post Your Best Landscapes
« on: February 04, 2013, 04:52:28 PM »
Vietnam

10
Black & White / Re: Black & White
« on: January 13, 2013, 05:12:30 PM »
500D with a 50mm 1.4 @ 2.8, ISO 400, 1/500

11
EOS Bodies - For Stills / Re: 6D Experience
« on: December 14, 2012, 12:21:46 PM »
Does Auto ISO work in manual mode? My 500D is stuck on ISO400 in manual and Auto ISO.

12
EOS Bodies - For Stills / Re: 6D Experience
« on: December 11, 2012, 05:26:53 PM »
Sorry for being unclear. By "wheel" I actually meant the D pad. And currently I change AF point using the top right button and then turning the wheel behind shutter just like you said.

13
EOS Bodies - For Stills / Re: 6D Experience
« on: December 11, 2012, 04:45:45 PM »
I have some questions.

The sample images Canon released don't look exactly sharp, I don't know if it's due to the lack of sharpening or if it's just me, but can anybody comment on that or perhaps post a full-res jpg?

Any noticeable improvements in Dynamic Range?

Can you still change the AF point using the top right button like I can on my 500D, or do you have to use the wheel?

Thx

14
EOS Bodies - For Stills / Re: 6D Experience
« on: December 11, 2012, 03:50:35 PM »
Thank you very much for your initial thoughts. I was kind of waiting for this information. I am in the same boat as you were, I have a 500D and use it for travel/nature. I went to a local photo store and held one in my hands. It feels absolutely amazing and the large viewfinder is a great improvement.

Thanks for answering my questions about focus, ISO and operation! I think I'm going to buy myself a nice Christmas present this year. ;D

15
EOS Bodies / Re: EOS 6D manual is ready to download
« on: November 28, 2012, 01:02:08 PM »
If you lookup the EOS Remote app in the Play Store it says:

Quote
Compatible Cameras
- Canon EOS 6D (WG)/(W)

(W)? Wifi only version?

Pages: [1] 2