Firmware for the Canon EOS-1D X Mark III coming in early April to address issue

Canon Rumors Guy

EOS 1D MK II
Jul 20, 2010
7,969
766
Canada
www.canonrumors.com
From Canon:
We have confirmed that the following phenomenon may occur during the use of the EOS-1D X Mark III digital SLR camera. A new firmware release is planned for early April; once the new firmware is ready, we will make an announcement on our website.
We sincerely apologize to users who may have experienced inconvenience due to this issue.
Phenomenon:
When the camera is used with the electronic level set to “Show” in the viewfinder display, in rare cases, the camera may not perform normally when operating the AF-ON button or shutter button.
Affected Product:
EOS-1D X Mark III (Firmware version 1.0.0)
Workaround:
Use the “Hide” setting for the electronic level in the viewfinder display.
Setting procedure: Menu / Set-up 2 tab / Viewfinder display / Electronic level* [Hide]
*Default setting: [Hide]
Support:
In early-April 2020, we plan to release a firmware update to address the phenomenon listed above.
Continue reading...
 
Last edited:

DaveGershon

I'm New Here
Dec 19, 2016
10
1
Great to hear this is fixed. Is Canon back in production on the 1Dx Mark III bodies? They have not been available since the first pre-order shipments when out.
 
Last edited:
  • Like
Reactions: Valvebounce

Valvebounce

EOS 5D SR
Apr 3, 2013
4,328
244
53
Isle of Wight
Hi Dave.
Great to hear what is fixed? Canon have just said a ’phenomenon’ has been identified and a firmware fix is in development, hopefully the phenomenon (dodoodedoody phenomenon dodoodedo) is the random sleep issue, but it might be something no one has spotted, perhaps the level does Knightrider, or the aperture flutters at you, or any one of a million other possibilities! :LOL::LOL:

Cheers, Graham.

ps, yes I’m already bored on the second day of our national Covid19 lockdown, lawn is mowed, lots of housework done!
 
Last edited:

Jack Jian

EOS M50
Feb 14, 2018
28
42
Hi Dave.
Great to hear what is fixed? Canon have just said a ’phenomenon’ has been identified and a firmware fix is in development, hopefully the phenomenon (dodoodedoody phenomenon dodoodedo) is the random sleep issue, but it might be something no one has spotted, perhaps the level does Knightrider, or the aperture flutters at you, or any one of a million other possibilities! :LOL::LOL:

Cheers, Graham.

ps, yes I’m already bored on the second day of our national Covid19 lockdown, lawn is mowed, lots of housework done!
Only 2nd day? Wait for some more days...
 

Attachments

GoldWing

Canon EOS 1DXMKII
Oct 19, 2013
180
136
Los Angeles, CA
en.wikipedia.org
Every issue addressed by early adopters are being fixed. So many here who yelled at me are not prevalent with their BIG feet in their mouths.

We saw this and much more and Canon is fixing.

Point moot as our Olympic contract was canceled. 2021 is just a slow let down. We were told to sit tight for a confirmed date.
 

TMHKR

EOS 700D
Sep 1, 2018
34
30
30
Does this address the lockup issue reported earlier with the 1DX III, or it's some new error users were not aware of?
Also, comments section on DPReview riddled with trolls, concern shills and whatabouters on this announcement :)
As that dude from Starship Troopers would say - It's afraid. It's afraid!
 
Dec 19, 2018
5
9
Hi Dave.
Great to hear what is fixed? Canon have just said a ’phenomenon’ has been identified and a firmware fix is in development, hopefully the phenomenon (dodoodedoody phenomenon dodoodedo) is the random sleep issue, but it might be something no one has spotted, ...
For what it's worth, I have a 1DX Mark III from the initial release and ran into the problem after 500 photos and notified Canon, then hit it again after about 1600 photos, but have not seen it since. I knew it was a problem but couldn't reproduce it. It was a very minor annoyance. Certainly nothing to be concerned about. My problem is similar to what Canon is describing, so I suspect my issue will be corrected with the firmware update.
 
  • Like
Reactions: Jethro

Architect1776

Defining the poetics of space through Architecture
Aug 18, 2017
524
473
118
Williamsport, PA
Hi Dave.
Great to hear what is fixed? Canon have just said a ’phenomenon’ has been identified and a firmware fix is in development, hopefully the phenomenon (dodoodedoody phenomenon dodoodedo) is the random sleep issue, but it might be something no one has spotted, perhaps the level does Knightrider, or the aperture flutters at you, or any one of a million other possibilities! :LOL::LOL:

Cheers, Graham.

ps, yes I’m already bored on the second day of our national Covid19 lockdown, lawn is mowed, lots of housework done!
I am on day 11 here in Williamsport, PA. I can go to office but it is discouraged. PS I work in a Hospital.
 

privatebydesign

Would you take advice from a cartoons stuffed toy?
Jan 29, 2011
8,223
1,580
119
Every issue addressed by early adopters are being fixed. So many here who yelled at me are not prevalent with their BIG feet in their mouths.

We saw this and much more and Canon is fixing.

Point moot as our Olympic contract was canceled. 2021 is just a slow let down. We were told to sit tight for a confirmed date.
I don’t see how addressing an obscure level issue addresses the complaints you made of poorer ISO performance above 800 (if I remember correctly) and worse AF hit rate than the 1DX MkII. In fact I see no mention of those ‘issues’ so I’m not sure why you are feeling so vindicated.
 
  • Like
Reactions: tron

tron

EOS 5D SR
Nov 8, 2011
4,440
701
the sad part is they have code for waveform as well :cry: Canon Please
You mean like the Exposure graph making capabilities of Canon's Technical Back E?

I had that with Canon EOS 620. But to tell the truth I did not use it much. I admired the fact that Canon EF system had capabilities to control aperture at 1/4 stop increments. This was revealed through this back.
 

privatebydesign

Would you take advice from a cartoons stuffed toy?
Jan 29, 2011
8,223
1,580
119
You mean like the Exposure graph making capabilities of Canon's Technical Back E?

I had that with Canon EOS 620. But to tell the truth I did not use it much. I admired the fact that Canon EF system had capabilities to control aperture at 1/4 stop increments. This was revealed through this back.
I understood, and I don’t know where from off the top of my head but it will have been a technical document years ago, that EF aperture control (and shutter speed) was step less, that is in Tv or P mode the aperture could be set at any intermediate aperture even if the resultant EXIF was rounded to familiar numbers.