remote tigger 600EX-RT

  • Thread starter Thread starter mbworldz
  • Start date Start date
Status
Not open for further replies.
M

mbworldz

Guest
I am about to order the 600EX-RT, in order to remote trigger the flash remotely, do I need to have ST-E3 ?
Can I use those FlexTT5 or MiniTT1 by pocket wizard mount on the camera hot shoe?
 
PW doesn't support the 600EX-RT yet, though they will at some point. So right now, the ST-E3 or another 600EX-RT are your best bets. Not sure about other 3rd party wireless triggers.
 
Upvote 0
I just got a Cowboy Studios remote trigger that works beautifully for $21

http://www.amazon.com/gp/product/B002X7FSO6/ref=oh_details_o02_s00_i00

I have three 600-RTs and the ST-E3-RT on order, but I decided that using one of them to trigger is a waste. Plus with a pre-2012 body you need a cable from the flash to the three wire socket on the camera (forget what that one is called). The trigger is small so doesn't take up much space and it acts and feels like the regular switch.
 
Upvote 0
What about the Phottix Strato II Wireless Remote Speedlite Trigger eTTL ?
They said it works with TTL?
http://www.ebay.com/itm/Phottix-Strato-II-Wireless-Remote-Speedlite-Trigger-eTTL-Canon-5DMKIII-5dMK3-1Dx-/270974643001?pt=Camera_Camcorder_Remotes&hash=item3f1758eb39



Fatalv said:
mbworldz said:
Does the Yongnuo RF-603 has TTL? If not, should I get one of those Sekonic L-358 Flash Master?

or If I get two 600EX-RT, can it trigger remotely to each other ?

The Yongnuo only works in manual mode.
 
Upvote 0
RC said:
Daniel Flather said:
I have two 600rt units and the st-e3-rt, expensive set up, but it's slick!

You going to get any 440-RTs when they come out?

No, but I might pick up another 600. I had two 430s that I sold with my 580 and 50/1.4 to help cover the two 600s and st-e3-rt. The 430s were great, but the lower power and lower re-sale value have sealed the deal of, go big or go home.
 
Upvote 0
Daniel Flather said:
RC said:
Daniel Flather said:
I have two 600rt units and the st-e3-rt, expensive set up, but it's slick!

You going to get any 440-RTs when they come out?

No, but I might pick up another 600. I had two 430s that I sold with my 580 and 50/1.4 to help cover the two 600s and st-e3-rt. The 430s were great, but the lower power and lower re-sale value have sealed the deal of, go big or go home.

Reason I asked was I have a 600-RT, an ST-E3-RT on pre-order and I was planning to get a couple of 440s when the the time comes. Basically replacing what I had (1 580 II and 2 430 IIs). Was curious if and why you were going with 600s over 440s and see have answered that.
 
Upvote 0
RC said:
Daniel Flather said:
RC said:
Daniel Flather said:
I have two 600rt units and the st-e3-rt, expensive set up, but it's slick!

You going to get any 440-RTs when they come out?

No, but I might pick up another 600. I had two 430s that I sold with my 580 and 50/1.4 to help cover the two 600s and st-e3-rt. The 430s were great, but the lower power and lower re-sale value have sealed the deal of, go big or go home.

Reason I asked was I have a 600-RT, an ST-E3-RT on pre-order and I was planning to get a couple of 440s when the the time comes. Basically replacing what I had (1 580 II and 2 430 IIs). Was curious if and why you were going with 600s over 440s and see have answered that.

It seemed silly before to have the bigger flash 580 as the trigger and the little 430s doing all the work. I think the new set- up makes more sense, albeit more costly.
 
Upvote 0
Status
Not open for further replies.