Close Menu

    Firmware: Canon EOS-1D X Mark III v1.1.0

    By 12 Comments1 Min Read Canon Firmware
    eos1dxmark3 728x462 - Firmware: Canon EOS-1D X Mark III v1.1.0

    Canon has released new firmware for the EOS-1D X Mark III.

    Firmware Version 1.1.0 incorporates the following enhancement and fixes:

    • The option to capture full HD movies and 4K UHD movies in 23.98p frame rate has been added.
    • The communication speed has been improved when connected via wired LAN.
    • The “Browser Remote” function has been added.
    • The function to transfer only protected images has been added.
    • Corrects the phenomenon in which, when the electronic level is set to “Show” in the viewfinder display, in rare cases, the camera may freeze when operating the AF-ON button or shutter button.
    • Corrects the phenomenon in which the Custom Shooting Mode settings may change when the shooting mode is switched.

    Download firmware v1.1.0 for the Canon EOS-1D X Mark III

    Some of our articles may include affiliate links. If you purchase through these links, we may earn an affiliate commission at no extra cost to you.

    Go to discussion...

    Share.

    Related Posts

    12 comments

    3. Updated mine also. Transfer via gigabit ethernet was already much faster than my 1DX II so it will be interesting to see if there is a further noticeable increase in transfer speed (increased transfer speed via wired network is listed as one of the improvements).
    4. Updated mine also. Transfer via gigabit ethernet was already much faster than my 1DX II so it will be interesting to see if there is a further noticeable increase in transfer speed (increased transfer speed via wired network is listed as one of the improvements).
      I transferred couple Raw video files via usb type c and speed improvement is significant .
    5. Thank Visioncolor!, now I just need to shoot enough files to make this speed increase worthwhile. If it weren't for the pandemic, I would be transferring several hundred files from each of my 1DX family bodies several times per week shooting high school soccer :(
    7. Updated. Now we have 23.97 1080P
      Now it just remains to be seen if that 23.98 1080 is any good, it certainly isn't the MkII's strong point.

      I transferred couple Raw video files via usb type c and speed improvement is significant .
      The release notes don't mention USB-C, only increased speeds over wired LAN.
      "2. The communication speed has been improved when connected via wired LAN."
    8. Now it just remains to be seen if that 23.98 1080 is any good, it certainly isn't the MkII's strong point.


      The release notes don't mention USB-C, only increased speeds over wired LAN.
      "2. The communication speed has been improved when connected via wired LAN."
      The cable that comes with 1dx is it not usb type c? Anyways speed transfer increased i can tell u that
    9. The cable that comes with 1dx is it not usb type c? Anyways speed transfer increased i can tell u that
      Yes the cable that comes with the camera is a USB-C to USB-C IFC-100U Interface Cable, no that is not a LAN cable. You might think you are seeing a speed boost but that is not what Canon are saying they improved, they specifically refer to increased wired LAN speeds, that would be an Ethernet cable (no you don't get one with the camera) into the body LAN port which then normally plugs into a network switch, a router, or even a spare Ethernet port on a computer.
    10. Yes the cable that comes with the camera is a USB-C to USB-C IFC-100U Interface Cable, no that is not a LAN cable. You might think you are seeing a speed boost but that is not what Canon are saying they improved, they specifically refer to increased wired LAN speeds, that would be an Ethernet cable (no you don't get one with the camera) into the body LAN port which then normally plugs into a network switch, a router, or even a spare Ethernet port on a computer.
      That actually makes sence now @privatebydesign thank you for explaining it.
    11. So my MK III arrived today, still sporting the old firmware. All updated now but nowhere to take it to shoot, lol. First world problems and all that.
    12. Has anyone who had the freezing issue tested to see if this actually fixes it? Every report I read from people with that issue did not have the level activated so it doesn't seem like Canon has fixed the reported problem or didn't understand it in the first place. I guess the level problem must have been another problem but probably most 1DXIII shooters don't want an annoying level in their FOV when shooting action...I never saw any value of the level for shooting action which the 1DXIII is targeted at.

    Leave a comment

    Please log in to your forum account to comment