EOS-1D X Firmware Specifcations

[Skulker]

When I saw this thread my first thought was how soon will the first negative comment come. To me it seems some people just moan a lot.

Canon have fixed a problem most of the reaction is negative. : I bet it really annoyed all the negative posters that they missed complaining about this issue.

Btw I can use the red focus points fine as they are.

 

[wickidwombat]

...the 1DX a 7000 bucks camera is the ugly sister...

Sorry to hear that you're dissatisfied with your 1D X. You do have a 1D X, right? :

Personally, I'm quite happy with mine...

LOL
is it me or are you getting MORE sarcastic these days?

 

[Loswr]

:-[

 

[ewg963]

What's the problem with the focus points lighting up red in One Shot?

In One Shot the focus points do not light up red pre or post focus! Only during focusing.

On the 1V/D/S/MKII/MKIIN/MKIII they were on all the time until the 6 second timer ran out. Now they are only on when the shutter button is half pressed then go out after focus is locked!

It is impossible to see a black lcd focus point on a dark subject with a dark background without constantly tapping the shutter button half way to find the focus point in the viewfinder.

The Canon manual says to position the focus point over the subject then half press the shutter button to focus, very hard to do when you can not see the focus point at all!

Thank you my point exactly!!! I shoot in low dingy lights!!!

 

[Loswr]

Ahhh, now I see the issue. Yes, that's true - I suppose it's a result of the transmissive LCD. The older cameras you mention have the AF points etched onto the focus screen - they're always 'on' and because of the etching, when illuminated, the light hits them in such a way that pretty much only the selected AF point lights up. With the transmissive LCD, when it's illuminated the selected AF point(s) are 'lit' but to a lesser extent the whole VF glows red. That is a bit distracting, sort of like wearing rose-colored glasses or suffering from a bad hangover. That glow also mucks with the metering, which is why it turns off after AF lock, and why the AI Servo 'fix' is the illumination blinking on/off rather than steady.

Personally, while the transmissive LCD has some drawbacks, I think those are outweighed by the benefits of AF point display flexibility, on-demand grid display, etc.

 

[mnicol]

Ahhh, now I see the issue. Yes, that's true - I suppose it's a result of the transmissive LCD. The older cameras you mention have the AF points etched onto the focus screen - they're always 'on' and because of the etching, when illuminated, the light hits them in such a way that pretty much only the selected AF point lights up. With the transmissive LCD, when it's illuminated the selected AF point(s) are 'lit' but to a lesser extent the whole VF glows red. That is a bit distracting, sort of like wearing rose-colored glasses or suffering from a bad hangover. That glow also mucks with the metering, which is why it turns off after AF lock, and why the AI Servo 'fix' is the illumination blinking on/off rather than steady.

Personally, while the transmissive LCD has some drawbacks, I think those are outweighed by the benefits of AF point display flexibility, on-demand grid display, etc.

+1

 

[Jan van Holten]

1-1. The function to disable the Image Size selection button is added.

Shit, shit, shit,....... to late.

Shot yesterday some nice aggressive action between two males Snow Bunting, some of them are really nice.
When I loaded the pictures up to the computer I was amazed by the huge numbers that fitted on the card.
Unfortunatly the image size was changed to M1 and even not the highest quality. Result, images not even the size of 3MB.

It was a cold day with a windchill factor of about minus 11 degrees Celsius, so I was wearing big gloves.
I even had a moment in wich I was wondering how many frames I was still be able to make on that card, but it did not trigger me enough to check it out. Stupid mistake.

Jan

 

[ewg963]

Ahhh, now I see the issue. Yes, that's true - I suppose it's a result of the transmissive LCD. The older cameras you mention have the AF points etched onto the focus screen - they're always 'on' and because of the etching, when illuminated, the light hits them in such a way that pretty much only the selected AF point lights up. With the transmissive LCD, when it's illuminated the selected AF point(s) are 'lit' but to a lesser extent the whole VF glows red. That is a bit distracting, sort of like wearing rose-colored glasses or suffering from a bad hangover. That glow also mucks with the metering, which is why it turns off after AF lock, and why the AI Servo 'fix' is the illumination blinking on/off rather than steady.

Personally, while the transmissive LCD has some drawbacks, I think those are outweighed by the benefits of AF point display flexibility, on-demand grid display, etc.

+1