Adapter for Canon DSLRs to use RF lenses?

AlanF

Desperately seeking birds
CR Pro
Aug 16, 2012
12,440
22,871
It can't be ruled out for the future. We don't the nature of the flange interface and it might be possible to have some electrical compatibility as you can mount an EF on an RF flange so vice versa might be on. It also might be possible to have a lens system in the adaptor to compensate, or future generations of EF bodies might have a sensor that can switch between two positions.
 
Upvote 0

jolyonralph

Game Boy Camera
CR Pro
Aug 25, 2015
1,423
944
London, UK
www.everyothershot.com
It would probably be possible to build a manual-focus adaptor to fit RF lenses to an EF mount with some glass in it, but to do so you'd probably add a stop or so of light loss and/or huge image degradation, so why bother?

But from what I've read so far about the new high-speed data interface it would need some serious electronics in the adaptor (ie a DIGIC chip or similar) to deal with autofocus.

So, no, it'll never happen.
 
Upvote 0

koenkooi

CR Pro
Feb 25, 2015
3,628
4,203
The Netherlands
It would probably be possible to build a manual-focus adaptor to fit RF lenses to an EF mount [..]

Since all RF lenses are focus-by-wire, who is in charge of issuing focus commands, the lens or the camera, when turning the focus ring? If it's the camera, RF lenses would be fixed-focus on such an adapter.
 
Upvote 0
Jul 31, 2018
297
111
So to be clear, even if the adapter was made like an extension tube for maco photography (guess Canon has those),

not quite ... there are 2 major obstacles:
1.) EF mount has 44mm flange focal distance and RF lenses are designed for 20mm FFD [R-mount]. Therefore an adapter would need to have optical elements (glass lenses), which costs some IQ.
2.) Mount protocol/communication issues for RF to EF

We cannot imagine we would ever see an RF-EF adapter from Canon. Maybe some 3rd party company will attempt it, but especially issue #2 might be fairly tough to solve with reverse engineering.
 
Upvote 0
Mar 25, 2011
16,847
1,835
Thank you everyone for your replies. So to be clear, even if the adapter was made like an extension tube for maco photography (guess Canon has those), it would be safe to assume that the RF lens configuration would not be compatible with the current EF mount.
A extension tube would not work, the rear of the lens needs to sit closer to the sensor by over 50%. Only a optical element could do this, thd that takes space too. Its just not practical.
 
Upvote 0
The fact that Canon even built and produced a 28-70 f/2 zoom lens suggests that they are committed to the RF mount enough that we will see 5D and 1D type R bodies in the future. Until then, the reviews of the EOS R sound like it will do a fine job of capturing images with this lens. I have a feeling the rental houses will have a hard time keeping them in stock.
 
Upvote 0