I had my 50 1.4 in a soft canon bag and sadly dropped it on concrete at a gig the other night. upon looking at it everything looked Ok, but I could hear a little movement inside. I put it on my camera (6D) and got a couple of shots that seem like the glass inside is Ok but I could get no AF and no MF would work either. It's stuck at the infinity side of the focus ring. I'm assuming the impact jacked up the focus motor, do you guys know if this is a common thing? And if it's worth fixing it or should I just buy a new one at $349 currently with rebates. I could also perhaps make the jump to the 1.2L I suppose.....
Here's a couple sample shots I got after the damage but before I seemed to lose all ability to focus at all. Obviously I didn't use these as they are still pretty soft but at least you can see some kind of picture after the damage. A couple shots after these it was completely blurry with no hope of change. This is straight out of the cam JPEG with no post editing.
Here's a couple sample shots I got after the damage but before I seemed to lose all ability to focus at all. Obviously I didn't use these as they are still pretty soft but at least you can see some kind of picture after the damage. A couple shots after these it was completely blurry with no hope of change. This is straight out of the cam JPEG with no post editing.