July 01, 2016, 11:44:28 AM

Author Topic: Cold shoe recommendation for 600EX-RT  (Read 2295 times)

wsheldon

  • EOS M3
  • ****
  • Posts: 207
    • sheldon-photo
Cold shoe recommendation for 600EX-RT
« on: August 06, 2014, 11:41:18 AM »
I'm finding it difficult to reliably attach my 600EX-RT's to generic cold shoes (e.g. http://www.bhphotovideo.com/c/product/743061-REG/Vello_CS_Universal_Accessory_Shoe_Mount.html/prm/alsVwDtl), and last week I had a flash slip off and hit the floor after I though it was tight. No damage, amazingly, but very worrying since these flashes aren't cheap!

Has anyone found a cold shoe that works well with Canon's quick-release mounts on the 600EX and 430EX-II? I didn't have this much trouble with my old 580EX and 430EX with the screw plates.

Thanks.
Canon 6D & 50D, nice set of lenses

canon rumors FORUM

Cold shoe recommendation for 600EX-RT
« on: August 06, 2014, 11:41:18 AM »

neuroanatomist

  • CR GEEK
  • ************
  • Posts: 19069
Re: Cold shoe recommendation for 600EX-RT
« Reply #1 on: August 06, 2014, 12:11:42 PM »
I use RRS cold shoes, which allow the locking foot/pin of the flash to do their job.  I haven't used them, but I believe the Frio cold shoe allows the same.
EOS 1D X, EOS M2, lots of lenses
______________________________
Flickr | TDP Profile/Gear List

eli452

  • Rebel T6i
  • ****
  • Posts: 136
  • When you have to shoot shoot don't talk
Re: Cold shoe recommendation for 600EX-RT
« Reply #2 on: August 06, 2014, 12:13:41 PM »
7D; 8-15mm f/4L Fisheye; 100mm f/2.8L macro; TS-E 24mm f/3.5L II; 24-105 f/4L; EF-S 10-22mm; 70-300mm f/4-5.6L; Milvus 50mm f/1.4, 600EX-RT & ST-E3-RT; lots more stuff.

wsheldon

  • EOS M3
  • ****
  • Posts: 207
    • sheldon-photo
Re: Cold shoe recommendation for 600EX-RT
« Reply #3 on: August 06, 2014, 12:34:25 PM »
Thanks. Those look really slick, and should be faster to use.
Canon 6D & 50D, nice set of lenses

pwp

  • Canon EF 300mm f/2.8L IS II
  • ********
  • Posts: 2081
Re: Cold shoe recommendation for 600EX-RT
« Reply #4 on: August 08, 2014, 02:54:10 AM »
eBay...do a search

-pw

Skirball

  • Canon 7D MK II
  • *****
  • Posts: 468
Re: Cold shoe recommendation for 600EX-RT
« Reply #5 on: August 08, 2014, 10:38:20 AM »
Well damn, I wasn't really planning on upgrading my cold shoes, but those RRS shoes look quite nice.

OP: I've had no major complaints with the Stroboframe shoes, you can get them for about $8 on Amazon.  Not as slick as those RRS, but a fraction of the cost.

JonAustin

  • Canon 7D MK II
  • *****
  • Posts: 541
  • Telecom / IT consultant and semi-pro photog
    • Austin & Austin Professional Services, LLC
Re: Cold shoe recommendation for 600EX-RT
« Reply #6 on: August 08, 2014, 11:52:41 AM »
My light stands / umbrella brackets are all the rather pedestrian Impact brand, so the cold shoes are nothing special.

More to prevent electrical shorts (since the shoes are metal, probably aluminum), I've lined the inside of the shoes with some of that plasticky transparent shipping tape.

The beneficial unintended consequences of the tape are that the flash heads slide in and out of the shoes more easily, and also seem to stay more snugly in place when I tighten the set screws.
« Last Edit: August 08, 2014, 12:12:06 PM by JonAustin »
Canon gear.

canon rumors FORUM

Re: Cold shoe recommendation for 600EX-RT
« Reply #6 on: August 08, 2014, 11:52:41 AM »

Jim Saunders

  • 5DSR
  • *******
  • Posts: 1015
    • HHA Photo @ 500px
Re: Cold shoe recommendation for 600EX-RT
« Reply #7 on: August 08, 2014, 12:15:47 PM »
The cheap ebay ones (square, ribbed sides) are rubbish.  Believe me, I tried them.

Jim
See what I see: 6500K, 160 cd/m^2, ICC 2, gamma 2.2.

wsheldon

  • EOS M3
  • ****
  • Posts: 207
    • sheldon-photo
Re: Cold shoe recommendation for 600EX-RT
« Reply #8 on: August 08, 2014, 02:40:45 PM »
Well damn, I wasn't really planning on upgrading my cold shoes, but those RRS shoes look quite nice.

Yeah, they are. I just bought a set for my 600's based on recommendations here and they arrived today. The feet slide right in and lock down tight - exactly what I was hoping for to both speed up and secure attaching flashes to stands. Like everything RRS it would be great if they weren't 4x the price of competing kit, but you sure can't knock the quality and service.
Canon 6D & 50D, nice set of lenses

scottkinfw

  • 5DSR
  • *******
  • Posts: 1081
    • www.kasden.smug.com
Re: Cold shoe recommendation for 600EX-RT
« Reply #9 on: August 08, 2014, 04:16:16 PM »
I use the rrs cold shoe and it does the job well, and securely.

When the flash locks in, you know it is in.

sek.


Well damn, I wasn't really planning on upgrading my cold shoes, but those RRS shoes look quite nice.

Yeah, they are. I just bought a set for my 600's based on recommendations here and they arrived today. The feet slide right in and lock down tight - exactly what I was hoping for to both speed up and secure attaching flashes to stands. Like everything RRS it would be great if they weren't 4x the price of competing kit, but you sure can't knock the quality and service.
Cameras: 1DXII,5D III, 5D II, EOS M  Lenses:  24-70 2.8 II IS, 24-105 f4L, 70-200 f4L IS, 70-200 f2.8L IS II, EF 400 5.6L, 300 2.8 IS II, Samyang 14 mm 2.8 Flashes: 600EX-RT X 2, ST-E3-RT
Plus lots of stuff that just didn't work for me

RGF

  • Canon EF 300mm f/2.8L IS II
  • ********
  • Posts: 2197
  • How you relate to the issue, is the issue.
Re: Cold shoe recommendation for 600EX-RT
« Reply #10 on: August 08, 2014, 04:47:11 PM »
I purchased a used Canon Off-Camera Shoe Adapter and that works great.  I got for around $10 from B&H.


You can also get used off-shoe cords ($12.95 at B&H) can cut off the cord and keep the shoe
« Last Edit: August 08, 2014, 04:51:09 PM by RGF »

canon rumors FORUM

Re: Cold shoe recommendation for 600EX-RT
« Reply #10 on: August 08, 2014, 04:47:11 PM »