Canon Firmware

Firmware: Updates for the EF 400mm f/2.8L IS III and EF 600mm f/4L IS III are available

Canon has released new firmware for its latest super-telephoto lenses, the EF 400mm f/2.8L IS III USM and the EF 600mm f/4L IS III USM.

Firmware Version 1.1.2 incorporates the following enhancements:

  1. Increases the manual focus speed when the manual focus speed switch is set to 1 or 2. *The speed when the switch is set to 3 (slowest speed) will be unchanged.
  2. Improves the image stabilization effect during handheld shooting with a slow shutter speed when used with EOS 5D Mark IV, EOS 6D, or EOS R.

*Enables a full-time manual focus function during Servo AF when used with the EOS-1D X Mark II. The lens must be sent to the Factory Service Center in order for this function to be enabled.

If the lens’ firmware is already Version 1.1.2, it is not necessary to update the firmware.

The lens firmware version can be checked from the camera’s menu.

Download the firmware updates: EF 400mm f/2.8L IS III | EF 600mm f/4L IS III

Check out the EF 400mm f/2.8L IS III USM and EF 600mm f/4L IS III USM lenses at Adorama.