Sigma to Add Second MTF Chart for Lenses

[Canon Rumors]

<div name="googleone_share_1" style="position:relative;z-index:5;float: right; /*margin: 70px 0 0 0;*/ top:70px; right:120px; width:0;"><g:plusone size="tall" count="1" href="http://www.canonrumors.com/?p=15716"></g:plusone></div><div style="float: right; margin:0 0 70px 70px;"><a href="https://twitter.com/share" class="twitter-share-button" data-count="vertical" data-url="http://www.canonrumors.com/?p=15716">Tweet</a></div>
<p><b>Sigma Corporation of America to Release Two MTF Charts for Measurement of Lenses</b></p>
<p>Company releases the data of Geometric and Diffraction MTF charts for Global Vision Lenses</p>
<p>RONKONKOMA, N.Y., — February 3, 2014 – Sigma Corporation of America, a leading researcher, developer, manufacturer and service provider of some of the world’s most impressive lines of lenses, cameras and flashes, today announced that the company will now release a Geometrical MTF (Modulation Transfer Function) chart in addition to a Diffraction MTF chart when measuring the performance of all new Global Vision lenses.</p>
<p>MTF charts are important because they help photographers better understand the optical quality of lenses. Sigma has traditionally released Diffraction MTF data because it takes the diffraction quality of light into consideration, which can dramatically affect the data outcome. Diffracted light exists at every aperture, giving photographers a more accurate measurement of how the lens will perform in real life. Although Geometric MTF data is easier to measure and calculate since it does not consider the diffraction quality of light, it tends to show higher values in the graph and less defined results.</p>
<p>“As a family-owned organization, we hold ourselves and the products we design to a very high standard,” said Mark Amir-Hamzeh, president of Sigma Corporation of America. “Our customer’s expect high quality products and by sharing both MTF charts for all our new lenses, we are able to help guide them in making the most informed purchase decisions based on how our lenses will perform in actual photography situations.”</p>
<p>As a leader in technology and innovation, Sigma Corporation is committed to showing the true value and quality standards of all Sigma Global Vision lenses. Every lens is tested with Sigma’s proprietary modulation transfer function (MTF) “A1” measuring system before being shipped from the factory in Japan. By making both MTF charts available, Sigma is providing its customers with accurate measurements of its lenses and giving photographers a chance to see the full potential of Sigma’s lenses.</p>
<p><strong><span style="color: #ff0000;">c</span>r</strong></p>

 

[Albi86]

So they will provide a real MTF in every lens box?

 

[Sella174]

By making both MTF charts available, Sigma is providing its customers with accurate measurements of its lenses and giving photographers a chance to see the full potential of Sigma’s lenses.

I don't care about MTF charts. If Sigma wants me to consider their lenses, then offer a no-questions-asked 30-day money-back guarantee - world-wide, of course.

 

[Loswr]

So they will provide a real MTF in every lens box?

I wouldn't think so – people would start comparing, trying to get the best one they could, and returning lens after lens to do so. Rather, they test each lens as part of their QC process, and as long as it meets their minimum standard the lens is packed and shipped to be sold.

 

[Albi86]

By making both MTF charts available, Sigma is providing its customers with accurate measurements of its lenses and giving photographers a chance to see the full potential of Sigma’s lenses.

I don't care about MTF charts. If Sigma wants me to consider their lenses, then offer a no-questions-asked 30-day money-back guarantee - world-wide, of course.

Please reconsider the nonsense that you wrote. Sigma is the manufacturer, not the retailer to end users. You don't buy from them, how can they give you money *back* and *worldwide*?

So they will provide a real MTF in every lens box?

I wouldn't think so – people would start comparing, trying to get the best one they could, and returning lens after lens to do so. Rather, they test each lens as part of their QC process, and as long as it meets their minimum standard the lens is packed and shipped to be sold.

I honestly thought of that too. Thing is, then what is the announcement about? What additional MTF are they going to publish?

 

[Loswr]

Thing is, then what is the announcement about? What additional MTF are they going to publish?

They're publishing a geometric MTF in addition to the diffraction MTF that they already publish. The diffraction MTF takes diffraction of light into account, in addition to aberrations. Diffraction limits the maximum resolution of lenses as the aperture gets smaller. A geometric MTF ignores the effect of diffraction - in practice that means the f/8 lines will move up higher on the chart (higher is better).

