AutoISO messed up.... AGAIN? arrrrrrr it's just not that difficult

[kenraw]

I don't understand this fact that there isn't EC in maunual mode
of course there isnt that's why its called manual mode, because you set the exposure yourself. If it's a little over exposed you just alter you f stop,shutter or iso to get the exposure where you want simple.

In manual i have the front dial to set aperture and my back dial to set shutter, so in effect its like using AV but changing the shutter now has the same effect as EC, as all EC does anyway is alter your shutter or aperture depending on which mode youre in av or tv.

So the auto iso will help out a bit here. however I find the limit of 1/250th a little low myself, but I suppose when you know your subject inside out auto iso is mainly for ameuters anyway.

 

[bloodstupid]

You guys get any responses yet? I get that they will pass it on to their engineering guys..

 

[briansquibb]

Of course there is EC in full manual mode. Just not with AutoISO unless you have a series 1 body

 

[milnerstudios]

Manual Mode 5D mark iii

I have purchased the new 5d mk iii. which arrived today and have been testing it performance, especially the manual mode as thats what I shoot with the most. I hoped there would be an auto ISO setting for manual, which there is BUT
why cannot I set an exposure compensation while in Manual mode with auto ISO?
I always use manual mode to control shutter and aperture. I meter my exposures from my client's faces that are usually set at +1EV to accommodate light skin. Auto ISO would allow me to keep up with rapidly moving children as ISO speed is not so critical as shutter and aperture setting for me. I appreciate the new advantage of auto ISO that the mark ii did not have, but now my exposures will be a full stop under-exposed using the advantages of auto ISO with the mark iii

 

[wickidwombat]

Re: Manual Mode 5D mark iii

I have purchased the new 5d mk iii. which arrived today and have been testing it performance, especially the manual mode as thats what I shoot with the most. I hoped there would be an auto ISO setting for manual, which there is BUT
why cannot I set an exposure compensation while in Manual mode with auto ISO?
I always use manual mode to control shutter and aperture. I meter my exposures from my client's faces that are usually set at +1EV to accommodate light skin. Auto ISO would allow me to keep up with rapidly moving children as ISO speed is not so critical as shutter and aperture setting for me. I appreciate the new advantage of auto ISO that the mark ii did not have, but now my exposures will be a full stop under-exposed using the advantages of auto ISO with the mark iii

yep there was a big hooo haa about this the last couple of days i'll find the thread unless it got deleted because people got a bit excited

here you go
http://www.canonrumors.com/forum/index.php/topic,4367.0.html

 

[thure1982]

Re: Manual Mode 5D mark iii

why cannot I set an exposure compensation while in Manual mode with auto ISO?

Because your in manual!
YOU set the exposure in the picture.
Exposure comensation means that the camera sets the exposure and then you tell it, one stop brighter please or that need to be 2 stops darker please and then the camera adjust likewise.

If you control the parameters manually then the camera cannot adjust them accordingly.

 

[briansquibb]

Re: Manual Mode 5D mark iii

This is how to do it on a series 1 body - using AV mode

http://www.canonrumors.com/forum/index.php/topic,4367.msg89997.html#msg89997

 

[citro]

Re: Manual Mode 5D mark iii

why cannot I set an exposure compensation while in Manual mode with auto ISO?

Because your in manual!
YOU set the exposure in the picture.

thure1982 was talking about M+AutoISO and he is right.
Exposure is a product of apperture, shutter speed and ISO; each time you set camera on auto-something, it will default on standard exposure and – according the scene – EC might required. EG: during winter time, lack of EC leaves this mode useless.

 

[briansquibb]

Re: Manual Mode 5D mark iii

why cannot I set an exposure compensation while in Manual mode with auto ISO?

Because your in manual!
YOU set the exposure in the picture.

thure1982 was talking about M+AutoISO and he is right.
Exposure is a product of apperture, shutter speed and ISO; each time you set camera on auto-something, it will default on standard exposure and – according the scene – EC might required. EG: during winter time, lack of EC leaves this mode useless.

