• The Canon Rumors Forum has officially been shut down as of July 10, 2026.

    All data will be deleted on September 16, 2026.

    the ad free experience will return by July 17, 2026.

Zoom Lens for a Foreign User

Out of the lenses you mention I would go for the 70-200 f2.8. It is an excellent lens, will provide you with a great range, and it is a staple for portraits shooters. I did have your exact setup, but I upgraded, and now have the 50L, 85L and 135L I still have a 70-200 f4 non-IS. And even though it was my first L lens, I just don't like lugging it around unless I really need it, since I don't do much event photography and have my portrait needs covered, I rarely use it. I actually just got the 85L instead of upgrading it to the 70-200L II. But I do have friend that swear by their 70-200's, they are very, very versatile, and until you find the focal length that you love, it is a great starting point. Good luck!
Upvote 0

Anyone Replacing their Canon 85 1.8 with the Tamron?

I still have the Canon 85/1.8 but mainly use the Tamron 85 VC because of the VC. It's a very fine lens, good at every aperture. I have no AF issues with the Tamron 85 VC. AF is as consistent as any Canon lens that I have.

I have no AF issues with the Sigma 35 or 50 Art lenses. AF is as consistent as any Canon lens that I have.

But ... the Sigma 24 Art is somewhat inconsistent. It seems to have more focus inconsistency than my Canon lenses.

All lenses calibrated with Reikan FoCal.
Upvote 0

Body for Time-lapse photography

A body as cheap as possible. Used. An 1100D (free, practically) + Magilantern = extremely sophisticated 5K timelapse machine.

This way you can get 2-3-4 and get different angles and make the outcome much more dynamic.

7DII is waaaay overkill when a used 1100D/t3i will perfectly do the required job.

And no, don't fear reliability it's as reliable as canon's own firmware.
Upvote 0

Canon Introduces the EOS M5 Digital Camera and its First EF-M High Power Zoom Lens

Versus the Panasonic g80, the EOS M5 has a bigger sensor, 24mp, much higher dynamic range (80d vs gh4), much better lowlight performance, better AF system, usable vs non-usable video AF, headphone jack, and most importantly Full compatibility with Canon glass for use as a 100℅ reliable B-cam for Canon glass,

Of course the g80 has its advantages, mainly high detail video (VERY), zebras and IBIS with manual video lenses, etc.

The M5 is the first Canon MILC that I can make an argument for against another MILC!

A home run only lacking a UHD mode of a very highly detailed HD mods.
Upvote 0

How to Clean Oily Residue (cooking splatter) off lens?

I have 2 small dogs who jump all over me everyday when I come home from work, they regularly smear my specs with their tongues/noses and I always clean my specs by sticking them under the tap, then using some liquid soap to make a lather in my hand then wipe the lenses. Dry off the excess water with tissue then finally wipe with a microfiber towel.
Obviously I'm not suggesting you stick your lens under a tap, but the liquid soap works wonders every time!!
Upvote 0

85mm f1.8 requires A LOT of contrast to focus.

Thanks for the input!

Again, IQ wise I'm happy and not comparing it at all the two others. But basic AF should be better. But if you have ever shot kids, that is the main issue and it sets a much higher demand than anything else. Shooting sports is usually bright colors and contrasts on an even background. But small faces with very little shape and contrast in grey outdoor light is worst case.

Everything but the kids I try to focus on under the same light sticks.

