August 01, 2014, 05:22:41 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Schruminator

Pages: [1] 2 3 ... 6
Software & Accessories / Re: Neutral Density Filters
« on: July 08, 2014, 10:21:50 AM »
I have a couple of Hoya HMC 10 stop screw on filters in various sizes. They do have a slight color cast, but it's easily correctable in post processing. Personally I went towards screw on filters due to the small size and overall convenience as I generally don't have any other filters I tote along on my shoots.

Anyways, long story short, I'm happy with the Hoyas and the image quality/clarity seems to be pretty darn good (minus the color cast). They do flare pretty well if direct sunlight is hitting the filter at an odd angle-- but you've got to watch out for that with most filters regardless.

Lenses / Re: I'm looking at rentig/buying a new lens for weddings
« on: July 07, 2014, 10:38:06 AM »
Many 2.8 lenses are the bread and butter of many wedding photographers (I'm looking at you 70-200 2.8 and 24-70 2.8 ) and will do well in churches and other dimly lit places. Although some receptions have even worse lighting (especially after the sun has set).

However, what camera body are you using? If you can crank up the ISO (and still capture acceptable pictures), then F 2.8 lenses will still probably do the trick for you. Otherwise you may want something with a bit larger aperture such as the 135 2.0, 50 1.4 or 85 1.2. As for what focal length will work for you, what are you planning on shooting? For group shots or in tight quarters you may want the 24 or 35. If you're looking at a person or two, the 50 may fit well, otherwise individual portraits you may want to look at the 85 or 135 (if the venue has enough room for you to scoot back that far).

Finally, don't forget that as the aperture get's bigger (especially anything under 2.0 such as 1.2 or 1.4), your DoF decreases dramatically and it'll be more difficult to get everything in focus. So, it's a bit of a balancing act between capturing enough light and actually keeping all of your subjects in focus, etc etc.

Please note that he is saying that it is an "Original Genuine Lithium Battery"... "Compatible with Canon". He's not claiming it is a legit Canon battery. He's saying that it is genuinely lithium and will work with Canon.

Sneaky, yes, but not exactly false. Anywho, I've purchased a knock off battery or two for my 7D and 5D over the years. My 7D battery stopped taking a charge after about a year, but my 5D battery I've had for about 2 years and it is still going strong. I get an error message from the camera warning me that it is not a legit Canon battery ("Communication is irregular"), but that's about it. It seems to perform just fine and I'll happily buy another knock off when this one bites the dust.

So, use your judgement on this one and decide if it's worth it for you as your mileage may vary.

Yeah, just don't show her that video on how to use a rocket air blower. It's too bad they weren't a bit more specific on some items too, but I suppose that video does cover the bare basics for people just starting out.

This lens looks solid, but after selling my 24-105 I swore I'd never buy f/4 or slower again. On top of that, I'm a huge fan of night time and star shots-- so besides the f/4, I'm curious to see if the coma will be well controlled. My fingers are crossed for a 2.8 non-IS to come out on the coattails of this lens.

(And yes, I know all about Samyang's lenses and I've owned one or two, but I'm just not a fan of the build quality and lack of AF)

I think it is worth posting if for no other reason than they are charging for the repairs. If it was a "Oh, you sent it in for X, but we also tidied up Y for no charge", I could appreciate that.

Charging for design flaws is another issue though.


My math might be wrong but a photo every 15 minutes for a month is 2880. ;-)

Otherwise thank you very much for the links and comments.

Also thanks to the others for the suggestions. Ill look into the gopro, and will be doing some testing before I actually break earth.

Good call! For some reason I left the 15 minutes in there when I punched it into the calculator. You know, off by a factor of 15. Close enough for gov't work ;)

The lighting triggers are usually a photocell of some sort (think about the light fixture over your garage) hooked up to a microcontroller or something to read the light levels. This controller then is hooked up to a transistor or a relay to trigger the camera. There are circuits you can make without the microcontroller, but it takes a bit more work to be honest.

