|
When you purchase through links on our site, we may earn an affiliate commission. Here's how it works. |
B&H Photo has the Benro CLT204 2-Series Induro Classic Carbon Fiber Tripod in their DealZone for only $169 (Reg $419). This is a one day savings of $250 for a very good tripod from a known brand.
Benro CLT204 2-Series Induro Overview
The CLT204 Induro Classic Carbon Fiber Tripod, 2-Series Legs from Benrto provides maximum stability in a compact, unique design, suitable for the evolving image maker. The 61.4″ tall tripod features a unique carbon fiber weave that maximizes the strength-to-weight ratio and has a load capacity of 35.3 lb, while keeping the weight down to 3.6 lb.
The magnesium spider features V-pattern cross-braces for extra rigidity and the sturdiness needed for long-lens photography.
The ergonomic, rubber-covered twist-lock joints are dust-resistant and oversized, so they easily fit the hand, even while wearing gloves when the cold weather hits. Engineered for stability at any angle, the three-stop adjustable leg locks and independent leg spread provide lower angles and maximum stability. The adjustable legs and bubble level allow easy and accurate leveling on uneven terrain.
The oversized center column lock makes it easy to secure the short, grooved column in any vertical position and even allows the camera to be positioned as close to the ground as possible. Additionally, this 2-Series leg set folds down to an impressively compact 21.3″ for easy transport and storage.
- Lightweight, short-column design
- Oversized center column locking collar
- Magnesium AZ91D cast alloy spider
- Interchangeable rubber feet and stainless-steel spikes
- Built-in bubble level
- Independent leg spread
- Three padded leg sleeves
- Attached ballast hook
- Three-position leg angle locks
- Short center column
- Ergonomic leg lock grips
- Dust and moisture-resistant leg locks
- Top plate diameter: 56mm
Benro CLT204 Specs
Key Specs
| Head Mount Type | 3/8″-16 Male |
| Primary Material | Carbon Fiber |
| Load Capacity | 35.3 lb / 16 kg |
| Maximum Working Height | 61.4″ / 155.96 cm |
| Max Height without Center Column | 53.1″ / 135 cm |
| Minimum Working Height | 12.6″ / 32 cm |
| Closed Length | 21.3″ / 54 cm |
| Weight | 3.57 lb / 1.62 kg |
Legs
| Head Mount Type | 3/8″-16 Male |
| Primary Material | Carbon Fiber |
| Leg Lock | Twist Lock |
| Leg Sections | 4 |
| Independent Leg Spread | Yes |
| Leg Positions | 3 Positions |
| Foot Features | Spiked, Removable |
General
| Load Capacity | 35.3 lb / 16 kg |
| Maximum Working Height | 61.4″ / 155.96 cm |
| Center Column | Yes (Round): Ballast Hook, Removable, Reversible |
| Max Height without Center Column | 53.1″ / 135 cm |
| Minimum Working Height | 12.6″ / 32 cm |
| Closed Length | 21.3″ / 54 cm |
| Accessory Mounting | 1x 3/8″-16 Female Thread |
| Bubble Level | Yes |
| Detachable Monopod | No |
| Weight | 3.57 lb / 1.62 kg |
Packaging Info
| Package Weight | 5.955 lb |
| Box Dimensions (LxWxH) | 28.5 x 5 x 4.9″ |