I'll just have to find a way to make it work best.
Upvote 0

Snap, Hashtag and Share Your Slice of Australia

HTML:
Australia is as diverse a country as it is vast. Across its breadth, we enjoy a huge variety of landscapes, city scapes and architecture, cultures and communities, sports and passions that make where we live special.</p>
<p>In the spirit of <em>No One Sees It Like You</em>, Canon wants to help all Australian’s capture and share their local community as they see it – that’s the real Australia.</p>
<p>Launching on 10 October 2016, Snap Australia is a four week program through the network of 108 individual News Community Media and their associated websites and social media channels. Each week, you will have the opportunity to shoot practice briefs in the lead up to the big day on 16 November.</p>
<p>Helping you take photos that show Australia in its best light, the Canon Collective Ambassadors in each state will give you simple tips and inspiration through editorials in your local newspaper and online in short videos.</p>
<p>“Snap Australia is a great opportunity to grab your camera and show your community in its best light to the rest of Australia and the world,” says Steve Loughran, General Manager of the <a href="https://www.canon.com.au/en-AU/Personal/imageSpectrum/Community/collective-home" target="_blank">Canon Collective</a>. “We’re looking forward to helping people with simple pointers to take shots that bring out the stories, characters, beauty and passions that make up a community. And because everyone sees things differently, we’ll see loads of unique perspectives come through which is really exciting.” Keep an eye out for us in your <a href="http://www.newscorpaustralia.com/local" target="_blank">News Community Media</a> newspaper – online or in print – and to get involved just visit <a href="http://www.snapaustralia.com.au/" target="_blank">snapaustralia.com.au</a>.</p>
<p><strong>Where is Snap Australia taking place?</strong></p>
<p>The Snap Australia program is a News Community Media program comprising the five community publishing divisions in Sydney/Central Coast, Brisbane, Melbourne, Adelaide and Perth.</p>
<p><strong>How do I get involved?</strong></p>
<p>Keep an eye out for the weekly brief in your News Community Media newspaper or visit <a href="http://www.snapaustralia.com.au/" target="_blank">snapaustralia.com.au</a></p>
<p><strong>Who are the Canon Collective?</strong></p>
<p>The Canon Collective provide people with a range of unique experiences to learn and practice photographic skills together, regardless of age or skill. Why not come and join us?</p>
<ul>
<li>Enjoy unique photography experiences</li>
<li>Meet passionate people</li>
<li>Try the latest Canon gear</li>
</ul>
<p>Take a look at the <a href="https://www.canon.com.au/en-AU/Personal/imageSpectrum/Community/collective-home/Collective-Events" target="_blank">Canon Collective site</a> and select your location for photography events near you.</p>
<span id="pty_trigger"></span>

Canon EF 600mm f/4 DO IS To Arrive in Late 2017 [CR2]

applecider said:
Tron interesting that weight could be uncertain. Even within the digital picture review there are inconsistencies. I still think the lighter weights are without hood. How the manufacturer's weight and actual scale weight differ is another matter. In my own case with other great whites I've added custom feet, that change the weight a little.

Which brings up a small pet peeve of mine, I wish canon would just add acra swiss compatibility to their own feet. Then they'd fit in cases better etc. And the cases should have rollers on them and luggage handles, at least the larger ones.
I add Arca swiss plates to my white lenses too. And I use hoods too. The advantages over weigh the slight weight increase disadvantage...
Upvote 0

DIY pipe/conduit supports for lighting?

So I recently came across a Kickstarter for couplers/connectors to make things out of EMT conduit. (I'm not here to shill for them so I'm not going to link them; I bet you can find it if you search, or PM me.)

It got me thinking though: does anyone use pipe/conduit to make supports or backdrop holders, etc.? I'm wondering if folks here have tips or tricks for doing such things. What materials do you use? Did you design it to be broken down between sessions or is it always "up"?

It's not nearly as travel-friendly as a traditional three-legged light stand, but possibly more stable and versatile depending on design? Maybe cheaper too. Even a reasonably cheap Impact background support system is over $100.

Or maybe I'm nuts for even considering this stuff. I'm sure you'll let me know if so. :P

7D Mark II and new 18-135 USM kit? (and other ques's)

ajfotofilmagem said:
Canon used its product pricing policy "new" for this particular kit. Yes, it is absurd to buy a body kit and lens without any discount when compared to products purchased separately. The market logic will make the price fall in the coming months.