Suggest you read the link - gives you what you want using another way

 

[Bosman]

Re: Manual Mode 5D mark iii

I have purchased the new 5d mk iii. which arrived today and have been testing it performance, especially the manual mode as thats what I shoot with the most. I hoped there would be an auto ISO setting for manual, which there is BUT
why cannot I set an exposure compensation while in Manual mode with auto ISO?
I always use manual mode to control shutter and aperture. I meter my exposures from my client's faces that are usually set at +1EV to accommodate light skin. Auto ISO would allow me to keep up with rapidly moving children as ISO speed is not so critical as shutter and aperture setting for me. I appreciate the new advantage of auto ISO that the mark ii did not have, but now my exposures will be a full stop under-exposed using the advantages of auto ISO with the mark iii

When i put my 1DM3 in manual the meter in the window on top doesnt even show up because yea its manual if you swing your aperture way high or way low it will drop to over or under expose based on the range of your iso selection. The bigger the range of auto iso the more you will see the meter dead center. It actually works like a charm. Still it would be nioce like on your cam you can set the flash to always expose a third over. Of course i'd love that option even for manual. Maybe they could make the iso higher when you want a third over...hmmm

 

[briansquibb]

Re: Manual Mode 5D mark iii

I have purchased the new 5d mk iii. which arrived today and have been testing it performance, especially the manual mode as thats what I shoot with the most. I hoped there would be an auto ISO setting for manual, which there is BUT
why cannot I set an exposure compensation while in Manual mode with auto ISO?
I always use manual mode to control shutter and aperture. I meter my exposures from my client's faces that are usually set at +1EV to accommodate light skin. Auto ISO would allow me to keep up with rapidly moving children as ISO speed is not so critical as shutter and aperture setting for me. I appreciate the new advantage of auto ISO that the mark ii did not have, but now my exposures will be a full stop under-exposed using the advantages of auto ISO with the mark iii

When i put my 1DM3 in manual the meter in the window on top doesnt even show up because yea its manual if you swing your aperture way high or way low it will drop to over or under expose based on the range of your iso selection. The bigger the range of auto iso the more you will see the meter dead center. It actually works like a charm. Still it would be nioce like on your cam you can set the flash to always expose a third over. Of course i'd love that option even for manual. Maybe they could make the iso higher when you want a third over...hmmm

Flash and auto iso is not a good mix

 

[Bosman]

Re: Manual Mode 5D mark iii

I have purchased the new 5d mk iii. which arrived today and have been testing it performance, especially the manual mode as thats what I shoot with the most. I hoped there would be an auto ISO setting for manual, which there is BUT
why cannot I set an exposure compensation while in Manual mode with auto ISO?
I always use manual mode to control shutter and aperture. I meter my exposures from my client's faces that are usually set at +1EV to accommodate light skin. Auto ISO would allow me to keep up with rapidly moving children as ISO speed is not so critical as shutter and aperture setting for me. I appreciate the new advantage of auto ISO that the mark ii did not have, but now my exposures will be a full stop under-exposed using the advantages of auto ISO with the mark iii

When i put my 1DM3 in manual the meter in the window on top doesnt even show up because yea its manual if you swing your aperture way high or way low it will drop to over or under expose based on the range of your iso selection. The bigger the range of auto iso the more you will see the meter dead center. It actually works like a charm. Still it would be nioce like on your cam you can set the flash to always expose a third over. Of course i'd love that option even for manual. Maybe they could make the iso higher when you want a third over...hmmm

Flash and auto iso is not a good mix

Test it out, i was curious last night in a drak room and without flash i had to use like 56,000 iso but with flash it dropped down to 400 iso in auto iso setting.

 

[briansquibb]

Re: Manual Mode 5D mark iii

Test it out, i was curious last night in a drak room and without flash i had to use like 56,000 iso but with flash it dropped down to 400 iso in auto iso setting.

Thank you I will - did it overpower the ambient at the same time?

I have till now used manual mode to control it all.