 

[Sella174]

Please reconsider the nonsense that you wrote. Sigma is the manufacturer, not the retailer to end users. You don't buy from them, how can they give you money *back* and *worldwide*?

Ditto.

Consider what the retailer must do with the returned lenses. Nothing. It's a dead loss.

The only possible solution would be if Sigma supports their retailers and takes back the lenses, refurbishes them, repackages them, gives the retailer credit for the lens, etc. and whatever. This means Sigma takes all the responsibility without placing a strain on the retailer.

Worldwide ... us here in Africa do not have the luxury of "mail-in rebates" from manufacturers, because Canon for one does not support their consumers equally worldwide.

 

[ajfotofilmagem]

By making both MTF charts available, Sigma is providing its customers with accurate measurements of its lenses and giving photographers a chance to see the full potential of Sigma’s lenses.

I don't care about MTF charts. If Sigma wants me to consider their lenses, then offer a no-questions-asked 30-day money-back guarantee - world-wide, of course.

In fact, it would be a demonstration of respect for the consumer if Sigma had authorized service centers in all countries with over 100 million inhabitants. In Brazil we have 200 million inhabitants and no Sigma authorized service. Currently, even the small enterprise Tokina has authorized service center in Brazil, and Sigma has not. Could give even more credibility to Sigma offers a 5 year warranty on all countries, as does the Tamron in the USA. That way I would feel safe in buying Sigma products again.

 

[Loswr]

Thing is, then what is the announcement about? What additional MTF are they going to publish?

They're publishing a geometric MTF in addition to the diffraction MTF that they already publish. The diffraction MTF takes diffraction of light into account, in addition to aberrations. Diffraction limits the maximum resolution of lenses as the aperture gets smaller. A geometric MTF ignores the effect of diffraction - in practice that means the f/8 lines will move up higher on the chart (higher is better).

So which type does Canon publish for their lenses?

Canon's are diffraction MTFs (I'm pretty sure everyone's are, actually, although that may not have been the case before computer-based lens design).

Like most manufacturers, Canon's are theoretical MTFs generated from mathematical modeling of the optical forumla of the lens. Although Sigma apparently empirically measures the MTF of all their production lenses as part of QC, I presume their published MTF curves for each lens are theoretical. Note that Sigma is wrong when they state, "Although Geometric MTF data is easier to measure and calculate…" – easier to calculate, yes, but you can't actually measure a geometical MTF, becuase real light passed through a real lens to measure MTF is subject to diffraction (they're also gramatically incorrect, data are plural ). With modern (even not that modern) computers, a diffraction MTF is easy to calculate once the optical design is known.

AFAIK, only Zeiss publishes empirically measured MTFs of real lenses.

 

[slclick]

I think the question that begs to be asked is "Just how long is that woman going to look through the big lens?"

 

[Rudeofus]

So after all is said and done, this geometric MTF is a completely useless graph, because it shows numbers that can't be achieved if all laws of optics are considered. The biggest benefit from this graph seems to be a cheap marketing ploy aimed at folks who don't know better: "Look at the F/22 numbers, the Sigma lens is so much sharper compared to all others!"

I'm amazed that Sigma has the gall to make a public press announcement about this ...

 

[Loswr]

So after all is said and done, this geometric MTF is a completely useless graph, because it shows numbers that can't be achieved if all laws of optics are considered.

Well, with a lens wide open the effects of diffraction are minimal so performance approaches the geometric model. But then, the algorithms that generate the diffraction MTFs take that into account, and for a wide open lens the two plots would be almost identical. So...you're right, still useless.

 

[slclick]

Why can't I help but think that if Canon made this announcement there would be much celebrating in CR?

 

[Sella174]

Actually, MTBF charts would also be very nice ... especially for Sigma lenses.

 

[Loswr]

Actually, MTBF charts would also be very nice ... especially for Sigma lenses.

Are you referring to:

Major Trouble Backfocuses and Frontfocuses?

Multiple Trips Back to Factory?

Or just the standard Mean Time Between Failures?

 

[ajfotofilmagem]

Actually, MTBF charts would also be very nice ... especially for Sigma lenses.

Are you referring to:
Major Trouble Backfocuses and Frontfocuses?
Multiple Trips Back to Factory?
Or just the standard Mean Time Between Failures?

You forgot to put:
"All of the above."
But it does not seem good for marketing, advertising numbers of faults and focus very common problems with older Sigma lenses.

