Canon EOS 7D Firmware Version 2 Coming Soon

[darrellrhodesmiller]

5 or 7 AEB bracketing would sure be nice.. considering what else they are doing it should be a simple addition. i hope they dont leave that only to the 5dmkIII and above

 

[DB]

Obviously means no 7DII coming soon.

SUPER happy with new firmware =D

Or it means that the 7DII is going to be way more expensive ($2500) and they are going to keep the 7D in the product line.

+1 They are going to introduce a 7D2, probably about a grand below the 5D3 in price -> could also suggest that it may be APS-H with new 61-point AF as well as 1DX and 5D3, but still a crop sensor.

And like the retention of the 5D2, Canon will likely keep the 7D mk I as an entry-level sports/wildlife camera. In fact, if a new 7D2 had a 24MP APS-H with massively improved AF, a lot of current 7D owners wold buy the new model whilst simultaneously keeping their old 7D as both a backup + alternative crop (slightly longer reach) camera body.

Clearly Canon is looking to extend it's product line further, while introducing new higher priced models.

 

[Arkarch]

5 or 7 AEB bracketing would sure be nice.. considering what else they are doing it should be a simple addition. i hope they dont leave that only to the 5dmkIII and above

Amen. 5 and 7 AEB is one of the most useable day-to-day improvements I have enjoyed with the 5D Mark III. With the 7D, I need to take 3, then go into menu, shift it all, and take 3 more. With the 5D Mark III, I can lay a -1 to +1 range on thirds. Should not require any technology changes - just firmware.

 

[Loswr]

They are going to introduce a 7D2...could also suggest that it may be APS-H...

Reaching out a hand to shake your shoulder and wake you up from the dream... :

 

[aznable]

AUTO ISO MAXIMUM SETTING Within the EOS 7D’s shooting menu photographers will have the ability to set a maximum ISO speed for ISO Auto, within the ISO range of 400-6400, so that you can minimise the amount of noise in your images.

It's as if my prayers have been answered...

it seems canon listen their customers...the next sensors will have an unbelievable DR and resolution

 

[LetTheRightLensIn]

"IMPROVED RAW MAXIMUM BURST In the EOS 7D the maximum burst of RAW file frames was 15 – with the firmware update this will be significantly increased so that the camera’s buffer will handle up to 26 RAW frames in a continuous burst."

That's quite an improvement, how are they managing to improve this without increasing the amount of RAM in the buffer? Is it more efficient data transfer protocols, or have they found a way to utilise the improved transfer speeds of the latest generation of CF cards?

Yeah quite surprising. I guess either:
1. they share buffer chips between many models and it's all marketing that decides how much of the buffer RAM can be used and the limit is set in the software buffer allocation and now they are allowing the hardware it had all along to be fully utilized (in which case so much for all the talk about how buffer ram is so expensive and of course only a pro camera can have a lot)

2. the hardware was fast all along but I believe it came out when UDMA 6 was the best and maybe all it takes is some code to let it talk to UDMA 7 now and maybe the hardware interface between 6 and 7 are the same and all you need is software to properly handshake so long as the hardware is fast enough to handle it? I suppose it certainly could be this option. Although I know nothing about UDAM 6 and 7 and for all I know this suggestion is ridiculous

 

[LetTheRightLensIn]

I just hope it means a 5D3 new firmware that has been rumored is coming too.

They so incredibly badly need to:
1. remove the silly 1/250th limit in AutoISO Av and bump it to a good 1/2000th or allow for EC in AutoISO M or both
2. they have GOT to add focus peaking to the video mode!!!!
3. they really should add zebra stripes for blown exposure to the video mode
4. they really need to add a 1920x1080 2x2 sampled 1.6x cropped video mode and it wouldn't hurt to also add an even more extreme mode (although this latter one would need to have some line skipping compromises of course, the 1.6x would not) although the non-line skipped 1.6x needs to be there regardless
5. let the user have the option for a really high bitrate for video for the IPB mode

after the lukewarm reception it got from the video world they need to make it a solid effort

 

[Marsu42]

Doesn't sound too exciting, some stuff that magic lantern can do on non-7d bodies - but the good thing is that Canon is updating firmware, even just too to sell their *** units. There doesn't seem to be support for the new radio flashes though.

AUTO ISO MAXIMUM SETTING Within the EOS 7D’s shooting menu photographers will have the ability to set a maximum ISO speed for ISO Auto, within the ISO range of 400-6400, so that you can minimise the amount of noise in your images.

It's as if my prayers have been answered...

Yes, this is the very one feature my 60D has that I was missing on my 7D - yeah.

The 7d didn't have this - ugh! How did you 7d guys use auto iso in the first place until now?

IMPROVED RAW MAXIMUM BURST

They can enable this with a firmware update??? This is embarrassing, please enable afma on my 60d too if you're fixing things that were crippled to make more expensive bodies more attractive!

 

[nicku]

finally sound control.....

 

[K-amps]

I just hope it means a 5D3 new firmware that has been rumored is coming too.