Regardless, back to the original question: I'm not sure if a cored remote shutter release wired to two cameras will work. If so, splice your wire, hook it up and you're set (MF though, AF will delay things as the camera tries to focus). If that doesn't work, I'd look at using a two pole (or "double throw") relay. Basically it's one relay that has two independent outputs. It should trigger the cameras at the same time while keeping them electrically separate from each other (ie no touching of spliced wires). You'll need something to trigger the relay, but that can be as simple as a 9V battery and your thumb if you don't need super precise timing.

I use 1 double throw relay to control 2 flashes to fire at the same time (and they are muuuch faster than a camera shutter) and it works great. The link below is a picture I took with this set up. 2 flashes almost directly to the right and to the left of the wine glass in a darkened room.

You do realize that every 15 minutes for a month is 43,200 photos, right? Multiply that by 3 cameras and you're over 125,000 photos. Even will relattively small file sizes, that's still a lot of space you'll need to store things.

Obviously if you take a picture every 30 minutes (instead of 15) you can halve that. With no construction going on at night you could make a circuit to stop taking pictures after dark (plus the pictures at night will probably turn out poorly)-- I'd look at incorporating an Arduino or a similar microcontroller to control things.

Finally, I pulled up a couple of articles that I glanced at a long time ago. I don't know if they will be of much help, but they might get you pointed in the right direction.

FTb-n that's a pretty slick set up you have there, I may have to steal the idea!

I have the PeakDesign Capture Clip (the model before their current one-- mine doesn't have a female thread to screw the whole assembly onto a tripod or whatever it is that the latest one does).

All in all, I love it. It's great when you have a back pack for mounting your camera on the should strap-- which works well for me since I love hiking. For a heavier lens (5D3 + 70-200 2.8) I do need to tighten up my belt if I'm not using my backpack as it will try to pull my pants down, and with the clip in the vertical position it does dig in a bit. I haven't tried their pad (or FTb-n's idea above), but if the pad works as advertised, I would recommend it for heavier lenses if you're using your belt. If you're using a backpack shoulder strap, heavier lenses still work pretty darn well.

Anywho, long story short (too late?) it works well, I wish it cost less so I could buy another, but overall I'm happy with it. The plate is basically permanently attached to the bottom of my camera and the clip is either on my belt or backpack whenever I am out shooting. I haven't seen a reason to look into any other system since I picked the Capture Clip up. It securely holds the camera out of the way when you don't need it and it's easy to grab the camera when you do.

EOS Bodies - For Stills / Re: Dual CF or Combo memory slots?
« on: January 02, 2014, 05:58:14 PM »
I personally like the set up for previewing and culling images.

I use the SD for low res .jpg's and the CF for the full sized RAW images. This way I can quickly sort through the .jpg's and figure out which pictures are worth going back and editing and which ones can be tossed without having to open up the RAW files (which takes a second or two longer... but multiple that by 300 images and the savings adds up).


CPS Loaners. With Gold, you can try out a body or lens for a little over a week for free. I think any model, one time. Free shipping to you (you pay the shipping back). I think with gold, shipping is free 1 way for everything.

I signed up when I needed a repair and it paid for itself.

Ah, I forgot about the loaners-- that might be fun. It's too bad I'm not closer to one of their centers so I could skip out on the shipping!

Are there any other benefits of joining CPS? That is, none of my gear has needed repairs and while cleaning is free a couple of times a year, shipping is not (if I recall)-- so it pretty much cancels out on my end.

So, besides a fancy neck strap, is there anything else an amateur photog like me is forgetting? I've read through the list, but I didn't feel like anything jumped out at me.

EOS Bodies / Re: EOS 5D Mark III & Third Party Batteries
« on: December 12, 2013, 10:54:34 AM »
In my 7D and 5DIII I've used a number of 3rd party batteries without any issues. I had one that refused to charge after a year or so-- but up until then it worked great-- and for something like $10 I can't complain.

One thing I have noticed on my 5DIII is that the camera pops up a message saying there are "communication errors" (or something similar) when I pop in my 3rd party battery and the battery meter is not functional. But later during the shoot I'll notice that the battery meter is working just fine and is accurately reading the battery. I'm not sure if it is just my camera or what, but it's a pretty minor annoyance I can deal with for saving $70 a battery.

PowerShot / Re: Intervalometer Question
« on: October 28, 2013, 01:25:22 PM »
Cool, I hope it works out well for you!

Pages: [1] 2 3 ... 6