December 19, 2014, 07:37:54 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - steliosk

Pages: [1] 2 3 ... 9
1
EOS Bodies / Re: Sony Sensors Coming to Canon DSLRs? [CR1]
« on: December 15, 2014, 08:21:36 PM »
its about time!

Canon is VERY late bringing that tech to DSLRs, better late than never.

According to the competition, the overall Canon system might be great but the sensors are crap.

I was impressed after playing with a G7X which has a Sony sensor
http://www.dpreview.com/reviews/canon-powershot-g7-x/9

2
Lenses / Re: Review: Sensor Performance of the 7D Mark II
« on: December 01, 2014, 05:24:56 PM »
"perfect levels for the sensor with lower apparent read noise and impressively low pattern noise compared to all other current CANON (and ONLY Canon) cameras"
- FACT

7D2 might be a complete camera with robust body, ergonomics and inherited AF system from 1DX but there is STILL room for even a better sensor

Canon has a loooong long way to go to fix some major problems with bigger steps. Problems such as DR pattern banding when pushing the shadows, where Sony sensors (not cameras) has already fixed that.

so Canon might provide a more complete overall camera and might sell like crazy but that doesn't mean that has the best sensor in the market.

3
Lenses / Re: Sigma or Canon (50mm 1.4)
« on: November 01, 2014, 08:50:36 PM »
Both Sigmas (art or non-art) are huge
the Canon is small and easy to carry.
The non-art sigma suffers with CA. The canon too.

If you hunt the best glass quality among the three, the sigma art is the champion.
2nd place the sigma non-art
and 3th the canon.

However i own the canon 1.4 and yes its fragile, but i love the size of it.

4
Lenses / Re: why there are no new L primes
« on: October 24, 2014, 08:49:50 AM »
So canon sacrifice the sharpness over the creamy bokeh of 1.2 glasses.

However i would compromise with newer 1.4 glasses stabilized or not doesn't make any difference to a wedding photographer as i am.

All i need is to suck the available amount of natural light without any use of flash. The new 2.8 zoom lenses are great at 2.8, sharp, creamy, with fast focusing. However a couple of ISO stops less would be nice, plus the great DOF that 1.4 gives compared with 2.8

However i think there is a great dilema for Canon if new 1.4 glasses are out, who is gonna buy the 1.2? except those who doesn't compromise with the bokeh of 1.2 glass?

However the EF 50 1.4 and the 85 1.8 are horrible wide open in cameras with high megapixels. They just can't handle it, plus the CA in the bokeh which is terrible and unfixable in post process

5
Lenses / why there are no new L primes
« on: October 24, 2014, 05:01:54 AM »
Hi
i'm considering to buy some new fast prime lenses for my 5D III

However Canon has left behind their L primes update, since there is no new 35L 50L 85L 135L replacements, and the 24L II isn't quite the sharpest lens wide open.

It seems Canon drop the weight on 24-70 2.8 II and 70-200 2.8 IS II where these two are far the best zoom lenses i've ever used. I trust them completely at 2.8 and i get nailed focus pictures without selling me, where as a professional that means everything.

However the need for faster glass is imminent

These sigmas ART 35 and 50 seems promising.
After testing the 35A the only thing that stops me is the focus accuracy. (actually it was good in this 35A but i had bad experiences with sigma before)

However Sigma glass is perfect. no CA (damn these EF 50 1.4 and EF 85 1.8 are killing me) , sharp wide open, what else to ask for?

I haven't tested the 50A yet but i know it will be top notch like the 35A i've tested

Meanwhile after seeing this

http://www.the-digital-picture.com/Reviews/ISO-12233-Sample-Crops.aspx?Lens=403&Camera=453&Sample=0&FLI=0&API=1&LensComp=941&CameraComp=453&SampleComp=0&FLIComp=0&APIComp=0

I was wondering why should somebody buy the 50L today.
Not a wise choice in terms of quality and price.

Anyway, is there any word out about new L primes?
maybe next year? or should i move along buying the 35A and 50A since the current 35L and 50L is out of the question since they are quite expensive and old.

6
EOS Bodies - For Stills / Re: So what makes a camera a "pro" camera?
« on: October 15, 2014, 09:05:25 PM »
"So what makes a camera a "pro" camera?"

Selecting the right tool for the job and NOT just the photographer behind it.

EX. even the most skillful photographer won't deliver soft wedding pictures with shalow DOF taken with an i-phone or a compact camera.