 

[iso79]

Re: Manual Mode 5D mark iii

Learn exposure and how to shoot in manual mode and never look back.

 

[briansquibb]

Re: Manual Mode 5D mark iii

Learn exposure and how to shoot in manual mode and never look back.

Who was this aimed at?

 

[CanineCandidsByL]

I'm kind of summarizing this for myself, but hopefully this will help anyone joining into the conversation. I'm hoping to write an article on it later.

The problem with modern camera modes is they are out of date. Manual doesn't necessary mean fully manual. And automatic doesn't mean fully automatic.

Let look at the classic camera....Four modes which controlled whether the camera controlled aperture, shutter speeds, both, or neither...

Manual - Camera controlled nothing
Aperture priority - Aperture was manual, but shutter speed was automatic
Shutter priority - Shutter speed was manual, but aperture was automatic
Automatic/program mode - Aperture and Shutter speed are both automatic; The camera is making all the decisions;


Notice that nothing is said about ISO. While it was possible to set/change the ISO, generally it was fixed to the actual speed of the film being used. Without changing the film, it wasn't possible for ISO to be changed.

With digital cameras, ISO became as adjustable as aperture and shutter speed. What this really meant was we no longer need 4settings, but 8. Cameras could have been change to have
Manual & Manual ISO
Manual & Auto ISO
Aperture Priority & Manual ISO
Aperture Priority & Auto ISO
Shutter Priority & Manual ISO
Shutter Priority & Auto ISO
Auto/Program & Manual ISO
Auto/Program & Auto ISO

No camera does this. Nor have we gotten away from the program modes and simply switched over to a menu where we set each of the 3 possibilities to either manual or auto. This probably would be too foreign for classic photographers, but would get everyone in the right mindset. Instead, we left the four original settings, and have a separate ISO setting that is either the manually selected ISO or "Auto".

However, camera manufactures are forgetting that the classic manual mode, may still contain an automatic setting (ISO). If this is automatic, and EV adjustments aren't allowed, you actually have created a new, worse form of automatic. A situation where your manual settings of aperture and shutter speed, get ruined by the cameras automatic select of ISO. No matter what changes you make the camera can continue to make your exposure too light or dark.

This is the crux of the problem. Automatic mode can be partially manual (by manually setting the ISO) and manual mode can be partially automatic (by having the camera automatically set ISO). We need both photographers and camera manufactures to recognize the new combination of modes and fully support them. That means EV adjustment for everything except total (Aperture, shutter, ISO) manual mode.

 

[briansquibb]

This is the crux of the problem. Automatic mode can be partially manual (by manually setting the ISO) and manual mode can be partially automatic (by having the camera automatically set ISO). We need both photographers and camera manufactures to recognize the new combination of modes and fully support them. That means EV adjustment for everything except total (Aperture, shutter, ISO) manual mode.

Did you not see the post that describes AV mode with auto ISO where the shutter speed is also set and EV adjustment is available? This is the equivalent to manual with auto iso PLUS EC

http://www.canonrumors.com/forum/index.php/topic,4367.msg94459.html#msg94459

 

[CanineCandidsByL]

Did you not see the post that describes AV mode with auto ISO where the shutter speed is also set and EV adjustment is available? This is the equivalent to manual with auto iso PLUS EC

http://www.canonrumors.com/forum/index.php/topic,4367.msg94459.html#msg94459

I have now....sorry, and thank you.

 

[briansquibb]

Did you not see the post that describes AV mode with auto ISO where the shutter speed is also set and EV adjustment is available? This is the equivalent to manual with auto iso PLUS EC

http://www.canonrumors.com/forum/index.php/topic,4367.msg94459.html#msg94459

I have now....sorry, and thank you.

8) 8) 8) 8)

 

[bloodstupid]

Re: Manual Mode 5D mark iii

This is how to do it on a series 1 body - using AV mode

http://www.canonrumors.com/forum/index.php/topic,4367.msg89997.html#msg89997

The original complaint was about the 5d III, what a 1 series can do isnt much of a help.