HTML:
Canon has updated the firmware on the Cinema EOS C300 Mark II camera.</p>
<p><strong>Firmware Version 1.0.7.1.00 incorporates the following fixes and enhancements:</strong></p>
<ol>
<li>Fixes a phenomenon in which, depending on usage conditions, the camera freezes when a VPG130 CFast card is used simultaneously with a non VPG130 CFast card. *1</li>
<li>Adds a [-1] *3 option to the [Noise Reduction] setting under Custom Picture Settings to completely cancel the effects of noise reduction. *2</li>
<li>Fixes the panel light control mechanism of the viewfinder.</li>
</ol>
<p>*1 This applies to cameras equipped with Firmware Version 1.0.6.1.00</p>
<p>*2 This applies to cameras equipped with Firmware Version 1.0.4.1.00 – 1.0.6.1.00.</p>
<p>*3 On cameras equipped with Firmware Version 1.0.4.1.00 or later, even if the [Noise Reduction] setting is set to [Off], a small amount of noise reduction is still applied. If the [-1] setting is selected, no noise reduction is applied, so the amount of noise will increase compared to when the [Off] setting is selected. Furthermore, when displaying the metadata of clips captured with the [-1] setting using Canon XF Utility Ver. 2.1 – 3.2, the [Noise Reduction] setting will be displayed as blank.</p>
<p><strong><a href="https://www.usa.canon.com/internet/portal/us/home/support/details/cameras/cinema-eos/eos-c300-mark-ii?subtab=downloads-firmware">Download firmware 1.0.7.1.00 from Canon USA</a></strong></p>
<p> </p>
<span id="pty_trigger"></span>