They so incredibly badly need to:
1. remove the silly 1/250th limit in AutoISO Av and bump it to a good 1/2000th or allow for EC in AutoISO M or both
2. they have GOT to add focus peaking to the video mode!!!!
3. they really should add zebra stripes for blown exposure to the video mode
4. they really need to add a 1920x1080 2x2 sampled 1.6x cropped video mode and it wouldn't hurt to also add an even more extreme mode (although this latter one would need to have some line skipping compromises of course, the 1.6x would not) although the non-line skipped 1.6x needs to be there regardless
5. let the user have the option for a really high bitrate for video for the IPB mode

after the lukewarm reception it got from the video world they need to make it a solid effort

And hopefully the Firmware also comes with a 5D3E conversion kit, containing 2500 grit sandpaper to remove the AA filter

 

[Marsu42]

2. they have GOT to add focus peaking to the video mode!!!!
3. they really should add zebra stripes for blown exposure to the video mode
5. let the user have the option for a really high bitrate for video for the IPB mode

Magic lantern does these on digic4 bodies except the 7d, and probably will do it on the 5d3, too.

 

[K-amps]

2. they have GOT to add focus peaking to the video mode!!!!
3. they really should add zebra stripes for blown exposure to the video mode
5. let the user have the option for a really high bitrate for video for the IPB mode

Magic lantern does these on digic4 bodies except the 7d, and probably will do it on the 5d3, too.

The issue with the 7D was the dual Digic processors, with the 5D3 having a single processor, I have high hopes

 

[darth mollusk]

Amen. 5 and 7 AEB is one of the most useable day-to-day improvements I have enjoyed with the 5D Mark III. With the 7D, I need to take 3, then go into menu, shift it all, and take 3 more. With the 5D Mark III, I can lay a -1 to +1 range on thirds. Should not require any technology changes - just firmware.

This was certainly one of the upgrades I was hoping for as well (why wouldn't canon do this - it must be a fairly straight forward change?). There is a relatively effective go around though: pre-set C2 and C3 to the desired brackets, then it's just one click from C2 after your first three shots, to C3 - not perfect, but better than diving back into the menu.

 

[Marsu42]

The issue with the 7D was the dual Digic processors, with the 5D3 having a single processor, I have high hopes

Then think about sponsoring Alex' ml development if you can afford a 5d3...

This was certainly one of the upgrades I was hoping for as well (why wouldn't canon do this - it must be a fairly straight forward change?).

Even if sounding a bit repetitive ... magic lantern does this, too, it even calculates how many brackets you need on the fly - so shoot 10 or more pictures with 0,5 ev steps for exposure fusion, no problem there.

It is sad that manufacturers have to resort to these firmware annoyances to sell their stuff, but for once Nikon isn't any better - e.g. the d7000 only does max. 2ev 3x bracketing which too little in many situations, too.

 

[LetTheRightLensIn]

2. they have GOT to add focus peaking to the video mode!!!!
3. they really should add zebra stripes for blown exposure to the video mode
5. let the user have the option for a really high bitrate for video for the IPB mode

Magic lantern does these on digic4 bodies except the 7d, and probably will do it on the 5d3, too.

Probably, but it may be a while still and it won't do the cropped video modes I don't think.
Better to just have the camera do it out of the box and not in like 8 months from now.

I should maybe even look to joining in on the work myself, although I really need to get a couple other programs done first, bu tmaybe I can find a little time for some firmware work.

 

[Jason Beiko]

Its nice to see Canon updating firmware, but for me none of the changes are relevant. I would have liked them to change the AEB from three to 5. Without this I see no compelling reason to upgrade.

 

[Arkarch]

This was certainly one of the upgrades I was hoping for as well (why wouldn't canon do this - it must be a fairly straight forward change?).

-----

Even if sounding a bit repetitive ... magic lantern does this, too, it even calculates how many brackets you need on the fly - so shoot 10 or more pictures with 0,5 ev steps for exposure fusion, no problem there.

Yep, but no Magic Lantern for the 7D as noted above. The Dual Digics are the complicating factor.

I suppose that means no Magic Lantern for the 1DX as well - with 2 Digic 5+'s and a Digic 4.

 

[Marsu42]

Yep, but no Magic Lantern for the 7D as noted above. The Dual Digics are the complicating factor.
I suppose that means no Magic Lantern for the 1DX as well - with 2 Digic 5+'s and a Digic 4.

I'm writing this because not everybody reading this thread has to be a current 7d user. As for ml on other bodies, the blocking problem is not that it's impossible, but that no one is actively developing it - ml is basically made by a single person, and he has a sponsored 60d (I contributed, too), a 5d2, maybe now a 5d3. If you want ml on the 7d or 1dx, you simply will have to sponsor (i.e. pay) for it because porting requires more effort than unified ml on digic4 550d->60d->600d->5d2

 

[AlicoatePhotography]

Great!?! ... I just went out and bought a Zoom for audio recording, because the 7D couldn't set the levels. Looks like I didn't need to do that now. I was really hoping for them to unlock the native 1080P where it is effectively zoomed in. One of the other bodies has that, and I think it would be very cool to gain a lot of focal length(not really focal length) for free.

 

[adamfilip]

I love and hate. how canon can simply add features via just a firmware patch..
how they limit the cameras abilities on purpose..

Canon make the camera the best it can be and be only limited by the hardware. not the firmware..
If it could do these things.. and it was basically just locked out.. WTF is with that.. sure id be happy if i was a 7D user and I got new features.. for free.. that would be great. but it should have already been there..