December 11, 2017, 06:15:08 PM

Author Topic: Godox Trigger Updated Firmware  (Read 9429 times)

mazza1967

  • PowerShot G1 X II
  • ***
  • Posts: 23
Godox Trigger Updated Firmware
« on: May 08, 2017, 01:54:52 PM »
Godox just sent me v20 update for the x1c triggers my M5 now works with all my godox via the trigger :) not on the site yet  but if anyone needs Pm and il will mail it to you :) I guess this will cover  the Mkiv 5d and new models too

canon rumors FORUM

Godox Trigger Updated Firmware
« on: May 08, 2017, 01:54:52 PM »

BasXcanon

  • EOS Rebel 300D
  • ***
  • Posts: 62
Re: Godox Trigger Updated Firmware
« Reply #1 on: May 08, 2017, 02:35:00 PM »
Thats great!

Will the XT-c now work with the powershot G-series aswell?
Since the M5 runs with powershot software if I have to believe the magic latern guys.


mazza1967

  • PowerShot G1 X II
  • ***
  • Posts: 23
Re: Godox Trigger Updated Firmware
« Reply #2 on: May 09, 2017, 06:01:38 AM »
 It sure what models it updates as Godox were responding to me mail them week in week out to get an update for the M5 ( prob made no difference) they didn't tell me what cameras it updated but I guess anything launched late last year would be included at least up to the M5 launch anyway

mazza1967

  • PowerShot G1 X II
  • ***
  • Posts: 23
Re: Godox Trigger Updated Firmware
« Reply #3 on: May 19, 2017, 12:27:47 PM »
Okay so tested the V20 today  and it will not work with the 6d removes camera control ,  Works with M5 fine , I have rolled back the driver to V19 and all okay so now running 2 triggers 1 with V19 for 6D and The other V20 for the M5

BasXcanon

  • EOS Rebel 300D
  • ***
  • Posts: 62
Re: Godox Trigger Updated Firmware
« Reply #4 on: May 28, 2017, 04:44:24 AM »
That is not cool at all!, I was actually reconsidering the M5 again.

Besisika

  • EOS 7D Mark II
  • *****
  • Posts: 582
  • How can you stand out, if you do like evrybdy else
Re: Godox Trigger Updated Firmware
« Reply #5 on: May 28, 2017, 07:35:38 AM »
I have two of them, one V18 and the other V20 and both work perfectly on 1DX II and 5D III. I had trouble with V19 but after sometime playing with the options I upgraded it to V20, still didn't work, then all of a sudden started working. I don't even know what did I do. I guess something was not connecting properly inside. Both work well for at least a week now.

BasXcanon

  • EOS Rebel 300D
  • ***
  • Posts: 62
Re: Godox Trigger Updated Firmware
« Reply #6 on: May 28, 2017, 12:33:38 PM »
Besisika? Is there any chance I can get the V20 file from you?

canon rumors FORUM

Re: Godox Trigger Updated Firmware
« Reply #6 on: May 28, 2017, 12:33:38 PM »

Besisika

  • EOS 7D Mark II
  • *****
  • Posts: 582
  • How can you stand out, if you do like evrybdy else
Re: Godox Trigger Updated Firmware
« Reply #7 on: May 28, 2017, 02:37:42 PM »
I just sent it to you. This is the same as mazza1967 sent to me. It is a Windows version.

BasXcanon

  • EOS Rebel 300D
  • ***
  • Posts: 62
Re: Godox Trigger Updated Firmware
« Reply #8 on: May 28, 2017, 03:02:33 PM »
Thank you Besisika!

So if the V20 does not work with my 80D I can easily reverse the version via the Godox G1 client?

mazza1967

  • PowerShot G1 X II
  • ***
  • Posts: 23
Re: Godox Trigger Updated Firmware
« Reply #9 on: May 28, 2017, 05:14:38 PM »
Hi  Sorry only just got you message Ive been off shooting , I am getting on fine with  triggers set up for each camera  , I guess Godox are still refining it which is prob why its not on their own download page , and yes as long as you save a  a version v18 or 19 you  can just respect it and replace v20 thats what I did , I had assumed it would work with 6d but had issues with remote power control on groups ,  V20 seems to work fine with the M5 Just ensure you have a and earlier V to roll it back to


BasXcanon

  • EOS Rebel 300D
  • ***
  • Posts: 62
Re: Godox Trigger Updated Firmware
« Reply #10 on: May 28, 2017, 05:53:09 PM »
It is alright Mazza!

I need a 2nd X1-C anyway.
I will let the forum know if the version from Basisika works on the 80D when I receive my 2nd transmitter and install V20 on it.

Arctic-Winds

  • PowerShot G7 X Mark II
  • **
  • Posts: 7
Re: Godox Trigger Updated Firmware
« Reply #11 on: June 01, 2017, 09:18:12 AM »
Hi Besisika. Would you be able to send me a copy of the firmware too please?

mihazero

  • PowerShot G7 X Mark II
  • **
  • Posts: 17
Re: Godox Trigger Updated Firmware
« Reply #12 on: June 08, 2017, 07:05:01 PM »
I have just tried new v20 (beta) firmware (thanks Besisika) and here is what i learned.

On 5D mark IV TTL still overexposes, but not as much as it used to. Before my flash was always reading F8.0, regardless what my actual f-stop was, hence trying to compensate. With new firmware it reads f-stop thats set on camera, but still overexposes, by at least 3 stops. Manual has worked fine before, so, nothing new there. AF Assist lamp didnt work for me before, still doesnt.

I hope final version of firmware will fix these issues.

canon rumors FORUM

Re: Godox Trigger Updated Firmware
« Reply #12 on: June 08, 2017, 07:05:01 PM »

BasXcanon

  • EOS Rebel 300D
  • ***
  • Posts: 62
Re: Godox Trigger Updated Firmware
« Reply #13 on: June 12, 2017, 10:49:29 AM »
Hi guys, there was a problem with the delivery of the 2nd XT1C that I ordered.
But it finally came it. It seems to work with the 80D. V20 shows in the menu that the TT350 zoom head should be able to control from the transmitter, but I don't got that working yet.

For all functions it seems to work.

BTW Mihazero, what lenses are you using on the 5dm4??

mihazero

  • PowerShot G7 X Mark II
  • **
  • Posts: 17
Re: Godox Trigger Updated Firmware
« Reply #14 on: June 12, 2017, 11:32:06 AM »
BTW Mihazero, what lenses are you using on the 5dm4??

Doesnt matter which one. Canon 35mm, 50 plastic fantastic, 100mm macro, 70-200. Always the same thing.

canon rumors FORUM

Re: Godox Trigger Updated Firmware
« Reply #14 on: June 12, 2017, 11:32:06 AM »