May 23, 2013, 10:40:17 PM

Author Topic: Canon BG-E7 BATTERY GRIP PROBLEM  (Read 489 times)

lukemather

  • PowerShot G15
  • **
  • Posts: 1
    • View Profile
Canon BG-E7 BATTERY GRIP PROBLEM
« on: February 07, 2013, 05:20:56 AM »
Hello I am new to the forum so hello, I have a canon 7d and recently purchased a Canon BG-E7 battery grip for my camera. The problem is that it all fits together and screws up tight but unless I put pressure on top of my camera pushing it down onto of the grip it wont power on. It appears that the pins inside the battery comportment are not long enough , has anyone had any issues like this with an original canon BG-E7 battery grip .

Thank you

canon rumors FORUM

Canon BG-E7 BATTERY GRIP PROBLEM
« on: February 07, 2013, 05:20:56 AM »

J.R.

  • 6D
  • *****
  • Posts: 624
    • View Profile
Re: Canon BG-E7 BATTERY GRIP PROBLEM
« Reply #1 on: February 07, 2013, 07:48:11 AM »
Never had a problem with the BG-E7 on the 7D - fitted perfectly.
5D3 ǀ 6D ǀ 40 f/2.8 ǀ 50 f/1.4 ǀ 100 f/2.8 Macro ǀ 135 f/2L ǀ 24-70 f/2.8 II L ǀ24-105 f/4L IS ǀ 70-200 f/4L ǀ 100-400 f/4.5-5.6L IS ǀ RX100

Everyone can see through a brick wall in time

paul13walnut5

  • 1D Mark IV
  • ******
  • Posts: 987
    • View Profile
Re: Canon BG-E7 BATTERY GRIP PROBLEM
« Reply #2 on: February 07, 2013, 08:53:15 AM »
Mine fits fine apart from the horrible compromising of the weather sealing.

Had one issue where the cameras front control dial wouldn't operate with grip att.  A hair accross the pins was causing the problem.

The pins are sprung, if you have to apply force then something is wrong somewhere.
Canon 7D, T3i, EOS M, EOS 3, GoPro HD Hero & Hero 2, powershot sx230 hs,  Canon 70-200 f2.8 L, Canon 100mm f2.0, Sigma 70mm f2.8 Macro,  Canon 50mm f1.8, Canon 22mm f2.0, Sigma 18-50 f2.8, Tokina 11-16 f2.8, Lensbaby Composer, Holga HL

canon rumors FORUM

Re: Canon BG-E7 BATTERY GRIP PROBLEM
« Reply #2 on: February 07, 2013, 08:53:15 AM »