Messages

91

Animal Kingdom / Re: DragonFly Series

« on: August 23, 2012, 09:27:03 PM »

1D X, 500mm f4 L IS and 25mm extension tube:

92

EOS Bodies - For Stills / Re: 1D X won't wake from sleep

« on: August 23, 2012, 05:39:04 PM »

The 1Dx fell into a coma.

No. I think it would be better classified as narcolepsy.

93

EOS Bodies - For Stills / Re: 1D X won't wake from sleep

« on: August 22, 2012, 10:19:59 PM »

This is from my last E-mail correspondance with Canon today:

"We appreciate your continued correspondence regarding your EOS-1D X, Extender EF 1.4x III and EF 180mm f/3.5L Macro USM lens.

Thank you very much for the very detailed information.  This is extremely helpful to us.  I have forwarded this information along to the appropriate party to have this looked into.  Again, thank you for taking the time to conduct these detailed tests.

Please let us know if we can be of any further assistance with your EOS-1D X, Extender EF 1.4x III and EF 180mm f/3.5L Macro USM lens. Thank you for choosing Canon."

So, it does appear they are listening. Let's see what transpires.

94

EOS Bodies - For Stills / Re: 1D X won't wake from sleep

« on: August 21, 2012, 10:05:50 PM »

You know I don't really disagree with any of the responses to this post. My only intent of the post was to find out if anyone else was seeing the sleep issue I've seen. If enough people were seeing it we could then make it known to Canon and ask for a fix.

95

Canon General / Re: Canon in San Jose?

« on: August 21, 2012, 07:00:07 PM »

Isn't that the facility that deals with their line of electric motors? I think I talked to one of the reps from that office years ago when I was working in the Bay Area.

96

EOS Bodies - For Stills / Re: 1D X won't wake from sleep

« on: August 21, 2012, 12:15:53 PM »

So, it appears the end user has been delegated as the final tester of the product......

97

EOS Bodies - For Stills / Re: 1D X won't wake from sleep

« on: August 21, 2012, 09:07:07 AM »

I have only an older Mark II 2x extender, which I sometimes use with my 180mm. I have not had any problems with that combination on my 1DX. I can't say, if there is any difference in the Mark III extenders that may not be perfectly matched to such an old lens design as the 180mm. I am not sure, but since you have found no issues combining the new extender with newer lenses or combining an older extender with the same lens and body there may be an issue here with gear not being as optimized for each other as you would wish for.

I don't think it's a wish at all. I think it's an expectation when you are dealing with Canon's "Flagship" camera. If two of their lower tier cameras can work properly and as expected why can't their top tier camera do the same? Clearly Canon hasn't thouroughly tested the 1D X and some things have slipped through the cracks.

98

EOS Bodies - For Stills / Re: 1D X won't wake from sleep

« on: August 20, 2012, 01:57:24 PM »

Some more to add to the saga. I played around with the 1D X and reset everything to the factory defaults with no effect on the sleep issue. I have found removing the battery briefly will also reset the camera. And, I just got back from another friends house where we tried her Extender EF 2x III and it displays the same problem of the camera not coming out of sleep. The 2x III and my 180 Macro on her 7D and the operation was normal. It appears to me that the culprit is the 1D X and that it doesn't play well with the Series III extenders and the 180 Macro.

99

EOS Bodies - For Stills / Re: 1D X won't wake from sleep

« on: August 20, 2012, 09:15:42 AM »

No, I wasn't clear on that. The only variable was the use of her Extender. Otherwise it was my 1D x and 180 Macro. We also tried her II series 2x Extender and it worked normally as expected since the II series does not have the "chip" in it.

Yes, I was hoping to get someone else to verify what I am seeing. I can't be the only one in the world who has this combination of camera, lens and Extender.

100

EOS Bodies - For Stills / Re: 1D X won't wake from sleep

« on: August 19, 2012, 05:36:02 PM »

Some more observations: If the camera "locks up" and won't come out of sleep removing the battery briefly will reset it. And, I just returned from my friends house where I tried her Extender 1.4x III (same as mine) with the 180 Macro and the results were exactly the same. I also tried the 8 lenses I own, 3 of which will take an Extender and still the not waking only happens with the 180 Macro and the 1.4x III Extender combination.

I also just received an E-mail from Canon saying they had never seen this problem and to send the camera, lens and Extender to them. They did not offer to pay for the shipping and insurance. If they have never seen the problem then how can they fix it? I "firmly" believe it is a firmware problem and I am not willing to be a Guinea Pig and have them sit on my equipment until Canon Japan comes out with updated firmware. In the meantime I have 2 workarounds: Change the Power Off settings or use the 180 Macro and Extender on my 5D Mark III where I should probably be using it anyway.

101

EOS Bodies - For Stills / Re: 1D X won't wake from sleep

« on: August 19, 2012, 01:15:12 PM »

Yes, of course.

If you tell me how long you have the shut off set for I'll try it on mine!

Also note if the power switch was turned to On or Lock, before power off.  It shouldn't matter, if you're using the shutter button to wake up the camera, but if it's a bug then we need to check both.

I wonder if it's related to the AFMA bug?  Do you have AFMA in conjunction with AF points linked to orientation?

Rich

I had it set to both 1 and 2 minutes and the power switch to ON. AFMA wasn't set for that lens when I discovered the problem. I have since set the AFMA as an "experiment" and have seen no difference. Also the Orientation Linked AF Point is set to Same for Both.

102

EOS Bodies - For Stills / Re: 1D X won't wake from sleep

« on: August 19, 2012, 12:22:57 PM »

How long do you guys have the Auto Power Off set for?  Why don't you just set the timer longer for now.

I have all of my cameras set for 15 minutes, so I haven't noticed any problems.  The batteries last very long regardless.

However, I agree it should wake up with the shutter press.

Rich

Yes that is the obvious workaround. Set the Auto Power Off to a longer time or completely disable it at least with that lens Extender combination.

When I get a chance I am going to borrow my friends Extenders (1.4 and 2x) and see if the problem still persists.

103

EOS Bodies - For Stills / Re: 1D X won't wake from sleep

« on: August 18, 2012, 07:21:44 PM »

Yes, if someone else can confirm that the problem is consistent with my what I am seeing. Canon seems to be unaware at this point.

104

EOS Bodies - For Stills / 1D X won't wake from sleep

« on: August 18, 2012, 12:51:28 PM »

I've been a long time watcher of the canonrumors and forum websites. My first post here.

I'm trying to narrow down a problem I am having with my 1D X and EF 180 f3.5 L Macro being used with the EF 1.4x III Extender. If the camera goes into sleep mode it won't wake up by pushing the shutter button. Turning the power switch OFF and back to ON the camera is unresponsive (it won't turn back ON). Removing the lens and Extender from the camera and reattaching them, the camera comes back to normal operation. Also removing the lens from the Extender (leaving the Extender on the camera) operation comes back. (Edit: Turning the camera OFF and back ON before it goes into sleep also results in normal operation.) With the Macro lens alone operation is normal.

I have tried this combination of lens and Extender on my 7D and 5D Mark III and it works perfectly. Using the Extender with my EF 500mm f4 L IS and EF 70-200 f2.8 L II IS on the 1D X, again operation is normal.

Does anyone have this combination of lens, camera and Extender who could duplicate what I am seeing?

I have contacted Canon through E-mails and they don't have a resolution for me yet.

Thanks in advance for any help you may have to offer.