December 15, 2017, 01:58:59 AM

Author Topic: Pixel King help  (Read 1859 times)

amoore00357

  • PowerShot G1 X II
  • ***
  • Posts: 21
Pixel King help
« on: March 28, 2014, 08:06:11 PM »
I just ordered the pixel king transceiver and 2 receivers (not the new Pro models) . I have three canon 430 ex II's.

I don't know if I'm missing something but I have both receivers set to channel one and both group A. Both flashes on the receivers are turned on and set to ettl.

The problem comes up with the transceiver part. I have the 430 ex II turned on and set to ettl. The transceiver is turned on to group A channel 1. So when I take a test picture both receiver flashes fire but the flash on the transceiver does not fire. Am i missing something on the set up or do I have a defective transceiver? (I switched the flashes around so its not a flash problem)

Hope this is enough information for you to understand my problem. Thanks for the help.   
6D,  60D,  24-105L,  70-200 f/2.8 L IS II,  17-85 f/4-5.6,  Sigma 10-20 f/3.5,  60 f/2.8 macro

canon rumors FORUM

Pixel King help
« on: March 28, 2014, 08:06:11 PM »

amoore00357

  • PowerShot G1 X II
  • ***
  • Posts: 21
Re: Pixel King help
« Reply #1 on: March 28, 2014, 08:11:30 PM »
I forgot to say I am using a Canon 6D.
6D,  60D,  24-105L,  70-200 f/2.8 L IS II,  17-85 f/4-5.6,  Sigma 10-20 f/3.5,  60 f/2.8 macro

canon rumors FORUM

Re: Pixel King help
« Reply #1 on: March 28, 2014, 08:11:30 PM »