As it comes to hardware, the better helps most, but its not always needed.

Sure its best if you have the cleanest FF sensor and fast and sharp lenses to shoot in low light conditions costing a 5 digit price range

But it doesn't mean that you can't do eg, landscape with an entry level camera with a 3 digit price range.

So i disagree. The photographer only is NOT good enough without the appropriate hardware for each job, and its always BEST to demand from companies to upgrade the hardware and not being afraid and safe by telling that the photographer is a god with a magic wand that can capture everything.

7
EOS Bodies / Re: \
« on: October 13, 2014, 06:14:09 PM »
This is why i love Canon
- color
- lenses
- DPAF

However the 80D with touch and flip screen plus the 60fps will be an ideal piece of hardware for video makers.
Its clear that 7D 2 aims most to photographers who need high speed burst and telephoto lenses x 1.6

Great video though

8
in terms of dynamic range this is interesting too

http://www.rossharvey.com/reviews/nikon-d750-review

my wish? May Canon use Sony sensors in the next models

9
Lenses / Re: Is This a Canon EF 11-24 f/4L?
« on: September 17, 2014, 06:08:57 PM »
if its true, why it ain't in photokina?

Wish it is though, and if it is, it ain't gonna be cheap :(

10
Lenses / Re: EF11-24mm F4L listed on a Japanese site
« on: September 16, 2014, 03:27:19 PM »
I just wish its real

Canon lacks that mm range
11mm 12mm 13mm nope

Just EF 14mm, 15mm fisheye and 16-35mm

11
EOS Bodies / Re: How can we improve on 5D3 to 5D4?
« on: September 16, 2014, 11:55:17 AM »
my list:
=====

- better DR or higher resolution (i'd vote better DR though in RAW and NOT JPEG  ::) )

- fast SD slot

- some better ergonomics like assigning autoISO to a button, or even when the SET button when is assigned to adjust the ISO value by holding it and rotate the front dial, in the current condition/firmware it doesn't go to the autoISO, and you have to set it manually each time from the ISO button.

- PLEASE please! assign a button to custom WB, rather than taking an image, set the wb to custom, load the image.. DAMN! one click thats it! RATE and magnify buttons are useless assign one of them at least!
who uses RATE and JPEGs in such a beasty camera anyway..

- Restore magnification buttons in live view like its been in mark II or any other model. (hard to find the magnification button in the night which is in the other side of the camera)

well actually most of my requests can be done with a firmware upgrade :D

in two words?, more button customization
but an upgraded sensor with higher DR is a must for 5D IV

12
EOS Bodies / Re: High ISO Samples from the Canon EOS 7D Mark II
« on: September 16, 2014, 07:43:42 AM »
JPEG from camera with noise reduction filters
downsized to 2 megapixels from 20
and the conclusion is HIGH ISO KING ::)

i doubt if high iso RAW files are gonna be any better than 7D 1

13
EOS-M / Re: Anything new on EOS-M3? How it may compare to A6000?
« on: September 14, 2014, 02:09:20 PM »
definitely fake. :-)

But it shows really well, how freakin' easy it would be to build a worthwhile EOS M3.

@Canon: stick the darn 70D innards except mirror and OVF into an EOS-M2 body, add a great EVF on top, slap on a nice fully articulated LCD to the back and make the handgrip so much larger, that it will fit a regular LP-E6 battery for 500+ shots a charge. Sell @ 699 body only and 799 with kit lens and still make more profit per unit compared to any Rebel and 70D, since it is so much cheaper to build than even an SL-1 mirrorslapper. Significantly less labor cost, since many steps in assembly, calibration and QC are eliminated from the manufacturing process, once the fickle mechanical moving parts and separate phase AF and viewfinder prism are gone.


+1  ;D

14
will canon announce the development of a 1Ds III successor at photokina?
- NO CHANCE IN HELL

will canon rumors announce the development of a 1Ds III successor some time in the future?

Yeah probably for 5 years there will be endless forums topics about HOW we would like 1Ds3 to be, like the 7D mark2 parody  ::)

15
EOS-M / Re: AF speed 40/2.8 vs 85/1.8
« on: September 14, 2014, 01:57:08 PM »
i own both lenses too,

the STM motor is a pain in the ass if you want to focus manually through live view.
the USM feels better and is much more responsive.

As it comes to AF, the USM is faster too.

The STM is smooth and quiet on video mode but NOT faster than USM :(

Pages: [1] 2 3 ... 9