5D Mark III Frustrated Focusing problem

  • Thread starter Thread starter JohnFrancis
  • Start date Start date
Status
Not open for further replies.
J

JohnFrancis

Guest
I am rather frustrated with some of the shots I am getting, in particular when I have two subjects I want to get in focus, but the one closest to the camera only comes in focus?
Also what is a good setting for getting the whole frame in focus, I have only been get certain parts of an image in focus when I want to get everything in focus?
Please help
Thanks
 
JohnFrancis said:
I am rather frustrated with some of the shots I am getting, in particular when I have two subjects I want to get in focus, but the one closest to the camera only comes in focus?
Also what is a good setting for getting the whole frame in focus, I have only been get certain parts of an image in focus when I want to get everything in focus?
Please help
Thanks
Sounds like you are new to DSLR photography. I suggest you go through the videos at dslrtips.com/workshops (especailly "How to photograph landscapes with lots in focus") or just go to youtube and search for DSLR tutorials or Brian Peterson like neuroanatomist suggested.
Some people here think that if you can afford to buy an expensive DSLR you cannot ask beginner questions ... but nothing wrong with asking questions that to some might look stupid than to remian stupid.
 
Upvote 0
When you get into FF sensors, you will get a much shallower depth of field than with a small sensor camera. With a point and shoot camera, for example, almost everything tends to be in focus. That makes them easy to use and get sharp in-focus shots.
With a FF DSLR, photographers use the ability to have a shallow depth of field to isolate a subject and have things in the background be out of focus.
However, there are times when you want as much as possible to be in focus, landscapes, or groups of people. In cases like this, you must use small apertures, f/8, f/11, even f/16.
Setup your camera and take several shots focusing on something fairly close with a few different apertures and you will see the difference in background focus.
Then, step back a ways and do the same thing. Notice that the depth of field is greater when you are back from your subject.
Use a combination of these techniques to control what is in focus.
 
Upvote 0
It don´t sounds like an focussing issue.

It seems to be a problem with the depth of field.

Select a small aperture (big aperture number) from f/8 to f/16 to solve the problem or change the distance to the subjects.

Remember:
Everyone can shot a image with a compact camera or APS-C-DSLR and all is in focus. If you use a FF camera you have the benefit to select subjects that are in focus. I recommend to all newbies in photography: don´t buy a FF camera if you don´t have the skills to work with it and you want everytime everything in focus.
 
Upvote 0
I assume you are all referring to Bryan Peterson's Understanding Exposure?

i.e. http://www.amazon.com/Understanding-Exposure-3rd-Edition-Photographs/dp/0817439390/ref=sr_1_1?ie=UTF8&qid=1355123291&sr=8-1&keywords=perfect+exposure+bryan+peterson

It does seem to be the defacto standard for beginning photographers. As an experienced photographer, I found some things quite oversimplified and some things he said that don't matter really do matter in cameras like the 5D Mark III, if you're going for maximum quality (like choosing f/22 apertures). Also, it won't tell you how to use the AF system of the 5D3, you'll want to read Canon's http://learn.usa.canon.com/resources/articles/2012/1dx_guidebook.shtml. You'll also want to search around for "5D Mark III af tutorial" on Google for more information.

All that said, you really should pick up a copy of Understanding Exposure and read it.
 
Upvote 0
JohnFrancis said:
I am rather frustrated with some of the shots I am getting, in particular when I have two subjects I want to get in focus, but the one closest to the camera only comes in focus?

Don't use all AF points at once, chose on and put it over the subject.

Also what is a good setting for getting the whole frame in focus, I have only been get certain parts of an image in focus when I want to get everything in focus?
Please help
Thanks

stop down the aperture, try f/8 or more and don't focus too much towards the front of the scene
 
Upvote 0
well i guess he is not trolling like some clowns here think.
but i guess you guys are experts in any field... from photography to quantum physics... ::)

when someone comes from a P&S camera this question comes up naturally.

i have sold my share of DSLR cameras where the buyer comes back a few days later complainins that he don´t get everything in focus for his EBAY pictures.

they normaly say something like:

my 200$ point and shoot camera has everything in focus. now with this 2000$ camera everything is blurred

and i have customers who never owned a camera and buy a 5D MK2 or now MK3.. so what?
because you are poor that´s not possible? :P
 
Upvote 0
Empathy notwithstanding, OP reminds me of the woman that bought a big Winnebago motorhome, put it on cruise control, left the wheel to make herself a sandwich (or something) and was surprised the unsupervised vehicle crashed. Even won her a big settlement, but I think a little common sense goes a long way.

If you blindly buy and things do not go as planned, there always is the chance that the fault lies with you; so you probably could expect the - very mild! - criticism in this topic. If you can't handle that, you probably really are spoiled rotten and deserving of disappointment. After all, you best learn through failure ;)

Unless, of course, it really was a troll. Proficient in more ways than one, in that case :D
 
Upvote 0
Gothmoth said:
and i have customers who never owned a camera and buy a 5D MK2 or now MK3.. so what?
because you are poor that´s not possible? :P

I am absolutely in favor of lots of people buying expensive Canon gear, that way Canon makes great profit, their execs relax and marketing can be more lenient with cutting down features on less expensive gear, and Canon can do more r&d.

But a question like from the op is great if asked in a camera store where you just have spent a lot of $$$ and think you were ripped off by some clown because you were better off with a p&s. But in an internet forum questions w/o further specifications is strange and bordering on "My friend got a Nikon, the pictures are crisper, my Canon is all dull - what do you think?"

LewisShermer said:
We're cyber bullies :(

But actually it's gotten better, when I joined CR my impression that every other post was either answered with either "Begone, Nikon troll" or "Get a job, then you'll be able to afford decent gear and your problems will be over" :-o
 
Upvote 0
For some people it might be easier to point the blame on the camera rather than admitting they are new and need help. Realistically though a person would think that someone with a top-end camera would know a certain amount of technique, but as stated before that's not always the case. The same goes for the example of a person getting a Ferrari as a first car, it shouldn't be a starter for learning how to drive. There's no rule that says a person can't have the best or whatever they can afford, but we always don't like to hear the advice so nothing is asked. ;)
 
Upvote 0
Right out of the box in the "Auto-Everything mode" Scene-Intelligent-auto (the green setting on the mode dial) the camera will focus on the nearest thing. Switch the mode to "P", press the button 1/2 way down and the camera will focus on what ever the little square in the center is pointed at. I'm not trying to talk down to you but if you are new to this camera that's the first thing that comes to mind. BTW, you are going to have to read the manual on this camera.
good luck
 
Upvote 0
Status
Not open for further replies.