April 19, 2014, 04:26:37 AM

Author Topic: Step-up ring question  (Read 1661 times)

adhocphotographer

  • 6D
  • *****
  • Posts: 465
    • View Profile
    • An ad hoc photographer
Step-up ring question
« on: June 28, 2013, 06:28:05 AM »
This is probably a stupid question but...  If i put a step-up ring (58 to 77mm) on my lens and left it on, would i still be able to put the 58mm lens cap on or would i need to use a 77mm one?

All my filters are 77mm, so i would probably just leave the step-up ring attached...  :)
5D MkIII + an every expanding array of lenses and accessories!
-------www.adhocphotographer.com--------

canon rumors FORUM

Step-up ring question
« on: June 28, 2013, 06:28:05 AM »

insanitybeard

  • EOS M2
  • ****
  • Posts: 286
    • View Profile
Re: Step-up ring question
« Reply #1 on: June 28, 2013, 06:35:12 AM »
With a 58-77mm step up ring attached, you would then need to use a 77mm lens cap as the filter thread (where the lens cap locks in) becomes 77mm with the step up ring fitted.
7D / EF-S 10-22 / 17-40L / 70-200 f4L IS / EF-S 60 macro

adhocphotographer

  • 6D
  • *****
  • Posts: 465
    • View Profile
    • An ad hoc photographer
Re: Step-up ring question
« Reply #2 on: June 28, 2013, 07:25:31 AM »
With a 58-77mm step up ring attached, you would then need to use a 77mm lens cap as the filter thread (where the lens cap locks in) becomes 77mm with the step up ring fitted.

Thanks, i thought as much...  thanks for confirming! :)
5D MkIII + an every expanding array of lenses and accessories!
-------www.adhocphotographer.com--------

neuroanatomist

  • CR GEEK
  • *******
  • Posts: 12779
    • View Profile
Re: Step-up ring question
« Reply #3 on: June 28, 2013, 07:35:32 AM »
The problem is that the step-up ring precludes the use of the lens hood...and you should be using the hood, if possible.
EOS 1D X, EOS M, and lots of lenses
______________________________
Flickr | TDP Profile/Gear List

gferdinandsen

  • Rebel T5i
  • ****
  • Posts: 190
  • was mich nicht umbringt, macht mich stärker
    • View Profile
    • Home
Re: Step-up ring question
« Reply #4 on: June 28, 2013, 08:25:43 AM »
The problem is that the step-up ring precludes the use of the lens hood...and you should be using the hood, if possible.


I have always found that a CPL usually precludes the use of a hood...unless you want to always take the hood off/reattach it after recomposing
1v HS, 5D3, 40D (IR), G1-X, 17-40L, 24-70L (Mk II), 24-105L, 70-200L (2.8 Mk 1), 24 TS-E L (Mk 1), 45 TS-E, 50 1.2L, 100 L Macro -- CPS Gold Membership

neuroanatomist

  • CR GEEK
  • *******
  • Posts: 12779
    • View Profile
Re: Step-up ring question
« Reply #5 on: June 28, 2013, 08:58:42 AM »
I have always found that a CPL usually precludes the use of a hood...unless you want to always take the hood off/reattach it after recomposing

Maybe I just have longer fingers, but I have no issues.  Certainly not with a 24-70, etc., but even with the 70-200 II it's not an issue for me to rotate the CPL with the hood attached.
EOS 1D X, EOS M, and lots of lenses
______________________________
Flickr | TDP Profile/Gear List

adhocphotographer

  • 6D
  • *****
  • Posts: 465
    • View Profile
    • An ad hoc photographer
Re: Step-up ring question
« Reply #6 on: June 28, 2013, 09:45:01 AM »
The problem is that the step-up ring precludes the use of the lens hood...and you should be using the hood, if possible.

I have always found that a CPL usually precludes the use of a hood...unless you want to always take the hood off/reattach it after recomposing

It is for a CPL filter and i don't use the hood with it, if i need to prevent flair i use my hand or lens cap to shield the lens! :)  I always try to use a hood, but it isn't always the case! :)
5D MkIII + an every expanding array of lenses and accessories!
-------www.adhocphotographer.com--------

canon rumors FORUM

Re: Step-up ring question
« Reply #6 on: June 28, 2013, 09:45:01 AM »

neuroanatomist

  • CR GEEK
  • *******
  • Posts: 12779
    • View Profile
Re: Step-up ring question
« Reply #7 on: June 28, 2013, 10:10:35 AM »
It is for a CPL filter and i don't use the hood with it, if i need to prevent flair i use my hand or lens cap to shield the lens! :)  I always try to use a hood, but it isn't always the case! :)

You had mentioned leaving the step-up ring on all the time...

i would probably just leave the step-up ring attached...

I'd just put the step up ring on when you need to use the CPL.
EOS 1D X, EOS M, and lots of lenses
______________________________
Flickr | TDP Profile/Gear List

DFM

  • PowerShot G16
  • **
  • Posts: 40
  • Adobe Community Professional
    • View Profile
Re: Step-up ring question
« Reply #8 on: June 30, 2013, 08:06:10 AM »
Another option (assuming your lens isn't ultra-wide-angle) is to buy a 77mm rubber lens hood - the circular design that fold back for storage, around $15 - and screw it onto the front of the CPL. You can then adjust the CPL by turning the entire hood, and when the filter's not wanted it'll fit onto your step-up ring too.

It is for a CPL filter and i don't use the hood with it, if i need to prevent flair i use my hand or lens cap to shield the lens! :)  I always try to use a hood, but it isn't always the case! :)

gferdinandsen

  • Rebel T5i
  • ****
  • Posts: 190
  • was mich nicht umbringt, macht mich stärker
    • View Profile
    • Home
Re: Step-up ring question
« Reply #9 on: June 30, 2013, 09:00:40 AM »
I have always found that a CPL usually precludes the use of a hood...unless you want to always take the hood off/reattach it after recomposing

Maybe I just have longer fingers, but I have no issues.  Certainly not with a 24-70, etc., but even with the 70-200 II it's not an issue for me to rotate the CPL with the hood attached.

Much fewer problems with the new 24-70, but the old one had a hood nearly identical to the 70-200...a much larger hood.
1v HS, 5D3, 40D (IR), G1-X, 17-40L, 24-70L (Mk II), 24-105L, 70-200L (2.8 Mk 1), 24 TS-E L (Mk 1), 45 TS-E, 50 1.2L, 100 L Macro -- CPS Gold Membership

canon rumors FORUM

Re: Step-up ring question
« Reply #9 on: June 30, 2013, 09:00:40 AM »