Canon has updated the firmware on the Cinema EOS C300 Mark II camera.

Firmware Version incorporates the following fixes and enhancements:

  1. Fixes a phenomenon in which, depending on usage conditions, the camera freezes when a VPG130 CFast card is used simultaneously with a non VPG130 CFast card. *1
  2. Adds a [-1] *3 option to the [Noise Reduction] setting under Custom Picture Settings to completely cancel the effects of noise reduction. *2
  3. Fixes the panel light control mechanism of the viewfinder.

*1 This applies to cameras equipped with Firmware Version

*2 This applies to cameras equipped with Firmware Version –

*3 On cameras equipped with Firmware Version or later, even if the [Noise Reduction] setting is set to [Off], a small amount of noise reduction is still applied. If the [-1] setting is selected, no noise reduction is applied, so the amount of noise will increase compared to when the [Off] setting is selected. Furthermore, when displaying the metadata of clips captured with the [-1] setting using Canon XF Utility Ver. 2.1 – 3.2, the [Noise Reduction] setting will be displayed as blank.

Download firmware from Canon USA


Some of our articles may include affiliate links. If you purchase through these links, we may earn an affiliate commission at no extra cost to you.

Comments are closed.