Tripod and multiple camera straps

[brett b]

Thank you all very much for your helpful suggestions. It is interesting to learn that many photographers have encountered the same practical issues and that many of you have come up with your own inventive solutions. Looks like there's some room for manufacturers to come up with improved alternatives!

Yes...room for alternatives!
I use a Cotton Carrier for 2 bodies while shooting live stage performances. I like that the bodies don't dangle with this system as I'm running around quite a bit. However, during these shoots, my L brackets are removed from the cameras.
It seems your intent is to have the ability to use 1 tripod and two bodies with different lenses attached. You would clearly need a system that accommodates the use of L brackets.
RRS has a new device that might help...
http://reallyrightstuff.com/ProductDesc.aspx?code=B2-FABN&type=0&eq=

 

[dppaskewitz]

Here is another clamp to use with a BR strap and Arca-swiss plates. I haven't used it, but looks like it would be the quickest transition from hip to tripod:

http://acratech.net/product.php?productid=86&cat=3&page=1

 

[brett b]

Here is another clamp to use with a BR strap and Arca-swiss plates. I haven't used it, but looks like it would be the quickest transition from hip to tripod:

http://acratech.net/product.php?productid=86&cat=3&page=1

I like it, but I would worry that the quick release arm would too easily get caught on something you brush up against, flip open and release the gear attached.

That new RRS clamp seems like it might work for the OP because the clamp attaches to your camera strap then clamps to your L bracket. It looks like you can simply unclamp the strap from the bracket and move directly to tripod.

 

[Loswr]

Here is another clamp to use with a BR strap and Arca-swiss plates. I haven't used it, but looks like it would be the quickest transition from hip to tripod:

http://acratech.net/product.php?productid=86&cat=3&page=1

I've seen that before...seems to me that a lever release clamp on a dangling strap would be the quickest transition from hip to pavement.

 

[dppaskewitz]

I've seen that before...seems to me that a lever release clamp on a dangling strap would be the quickest transition from hip to pavement.

That's what I first thought when I saw it. A demonstration showed that you push a button on the lever to release it (much like a lock-back knife) and that bumping the lever in either direction will not release it.

 

[Loswr]

I've seen that before...seems to me that a lever release clamp on a dangling strap would be the quickest transition from hip to pavement.

That's what I first thought when I saw it. A demonstration showed that you push a button on the lever to release it (much like a lock-back knife) and that bumping the lever in either direction will not release it.

Thanks - that makes a lot more sense!

 

[Halfrack]

Not sure if a belt setup is an option - you let go of the camera, but if you're good with your placement you can feel it slide into the Spider Holster. I hate their plates (hand size when used with the vertical grip) so I use the CarrySpeed F1 folding plate. Only thing it isn't is a L bracket.

Upside is the cameras are lower than when on a strap, walking around is easy. Downside is you can't hike it up high if you're sitting around.

 

[RGF]

I've seen that before...seems to me that a lever release clamp on a dangling strap would be the quickest transition from hip to pavement.

That's what I first thought when I saw it. A demonstration showed that you push a button on the lever to release it (much like a lock-back knife) and that bumping the lever in either direction will not release it.

Thanks - that makes a lot more sense!

looked at it on line and it seems to require a positive action to open the clamp. Neuro - I had the same reaction initially, if the clamp accidentally opened, the camera would hit the ground in under a second

 

[wickidwombat]

A tripod head with quick release plates and just buy two plates, one on each camera?

Suggest an L bracket for each camera - let's you turn the camera vertical without putting weight off to the side of the tripod (ball head). Plus I have plates on all my lenses. To save a few $ is not worth the hassle of moving plates between lens. And the better L brackets (or camera plates) are custom for each body.

As far as BR strap, I trust an anchor point I screw into the plate or body. I am not comfortable with a small clamp (e.g., the Kirk system) which could get loose and have camera crash to the floor. Too bad there is no L bracket with an attachment point that does not interfere with mounting on a ball head.

this is what i do
however i took a dremel to my really right stuff L brackets so that the black rapid FastenR-T1 thats fits inside and flaps down and hides when on a tripod
also a side benefit of it being a dremel hack job is there is quite a bit of metal on metal friction resistance that stops it coming unscrewed. Mine have never even come close to accidentally unscrewing

works really well

 

[expatinasia]

Hi all. I know this sounds odd, but I am frustrated with the time/effort required to swap lenses back and forth from my sling bag to the camera body. As a possible solution, I am thinking about a strap system that permits carrying two bodies with different lenses, e.g., cotton carrier. Unfortunately, I almost always shoot from a tripod.

A tripod would indicate that you are pretty stationary. What are you shooting, if you do not mind me asking?

I am curious because I understand a strap system for hand holding or sports (where a monopod is common) where you have to quickly switch between one body and another, but using a tripod would suggest you are a little more stationary, can you not just carry the second body with lens attached in one of the lowepro bags (or similar) and whip it out when you need? That's what I do when I cover a sports event where I need two bodies, I just leave it on the floor or in the open bag, if I move around one is in the bag, the other around my neck.

 

[lenstrack26]

Hi Expatinasia,
Good question. I'm referring to landscapes in which I'm shooting a lot of bracketed images for HDRs. I feel a tripod is mandatory. (For example a shaded waterfall with a brilliant sky). On a single hike, I can encounter subjects that require a telephoto (100-400 mm), or midrange (24-105 mm) or extreme wide angle (14 mm). I could probably hand-hold these lenses if it were not for the need for bracketing. Even without a tripod, carrying multiple bodies (in a convenient and comfortable and secure system) would make life easier!