I'm gonna be hated but I'd like to see an equivalent to the EF-S 10-22 for APSC. I don't mind f/7.1 or anything like that as long as is compact and has reasonable optical quality (yes, the EF-S one was garbage in terms of IQ).
Upvote
0
The 28-70/2 takes 95mm filters, perhaps they’ll match that.Nikon's Z 14-24 f/2.8 has a 112 mm filter thread whereas the Canon's RF 15-35 f/2.8 one is 82 mm. I know there's 1 mm difference but... there is still some hope. Canon got 1 mm wider from EF to RF but still kept the filter thread size.
If Canon comes up with an APS-C RF Camera (not in an R7 style) I think a RF-S 10-22mm should be a given.I'm gonna be hated but I'd like to see an equivalent to the EF-S 10-22 for APSC. I don't mind f/7.1 or anything like that as long as is compact and has reasonable optical quality (yes, the EF-S one was garbage in terms of IQ).
Specs are one thing (lens weight is always without caps or tripod collar), but I checked it with my kitchen scale, which is precise.The original Canon specs are 110 g for the basic adapter, 130 g for the control ring adapter, and 121 g for the drop-in filter version. So perhaps yours has a rock inside it or something.
The canon ones weight 109.91g according to my kitchen scaleSpecs are one thing (lens weight is always without caps or tripod collar), but I checked it with my kitchen scale, which is precise.
The Meike adapter weights 111g - yes...
Your kitchen scale may be precise, but evidently it's not accurate. You know the difference between precision and accuracy – yes...?Specs are one thing (lens weight is always without caps or tripod collar), but I checked it with my kitchen scale, which is precise.
The Meike adapter weights 111g - yes...
Assuming Canon's usual naming scheme, the mount diameter of the 14-35 lens hood will be 83mm. It's highly unlikely that Canon would be able or willing to fit a 82mm threaded filter inside it (especially as they could just increase the lens hood diameter instead).The Z14-30/4 has a 82mm filter thread. I can't see Canon being able to go to 14mm without increasing the thread to 82mm as well.
Where did you find the name of the lens hood of an unreleased lens?Assuming Canon's usual naming scheme, the mount diameter of the 14-35 lens hood will be 83mm. It's highly unlikely that Canon would be able or willing to fit a 82mm threaded filter inside it (especially as they could just increase the lens hood diameter instead).
And you know the difference between cap and no cap? ;-)Your kitchen scale may be precise, but evidently it's not accurate. You know the difference between precision and accuracy – yes...?
You're right, an EW-83 hood means the lens won't take 82mm filters, it actually suggests rather strongly that the RF 14-35/4 will take 77mm filters. That's great in one way (convenience), but makes be a bit concerned about the optical compromises necessary to make that happen (e.g. wicked vignetting wide open at 14mm).
And you know the difference between cap and no cap? ;-)
The Canon 111g without, 149g with.
The original statement was, "...the EF-RF adapter adds 110grams to those EF lenses when used on an RF body."Don't forget that the EF-RF adapter adds 110grams to those EF lenses when used on an RF body.
So you must be the one, who carry only one lens and the body alone. The bag industry is a whole scam, nobody need them really.The original statement was, "...the EF-RF adapter adds 110grams to those EF lenses when used on an RF body."
You do understand that adapters, when used on an RF body, are used without the caps, right? Kinda hard to mount the lens to the adapter or the adapter to the body with the caps on the adapter.
So you do understand that when one is considering the extra weight added by using the adapter to mount an EF lens to an RF body, it's the weight of the adapter, without the caps, that is the relevant measurement?
Geez, I really didn't think anyone could be that daft. I was wrong about that.
Nice job doubling down on your ridiculous line of reasoning. The statement to which you responded was about using the adapter, not about carrying it around. In use, the weight of the adapter is 110g. Like many people on this forum, you apparently lack the ability to admit you are wrong. I find that to be pathetic.So you must be the one, who carry only one lens and the body alone. The bag industry is a whole scam, nobody need them really.
If you have to switch - even with all other RF native lens and only one EF lens, you carry the caps, I am sure about that.
And arrogance is never a good feature.
The name of the lense hood is directly linked to the size of the filter thread. The RF 24-105mm F4 L lense hoods name is EW-83N (at least in Germany) at the filter size is still 77mm.Assuming Canon's usual naming scheme, the mount diameter of the 14-35 lens hood will be 83mm. It's highly unlikely that Canon would be able or willing to fit a 82mm threaded filter inside it (especially as they could just increase the lens hood diameter instead).
So much text for so much about careless and about rightness.Personally, I'm not concerned about an extra 39g or even an extra 149g i
Obviously just admitting you were wrong and moving on is something of which you are incapable. Sad.So much text for so much about careless and about rightness.
And again flame war. Do you really need that to prove yourself?
Pathetic, indeed.
The number in the lens hood designation refers to the diameter of the attachment mount of the hood itself. Only in a few select cases is that the same diameter as the filter thread (mainly the 'pancake' lenses where the hood is threaded instead of a bayonet mount, and the hood replicates the filter threads at the front).The name of the lense hood is directly linked to the size of the filter thread. The RF 24-105mm F4 L lense hoods name is EW-83N (at least in Germany) at the filter size is still 77mm.
Thx for the explanation, now it's more clear to me what you mean. I think we're on the same page on this topic. .The number in the lens hood designation refers to the diameter of the attachment mount of the hood itself. Only in a few select cases is that the same diameter as the filter thread (mainly the 'pancake' lenses where the hood is threaded instead of a bayonet mount, and the hood replicates the filter threads at the front).
For bayonet mount hoods, it's the norm for the diameter to be several millimeters larger than the filter threads. Sometimes, it's not enough larger for convenience – for example, the ET-83C on the original 100-400L really didn't leave enough room to get a hand in and turn a CPL, which is why Canon's ET-83D hood for the 100-400 II has a 'window' to adjust a CPL.
Agree that based on the hood designation the RF 14-35/4 will use 77mm filters.
I agree as well. The 24-105mm. F4 with a "83" lense hood designation has a 77mm filter thread.Agree that based on the hood designation the RF 14-35/4 will use 77mm filters.