jrista said:AlanF said:Another test that is useful from TDP is the comparison of sharpness using the 200mm/2 L. The Mark II seems to my eyes to be an improvement over the 7D:
http://www.the-digital-picture.com/Reviews/ISO-12233-Sample-Crops.aspx?Lens=458&Camera=963&FLI=0&API=0&LensComp=458&Sample=0&CameraComp=673&FLIComp=0&APIComp=0
Although the 5D III still has a real edge, which is why the "extra reach" of the crop is not a factor of 1.6 because its image is more blurred.
http://www.the-digital-picture.com/Reviews/ISO-12233-Sample-Crops.aspx?Lens=458&Camera=963&FLI=0&API=0&LensComp=458&Sample=0&CameraComp=792&FLIComp=0&APIComp=0
Hate to say it, but your assessment here is a little flawed. The 5D III does have the edge, however that is because it is a comparison of identical framing. Whenever framing is identical, more sensor area with similar pixel counts is always going to win. These tests are NOT tests of reach.
The 7D II appears softer (at f/2) than the 5D III only because the 5D III chart images were not taken at the same distance. If you DID change the framing with the 5D III, such that the chart was at the same exact distance from the sensor as it is with the 7D II...then the "softness" of the crop would at least be on par with the 5D III.
Furthermore, the softness is due to optical aberrations. For an adequate comparison of resolving power, you need to be more diffraction limited. If both cameras were tested at say f/4 at the same distance (which means different framing in the 5D III), the reach advantage of the 7D II should become much clearer.
In addition, Bryan Carnathan is fond of JPG straight off the camera in these comparisons, thus rendering them a less-than-perfect comparison. As we all know, JPG processing, picture styles, etc. vary from camera to camera. So I generally don't use his site's great comparison tool to rate camera bodies -- I use it for lenses, particularly sharpness vs. aperture.
- A
Upvote
0