slim filters necessary for wide angle 17-40? and 24-105 lenses?

Status
Not open for further replies.
Hello, I may be obtaining these 2 lenses in the next few weeks and had a question about if I need a slim filter for the 17-40 and/or the 24-105. I prefer B+W filters and have them on most of my lenses. I presume I need the B+W slim UV filter as an everyday protector for the 17-40?
http://www.bhphotovideo.com/c/product/132948-REG/B_W_65_026901_77mm_Ultraviolet_UV_Filter.html

I'd also probably get the slim cpl
http://www.bhphotovideo.com/c/product/133012-REG/B_W_65_016930.html

With the 17-40, would I be able to stack the slim cpl on top of the slim uv filter or would I need to remove the uv filter? just curious.

And is a regular filter on the 24-105 ok? such as this one?
http://www.bhphotovideo.com/c/product/11994-REG/B_W_66_070252_77mm_UV_Haze_010.html

Thanks in advance!
 
I have a regular B&W multicoated UV and it shows no noticable increased vignetting on 17-40/1Ds mark III combo. So you should be perfectly fine. Just take note that if you stack more than one then you will have to get slim filters.
 
Upvote 0
Can't speak to the 17-40mm, but I've tested the 24-105L.



Basically, no extra vignetting with an F-Pro mount, even an F-Pro + XS-Pro is fine (meaning you could stack a slim CPL on an XS-Pro filter). Very slight (<1/3-stop) increase in optical vignetting with 2 F-Pro mounts, and mechanical vignetting with 2 F-Pro + XS-Pro. You may or may not be able to stack a standard CPL on an XS-Pro without mechanical vignetting.

Even on the 16-35/2.8L II, an F-Pro UV is ok.
 
Upvote 0
tome223 said:
Hello, I may be obtaining these 2 lenses in the next few weeks and had a question about if I need a slim filter for the 17-40 and/or the 24-105. I prefer B+W filters and have them on most of my lenses.

Slim if you want to stack.

I'm using Hoya HMC on all mine, standard thickness, even the 16-35II, and no extra darkening at the corners. However, if I stack there is.

Its a judgement call... I don't like to stack filters anyway. Just take one off, put other one on.

If you're using a CP, then you'll need a thin one, as those normally run thicker by design.
 
Upvote 0
Status
Not open for further replies.