December 19, 2014, 03:27:50 PM

Author Topic: How would you achieve this look in Lightroom?  (Read 5114 times)

jordancslee

  • SX60 HS
  • **
  • Posts: 4
    • View Profile
How would you achieve this look in Lightroom?
« on: May 02, 2013, 01:46:22 AM »
So I really like the post work this photographer uses on her photos, but I can't quite place my finger on what techniques were used to achieve the look. Here's an example:

https://www.facebook.com/photo.php?fbid=10151375869157124&set=a.10151043132512124.423771.597667123&type=1&theater

Can anyone give me some pointers as to how I might get this feel using Lightroom 4?

Thanks!
Jordan

canon rumors FORUM

How would you achieve this look in Lightroom?
« on: May 02, 2013, 01:46:22 AM »

markojakatri

  • Power Shot G7X
  • **
  • Posts: 18
    • View Profile
    • Marko & Katri Photography
Re: How would you achieve this look in Lightroom?
« Reply #1 on: May 02, 2013, 01:57:59 AM »
Short answer: you need to raise your black levels to get that faded effect. It can be done with VSCO effects at least.


Quasimodo

  • 1D Mark IV
  • ******
  • Posts: 963
  • Easily intrigued :)
    • View Profile
    • 500px.com
Re: How would you achieve this look in Lightroom?
« Reply #2 on: May 02, 2013, 02:09:18 AM »
So I really like the post work this photographer uses on her photos, but I can't quite place my finger on what techniques were used to achieve the look. Here's an example:

https://www.facebook.com/photo.php?fbid=10151375869157124&set=a.10151043132512124.423771.597667123&type=1&theater

Can anyone give me some pointers as to how I might get this feel using Lightroom 4?

Thanks!
Jordan

To me it has this very instagram feel to it. Not sure how you acheive it in lightroom, but I have seen that it has been covered as a topic in several photoshop magazines lately, so I guess that googling instagram effect for lightroom would yield some result?:)
1Dx, 5x600 EX RT, ST-E3Canon:16-35L II,  24-105L , 70-200L IS II, 135L, 100L, 2x III TC, EF 25II, 40 F2.8 STM, Sigma 35 F1.4 Art, Sigma 50 F1.4 Art, Sigma 85 F1.4, Sigma 150-500.
Canon A-1, 199A, FD: 24/2.8, 35/2.0, 100/2.8, Vivitar 400/5.6 Mamiya RZ67 pro ii, 50,110,180
www.500px.com/gerhard1972

cleon

  • SX60 HS
  • **
  • Posts: 2
    • View Profile
Re: How would you achieve this look in Lightroom?
« Reply #3 on: May 02, 2013, 02:41:21 AM »
You can use Tone Curve in Lightroom, here's an example: http://youtu.be/7rl1hYgE-nQ

Cleon Santos

dirtcastle

  • Canon 6D
  • *****
  • Posts: 391
    • View Profile
    • Eric Nord Flickr Page
Re: How would you achieve this look in Lightroom?
« Reply #4 on: May 02, 2013, 03:26:32 AM »
Great tutorial. Thanks for posting!

nightbreath

  • Canon 7D MK II
  • *****
  • Posts: 456
    • View Profile
    • Свадебный фотограф в Днепропетровске
Re: How would you achieve this look in Lightroom?
« Reply #5 on: May 02, 2013, 04:11:06 AM »
So I really like the post work this photographer uses on her photos, but I can't quite place my finger on what techniques were used to achieve the look. Here's an example:

https://www.facebook.com/photo.php?fbid=10151375869157124&set=a.10151043132512124.423771.597667123&type=1&theater

Can anyone give me some pointers as to how I might get this feel using Lightroom 4?

Thanks!
Jordan
There are lots of Lightroom tutorials out there, so you need to dig deeper. The picture you provided has intense color changes (as well as raised shadows), so there's no manual how to achieve the same effect, it depends on the original file you edit. I suggest you to start from the logic and application results of each slider individually  :)
« Last Edit: May 02, 2013, 04:38:13 AM by nightbreath »
Wedding photography. My personal website: http://luxuryphoto.com.ua

VitorMachado

  • PowerShot G1 X II
  • ***
  • Posts: 54
    • View Profile
Re: How would you achieve this look in Lightroom?
« Reply #6 on: May 04, 2013, 02:09:50 AM »
This look can be achieved with tone curves and some contrast, but, I don't think this exact photo was manually edited. There are film presets out there that give you a very realistic vintage/film look with a click of a mouse. Useful for people who don't have that eye for the film look. These presets are everywhere but VSCO (as stated above) definitely makes the best set in my opinion. They can be very useful in bulk editing and/or old school shoots per say.
6D | 60D | 24 f/1.4L II | 50 f/1.2L | 40 f/2.8
http://www.flickr.com/photos/vitormachadophotography/

canon rumors FORUM

Re: How would you achieve this look in Lightroom?
« Reply #6 on: May 04, 2013, 02:09:50 AM »

dirtcastle

  • Canon 6D
  • *****
  • Posts: 391
    • View Profile
    • Eric Nord Flickr Page
Re: How would you achieve this look in Lightroom?
« Reply #7 on: May 04, 2013, 04:14:09 AM »
In addition to raising the shadow levels, it looks like they sampled that green color and used it as the shadow tint in split toning.

zim

  • 1D Mark IV
  • ******
  • Posts: 793
    • View Profile
Re: How would you achieve this look in Lightroom?
« Reply #8 on: May 04, 2013, 05:00:51 AM »
Dustin Abbott was kind enough to pont me in the direction of these

http://www.adobelightroompresets.net/lightroom-presets/ultrafaded-presets/

Looks like a close match to me

canon rumors FORUM

Re: How would you achieve this look in Lightroom?
« Reply #8 on: May 04, 2013, 05:00:51 AM »