 

[jrista]

Why can't I help but think that if Canon made this announcement there would be much celebrating in CR?

There wouldn't be. Geometric MTF is kind of a cheat. Besides, Canon lenses are already phenomenal with diffraction MTF. That's one of the biggest reasons Canon fans stick with Canon...their glass is second to none in the majority of cases.

Canon's only real weak spot is the wider angle lenses and wide angle zooms. However, seeing as 2014 is supposed to be the "Year of the Lens", I suspect a lot of those problems will be remedied. The real big one, though, is the 16-35. That lens really needs an upgrade with better corner performance. A 14-24 with Nikon-level MTF would be extremely welcome.

 

[jrista]

Thing is, then what is the announcement about? What additional MTF are they going to publish?

They're publishing a geometric MTF in addition to the diffraction MTF that they already publish. The diffraction MTF takes diffraction of light into account, in addition to aberrations. Diffraction limits the maximum resolution of lenses as the aperture gets smaller. A geometric MTF ignores the effect of diffraction - in practice that means the f/8 lines will move up higher on the chart (higher is better).

So which type does Canon publish for their lenses?

Canon's are diffraction MTFs (I'm pretty sure everyone's are, actually, although that may not have been the case before computer-based lens design).

Like most manufacturers, Canon's are theoretical MTFs generated from mathematical modeling of the optical forumla of the lens. Although Sigma apparently empirically measures the MTF of all their production lenses as part of QC, I presume their published MTF curves for each lens are theoretical. Note that Sigma is wrong when they state, "Although Geometric MTF data is easier to measure and calculate…" – easier to calculate, yes, but you can't actually measure a geometical MTF, becuase real light passed through a real lens to measure MTF is subject to diffraction (they're also gramatically incorrect, data are plural ). With modern (even not that modern) computers, a diffraction MTF is easy to calculate once the optical design is known.

AFAIK, only Zeiss publishes empirically measured MTFs of real lenses.

I'd call model-generated MTFs the "Maximum Potential" of a lens. Your average lens test, as I've mathematically demonstrated so many times before, are sensor-bound, and as see significant increases in resolving power, they see practically no improvement on a standard lens test performed with actual cameras, because the camera's spatial resolution becomes the upper limit. Two lenses may be WORLDS apart in theoretical (maximum potential) MTF, however when tested on a 22.3mp and a 36.3mp sensor, they show only marginal differences.

So there is still a lot of value in having these theoretical MTFs published. They may "only" be generated mathematically based on a computer model of the lens materials and design, but they are certainly more accurate than a standard lens test.

 

[Rudeofus]

Why can't I help but think that if Canon made this announcement there would be much celebrating in CR?

There wouldn't be. Geometric MTF is kind of a cheat.

While I do agree with you on that point, I ran across some very odd blog entry where someone claimed that diffraction blur won't affect final image quality. This blog entry claims that sharpening can be done and would therefore fully justify geometric MTF graphs as highly relevant, but it seems to ignore the increase in noise or other image defects. But maybe this happens only with inferior third party glass, you never know ...

 

[jrista]

Why can't I help but think that if Canon made this announcement there would be much celebrating in CR?

There wouldn't be. Geometric MTF is kind of a cheat.

While I do agree with you on that point, I ran across some very odd blog entry where someone claimed that diffraction blur won't affect final image quality. This blog entry claims that sharpening can be done and would therefore fully justify geometric MTF graphs as highly relevant, but it seems to ignore the increase in noise or other image defects. But maybe this happens only with inferior third party glass, you never know ...

LOL. Sorry, but you entirely misunderstood the point of my blog article, which had to do with the myth of diffraction as it relates to pixel size, a myth that presumes once you stop a lens down to the diffraction limited resolution of the sensor, you suddenly experience worse IQ than a sensor with larger pixels (yes, many photographers actually DO believe that). That's a different issue, though.

As for sharpening, it mitigates the impact of diffraction, it does not eliminate the effects of diffraction entirely, or make lenses behave purely geometrically. Sharpening an f/22 image does not make it diffraction limited f/2 performance. There are also limits as to how far sharpening takes you the farther you stop down...sharpening an f/32 or f/45 or f/64 is certainly not going to reduce the impact of diffraction enough to produce geometric results. It does, however reduce the muddiness of diffraction blurring that affects the f/16+ image to an acceptable level. But that's all post-processing. Lenses behave as lenses behave. Anything you do in post does not actually change the behavior of the lens.