• The Canon Rumors Forum has officially been shut down as of July 10, 2026.

    All data will be deleted on September 16, 2026.

    the ad free experience will return by July 17, 2026.

Sony 400/4 telephoto on the way....

Status
Not open for further replies.
Oct 26, 2012
193
0
6,126
..details from SonyAlpha rumours.

Said to be "affordable for amateurs".

Absolutely no sign of a new 400/4 coming from Canon ie a scaled up version of the superlative 300/2.8 II would be just fine - very little R&D required!. With slightly smaller aperture it would be slightly lighter and approx same price.

A very sharp 400/4 weighing at about 2.5Kg would be a best seller for Canon IMO.

Funny why Nikon haven't thought of making one for their new high res cameras.
 
Plainsman said:
Said to be "affordable for amateurs".

Absolutely no sign of a new 400/4 coming from Canon ie a scaled up version of the superlative 300/2.8 II would be just fine - very little R&D required!. With slightly smaller aperture it would be slightly lighter and approx same price.

So, is the contention is that a ~$6K lens would be "affordable for amateurs"? Or will the Sony lens just be a lot cheaper? If so, how? A 400/4 will need a 100mm front element just like a 200/2. Will they change the laws of physics (or economics)? Make the elements out of plastic? I just can't see a 400/4 being "affordable". Or maybe they'll take a page from the Pentax book and label the lens with a 'crop factor adjusted' focal length, i.e. try to market a 267mm f/4 lens for APS-C as a real 400mm lens, or maybe a 200/4 for their NEX cameras. ::)
 
Upvote 0
neuroanatomist said:
Plainsman said:
Said to be "affordable for amateurs".

Absolutely no sign of a new 400/4 coming from Canon ie a scaled up version of the superlative 300/2.8 II would be just fine - very little R&D required!. With slightly smaller aperture it would be slightly lighter and approx same price.

So, is the contention is that a ~$6K lens would be "affordable for amateurs"? Or will the Sony lens just be a lot cheaper? If so, how? A 400/4 will need a 100mm front element just like a 200/2. Will they change the laws of physics (or economics)? Make the elements out of plastic? I just can't see a 400/4 being "affordable". Or maybe they'll take a page from the Pentax book and label the lens with a 'crop factor adjusted' focal length, i.e. try to market a 267mm f/4 lens for APS-C as a real 400mm lens, or maybe a 200/4 for their NEX cameras. ::)
Well, to get the resolution of an f/4 lens, you don't actually need the whole 100mm diameter front element to be
there. See, for example, Very Long Baseline Telescopes.

Maybe you could get away with a few small transmitting "zones" around the edges of the notional 100mm lens that's mostly opaque, and perhaps a few dotted around elsewhere to smooth out the Fourier nastiness that might result (I'm guessing this part.).

So you could end up with a lens that has the resolution of a f/4 100mm front element, but with a HORRENDOUS T-stop of f/(hundreds) because of the rubbish light grasp of the mostly-opaque 100mm "lens".
 
Upvote 0
Malte_P said:
Fleetie said:
See, for example, Very Long Baseline Telescopes.

sorry but aren´t that radio telescopes??
Yes, but there are now optical telescopes using the same principle.

The fact is that if you take a large lens that gives you high resolution because of its large size,
you can paint most of it black and leave odd spots of transparent glass around the edges and, I guess, some dotted around inside, and still get that high resolution.
That's why VLBT telescopes exist; there'd be no point in them otherwise.

It's just that your light grasp becomes rubbish when you paint most of your lens black!

So you have a high resolution, but a RUBBISH T-stop because most of your lens/mirror/desert isn't contributing
signal.

Having said that, I am sure there are Fourier "consequences" of only having odd dots on your lens/mirror/desert contributing. I expect the COC "shape" depends on the FT of the pattern of the dots you have chosen. Or something. I'm straying into hand-waving semi-guesswork here; it's been over 20 years since I did Fourier signal theory at uni.

Having said that, I do have a book entitled "Atlas of Optical Transforms" which is a whole book full of 2-D patterns in real space on one page, and the optical Fourier Transform 2-D on the page opposite, so you can compare them and see how one is related to the other.

Then it goes on to show effects of masking out part of a Fourier transform pattern and how the masking affects the reconstituted-from-Fourier pattern back in real space. So you get low- or high-pass spatial filtering.

Fascinating reading, it is.
 
Upvote 0
Status
Not open for further replies.