Thanks - I guess I'll just keep monitoring it. Would be nice to see that kit with an appropriately discounted price.
Upvote 0

Quirky, yellow dSLR used by press ''tog

Hi unfocused.
I have one (Camera Armor) for my 40D, bought it when I got the camera new, wanted to love it, hated it! It made a really nice quality feeling camera feel like a piece of crap toy, it spent no more than a couple of hours on there before being removed to its box, I tried it again recently, nothing changed, feels like crap, wasted hard earned cash.
Don't know about a dust magnet but I can envisage dust and environmental debris getting in between the cover and camera and doing more damage than without it.
Hope this helps!

Cheers, Graham.

unfocused said:
i wonder if anyone has any experience with those skins. I wouldn't use one everyday, but might consider it as a bit of extra insurance on occasion. My suspicion though is that they may not provide protection where it is really needed and if it's like a phone case, the covering can be a dust magnet.

As to the original question, pimpyourcam.com in Germany has some cool stuff on their website. Don't know if they are still in business, the site hasn't changed since 2012.
Upvote 0

ExploreCams data updated

Data updated on 10/3 by ExploreCams, who mines internet EXIF data:

(by rank)
https://explorecams.com/stats/top/models

(in fun interactive pinwheel charts)
https://explorecams.com/stats/global

Of note, Sony's not even in the top 20 by camera ranking (of shots posted online), which is a little hard to believe. Any chance Sony folks are getting their EXIF data scrubbed somehow, perhaps by a wifi/bluetooth protocol trying to save a byte or two as it posts to social media?

- A

Attachments

  • Screen Shot 2016-10-06 at 9.57.09 AM.png
    Screen Shot 2016-10-06 at 9.57.09 AM.png
    87.8 KB · Views: 168

Lightweight lens for wildlife/birding

AlanF said:
scyrene said:
AlanF said:
unfocused said:
AlanF said:
The Old World has bird hides in most reserves that would pass off as luxury hotels in the Yukon...

More information please! What countries? How do you find out about them? I want to go to there!

In the U.K., the largest organisation is the RSPB, the Royal Society for the Protection of Birds. Look at their website. We have various Wild Life and Wetland Trusts in our different counties. I pay for membership of three of these. These organisations are just so good. Some just have a reserve plus hides. Others have cafes and nature-related shops as well. The Dutch are great birdwatchers as well, but I don't have details on their facilities.

And I would add, even most of the small local nature reserves have a hide or two, although they tend to resemble sheds.

All they lack are birds. I'm not joking. It's long patient waiting much of the time. Thousands of bird reserves but a shortage of birds. It's the thrill of the chase that keeps you going here.

Lol. Well I tend only to go to places when I've seen reports of something interesting. Fortunately, my local bird club posts incredibly thorough and detailed daily news :)
Upvote 0

1dx2 video file - odd behavior

What I have learned from this thread for myself personally is to not to jump to conclusions and resist being judgmental. It's so easy to presume things that may not be true.

It's nice when CR threads can share exchanges without hostilities creeping in even though there are differences of opinion. Since I will soon have my 1DX II I'm watching all the related threads hoping to learn a lot in short order! ;)

Jack
Upvote 0

70-200L autofocus on center vs. peripheral focus points

something else to consider.. if the lens is becoming a bit de-centered (micro movement of adjustment spacing/parts wearing out over time) this may also look like miss focus? Possibly? Maybe it can't focus properly or as well in that case? If it was in one particular corner? I'd also make sure it was at least a cross point you are using.. horizontal or vertical only points can be near useless in low light.
Upvote 0

Filter

Forum statistics

Threads
37,480
Messages
975,426
Members
24,816
Latest member
GLBDD

Gallery statistics

Categories
1
Albums
29
Uploaded media
372
Embedded media
1
Comments
25
Disk usage
1 GB