Close Menu

    Canon EOS R5 v1.7.0 update released

    By Updated:43 Comments1 Min Read Canon EOS R
    eosr5w24105l - Canon EOS R5 v1.7.0 update released

    Canon has released a minor firmware update for the Canon EOS R5.

    This firmware includes the following fixes.

    1. Corrected the phenomenon that, on rare occasions, the camera would not operate normally while shooting a small subject.
    2. Fixed minor bugs.

    Download firmware v1.7.0 for the Canon EOS R5

    Some of our articles may include affiliate links. If you purchase through these links, we may earn an affiliate commission at no extra cost to you.

    Go to discussion...

    Share.

    Related Posts

    43 comments

    5. Notice any improvement in AF? Did you notice anything at all?
      I didn't test small subjects, but taking a few indoor test shots didn't seem any different than before the upgrade.
    7. Same for me. Tested on a small subject (stuffed animal) where the AF wasn't able to pick the eye. No difference between 1.6 and 1.7
      I've noticed with my 50 and 85 1.2's sometimes get some hunting on small objects with more defined objects behind them. It would take me focusing closer and then back at that object to try to snag it. Hopefully this fixes that but I'll test after work today.
    8. I've noticed with my 50 and 85 1.2's sometimes get some hunting on small objects with more defined objects behind them. It would take me focusing closer and then back at that object to try to snag it. Hopefully this fixes that but I'll test after work today.
      Yeah, this update could help with wildlife subjects, such as small birds in front of busy backgrounds. Have to test it out.
    9. Yeah, this update could help with wildlife subjects, such as small birds in front of busy backgrounds. Have to test it out.
      I just did a quick test shot at dusk with 1.70. Don't take the quality of this seriously as it was at iso 10k and 1/100s at 500mm and a distance of 14m, conditions where it won't be sharp. But, you can see the AF set to eyeAF and full screen tracking just locked on to a tiny bird, mainly horizontal and not much contrast with the background. I don't seem to have AF problems that others report. Here is the full frame, reduced to fit, and a 100% crop around the Longtailed Tit.309A6551-DxO_longtailed_tit_iso10k_100th_full.jpeg309A6551-DxO_longtailed_tit_iso10k_100th_crop.jpg
    10. I just did a quick test shot at dusk with 1.70. Don't take the quality of this seriously as it was at iso 10k and 1/100s at 500mm and a distance of 14m, conditions where it won't be sharp. But, you can see the AF set to eyeAF and full screen tracking just locked on to a tiny bird, mainly horizontal and not much contrast with the background. I don't seem to have AF problems that others report. Here is the full frame, reduced to fit, and a 100% crop around the Longtailed Tit.View attachment 206661View attachment 206662
      it looks perfect.
    12. Yeah i think it'd be an easy update, having tracking in all modes. I used to do that with Sony... Use the smaller boxes to tag and object and enable tracking looking through my evf vs being in wide and having to touch the screen
    14. I wouldn't expect any further feature updates now the the R5 II is not too far off.
      I think the R5 is a key model and it's only at 1.7.0... look what they did with the c300 and others, so I think we'd get incremental features but nothing too crazy.
    15. Apart from the freezing, for which fortunately I was in the group that didn't have this problem, Canon came out with R5 firmware that was adequte but lacked some niggling features like not being able to change fps for ES shutter and further refinements as found in the R3 and R7. Nikon, on the other hand with the Z9, came out with rather underdeveloped firmware which wasn't up to it and with the promise that they would develop it, which they have done.
    16. I still hope we get it as the R3 also didn't get the AF update yet as far as I can tell
      The r3 does not have the same issues that the R5 has, so why do you want a firmware update that goes with another model camera?
    17. The r3 does not have the same issues that the R5 has, so why do you want a firmware update that goes with another model camera?
      What I was trying to say was that also the R3 did not yet get the new machine learning update for new objects like for example the R6II which I am quite sure it will get.

    Leave a comment

    Please log in to your forum account to comment