Arent optical advantages also size advantages. Less needed correction lenses ,smaller stuff?I was mostly joking, but I meant the inner barrel would retract mostly to protect it when unattached. Although I guess it could be fixed and come with a new type of rear lens cap. I presume there are some optical, rather than size, advantages to having a ridiculously short backfocus distance in these designs.
I'd pretend I would be a little mad as someone who just picked up the R5 and 35mm 1.8 as my everyday compact carry camera, but if Canon released a fixed lens full frame compact 35mm 1.4 camera I would probably still end up with one anyway for the fun of it
Setting aside the 0.00mm model, these could theoretically be mounted on the R. I suppose some current RF lenses already extend quite a ways into the camera. I had the Contax G2 in the 90s, and its 16/8 lens was almost entirely inside the camera. In the early 70s I think all the big companies had 21mm lenses for their SLRs that required you lock up the mirror before shooting, because they extended into the camera. (21mm being just over 90 degrees and good for capturing an entire room in a photo.)
curious note is that they usually state something like this or automotive applications. but it's decidedly full frame, which is odd, and as far as "purposes of illustration of use" they show a camera. So I don't know. I do know they are completeyl bizzare designs that i've never seen the like before.some sort of industrial QC camera or satellite camera? Or hi res security cam?
curious note is that they usually state something like this or automotive applications. but it's decidedly full frame, which is odd, and as far as "purposes of illustration of use" they show a camera. So I don't know. I do know they are completeyl bizzare designs that i've never seen the like before.
Almost as if the sensor were immersed within the rear elementI think I know where Canon is heading with this. The electronic shutter has several issues, especially sports or panning. Canon may be on the way to a totally new method of reading the sensor. Currently, the sensor is read while it is still gathering photons. My thought is Canon might be designing a sensor where all the sensor's photodiodes are turned off at the desired shutter speed, then read. If this is where they are heading, there will be no need for the mechanical shutter, it will allow lens designs with minimal rear element to sensor distance. The closer the rear element is to the sensor, aberrations like Chromatic, Coma, and Spherical will be greatly reduced. If a lens has a minute amount of aberrations at the exit of the last element, the distance to the sensor is the key. Kind of like light going through a prism- the further away the prism is from the viewing surface, the wider the rainbow.(more noticeable Chromatic aberration) The final result is higher resolution and better contrast.
Off on another tangent...
If the rear element was as close to the imaging sensor as possible, the lens's IS corrections for camera shake would be more effective due to shorter distance traveled from the IS elements to the image plane. Depending on the focal length of the lens and where the IS lens group distance from the focal plane, the len's IS could be more effective by a great percentage. By having the rear element deep inside the body, it may be possible to have the IS as far back as the lens mount. This would(depending on the lens) give a few more stops of effective stabilization. Coupled with IBIS, that would be huge advantage for hand held photo and video shooters.
yes, but SLRs had a backfocus distance of over 40mm.To be clear I'm talking about some old SLR lenses that required you to lock up the mirror before use. They came with an external viewfinder you put on the hotshoe. IIRC all the main brands made such a 21mm maybe late 60s/early 70s.
That is one possibility that could be quite interestingWe have been wondering what Canon meant when they said that they would launch a new camera concept initiative this fall. Perhaps this is related?
View attachment 192142
yes, but SLRs had a backfocus distance of over 40mm.
the R has a backfocus distance of 20mm, you can't get to 0mm to 3.5mm because there's a shutter in front of the sensor.
you can get 10-20mm back on an SLR lens without hitting the shutter because you are still ~20mm away from the film plane / sensor, you have to mirror lockup, but that's something different.
Not a problem if you mount it between remote controlled twin 50's .a problem is you don't want the security camera to be so valuable that people just come in to steal the camera