That fits with my observation that the number of new spots on my RP sensor greatly decreased after leaving the filter adapter on there for multiple weeks.[...] Incidentally, I suspect it’s about more than just lens changes. The camera spends a lot more time powered off than it does powered on, so there is a lot more time for dust to settle in the interior when the power is off. If the sensor is covered during that time, the dust will settle on the shutter and not the sensor.
It was €2999 for a few months due to the €650 cashback during the winter promotion. If you had price alerts configured you could get if for even less during that time. I had sold my R5 a few weeks before the cashboard started and I could've bought a brand new one for less than I received for my used one!The R5 in the netherlands is priced today at 3749 euro's at the moment compared to 2729 euro's for the R6 mark II. How far do you think will the price drop for the R5 after the launch of the MK2? will it be at the level of the R6 mark II?

This caught me by surprise too. Silent shutter means it won't close the shutter when turning it off... I wish there was a way to override it to ALWAYS close the shutter when turning it off, no matter what. But that would probably make too much sense for Canon to consider...I know we’ve had this debate already, but now I’m convinced that the shutter helps keep dust off the sensor. I mentioned before that my R8 accumulates dust quite readily, where is my R3 does not. Well…did not. I recently noticed some spots in stopped-down shots that I had to clean up in post.
So what changed? I have been shooting primarily musical events lately, and have left the camera in silent mode for the past couple of months. I typically don’t look into the camera when changing lenses (I keep the mount opening pointed down), but the other day I happened to do so, and noticed that the bare sensor was staring back at me despite powering the camera off to change lenses as I typically do. I went into the settings to confirm that I had not somehow changed it to not close the shutter with the power off, and the setting was grayed out – apparently, that option is not available when the camera is in silent mode.
Same ultrasonic cleaning happening, only difference is the shutter wasn’t closing with the power off. So, I’ll clean the sensor…and stop leaving the camera in silent mode.
Incidentally, I suspect it’s about more than just lens changes. The camera spends a lot more time powered off than it does powered on, so there is a lot more time for dust to settle in the interior when the power is off. If the sensor is covered during that time, the dust will settle on the shutter and not the sensor.
I've got 2 of them, if you invest in expensive glass, the pictures speak for themselves.So nothing vastly different from the original R5 then, except possibly a faster readout speed since they're going all electronic shutter. More reason to take advantage of the reduced price on the original R5, which is still a fantastic camera by today's standards.
There is. Don’t use Silent Shutter mode (which disables everything that makes a noise). Instead, shoot in electronic shutter and turn all electronic sounds off (focus confirmation beeps, etc). Then the mechanical shutter will still close at shut down and no sounds will be made while shooting.This caught me by surprise too. Silent shutter means it won't close the shutter when turning it off... I wish there was a way to override it to ALWAYS close the shutter when turning it off, no matter what. But that would probably make too much sense for Canon to consider...
Well, make sure to preserve the camera you have now, then, because this is what we're going to.I was waiting for this but no mechanical shutter is a big pass for me... not a good idea for dust and having a lens focusing light to the sensor itself even if it's off...
Well, there STILL might be a sensor cover internally.I was waiting for this but no mechanical shutter is a big pass for me... not a good idea for dust and having a lens focusing light to the sensor itself even if it's off...
Interesting, especially this last paragraph. Makes sense; I’ll reconsider my view of the usefulness of having the shutter close when changing lenses, but more specifically the shutter closing when the camera is switched off.Incidentally, I suspect it’s about more than just lens changes. The camera spends a lot more time powered off than it does powered on, so there is a lot more time for dust to settle in the interior when the power is off. If the sensor is covered during that time, the dust will settle on the shutter and not the sensor.
I hope there is an anti-dust curtain at least. It can be a cheap addition as it doesn't have to be fast and sophisticated. Nikon has such a curtain in top end cameras (called a sensor shield)I was waiting for this but no mechanical shutter is a big pass for me... not a good idea for dust and having a lens focusing light to the sensor itself even if it's off...