EOS 60D firmware update

[MY_EOS_60D]

From Canon:

Canon has released a firmware update for the EOS 60D Digital SLR camera.
Affected Product: EOS 60D Digital SLR
Firmware

Firmware Version 1.1.0 incorporates the following fixes and improvements.

1. Fixes a phenomenon where the wireless built-in flash settings are reset to defaults when the battery is removed from the camera.

2. Fixes an intermittent phenomenon where image-rotation information is not recognized correctly when shooting with the camera in the vertical position depending on the timing of the shutter release.

Firmware Version 1.1.0 is for cameras with firmware up to Version 1.0.9. If the camera's firmware is already Version 1.1.0, it is not necessary to update the firmware.

Download: http://usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_60d#DriversAndSoftware

 

[bvukich]

Thanks for the heads up.

I've run into the problem resolved by change 2. I shoot a lot of vertical, and 1 shot in maybe 500 will have an orientation 180deg off (i.e., upside down).

Actually now that I think about it, I think I've run into the problem described in change 1 as well. I've had the wireless master settings mysteriously reset themselves