October 01, 2014, 10:39:31 PM

Author Topic: A little mod I came up with  (Read 1197 times)

digital paradise

  • Canon 70D
  • ****
  • Posts: 284
    • View Profile
    • Zenon Char Photography
A little mod I came up with
« on: December 09, 2012, 01:44:11 PM »
Using the ST-E3-RT is wonderful. Before going Canon RT I had a transmitter mounted to my Sekonic L-358 and fired my flashes via a receiver on the camera. That all changed with the Canon transmitter.

I now use Auto Reset Cordless Flash mode on my L-358. Carrying around the Transmitter was a pain when I needed two hands. I cut a spare mini stand (the one that comes with a flash) down to size and attached a spare Black Rapid connector. It now hangs from my belt or belt loop and I make all the adjustments at location. When done I just pop the transmitter on the camera.

This is my second mod. It was hard to lock the foot on the generic mini stand and I did not want to wreck the rubber seal. I cut up the foot that came with the flash and ordered a new one from Canon.

« Last Edit: December 09, 2012, 01:50:25 PM by digital paradise »

canon rumors FORUM

A little mod I came up with
« on: December 09, 2012, 01:44:11 PM »