HTML:
Canon has released a firmware update for the Cinama EOS C200 camera.</p>
<p><strong>Firmware Version 1.0.2.1.00 incorporates the following enhancements:</strong></p>
<p>When CN-E70-200mm T4.4 L IS KAS S is attached the following features are enabled:</p>
<ul>
<li>Autofocus using the Dual Pixel CMOS AF function</li>
<li>Dual Pixel Focus Guide function.</li>
<li>The joystick on the camera’s grip unit can be set to operate the zoom.</li>
<li>Manual control of the iris with Camera’s Control dial.</li>
<li>Control of focus, zoom and iris using the separately-sold Remote Controller RC-V100.</li>
<li>Automatic aperture and push auto iris functions.</li>
<li>Start/stop recording on the separately-sold lens grip ZSG-C10.</li>
<li>Retrieval of Lens metadata, such as the model name and the focal distance will display on the camera.</li>
<li>Peripheral illumination / chromatic aberration correction.</li>
</ul>
<p><!--more--></p>
<p><strong>Caution:</strong></p>
<ul>
<li>You cannot perform the firmware update using CFast 2.0 cards. Please use a commercially available SD/SDHC/SDXC memory card that is 128MB or more for the firmware update.</li>
<li>Firmware version 1.0.2.1.00 is for updating Cinema EOS C200 cameras running firmware version 1.0.0.1.00 – 1.0.1.1.00. If your camera’s firmware is already version 1.0.2.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.</li>
<li>For further information, please refer to the latest version of the unit’s Instruction Manual that is released with the firmware update.</li>
</ul>
<p><strong>The following things are required to perform this firmware update:</strong></p>
<ol>
<li>An EOS C200 or EOS C200B camera body</li>
<li>A computer (OS Requirements: Mac OS 10.7 – 10.13)</li>
<li>A 128 MB or higher-capacity SD/SDHC/SDXC memory card (both commercially available)</li>
<li>An SD card reader/writer (commercially available) or an SD card slot built into the computer</li>
<li>A fully charged battery pack for the camera</li>
<li>Compact power adapter bundled with the camera</li>
<li>The firmware (the downloaded file)</li>
</ol>
<span id="pty_trigger"></span>
