IF there is one. Plenty of people, myself included, have had zero issues with the update. I've done parties and portraits and even birding with absolutely no problems with AF...
Upvote
0
This is how you downgrade the firmware on a Canon camera
- Thread starter Canon Rumors
- Start date
I always wondered how much that could affect things with camera firmware flashes... and why some people have all sorts of problems after a firmware update.
Dealing a lot w/ PC's and motherboard BIOS upgrades... it was always recommended to 'load optimized defaults' after doing a MB BIOS flash. Most of the time, you could get away with not doing that step... however there have been times that skipping it make things run oddly. It's gotten to the point where I now do it (and reload all my settings), because I got sick of dealing with the aftermath of skipping the step.
Upvote
0
I’ve tried to reset every single thing on my camera to factory. I’ve even loaded up a settings file that came from a working camera, nothing made a difference. So I’m still on the different build vs firmware issues theory. I feel like I’ve tried everything, the only thing left if Canon doesn’t know how or are willing to acknowledge and fix this is to keep sending my camera in trying to have it fixed and then claim a new one after three tries. I’ve paid $6200 for this camera so Im not having “nothing can be done”…
Upvote
0
I’m on 1.4.0 now and it works as it should. But it’s not okay that I can’t use 1.5.0.
Upvote
0
Rolled back to 1.4.0 and my R5 is reborn.
R5 with 1.4.0 and 1.5.0 are two different cameras.
1.5.0 keep focus-jumping when there have many birds in the frame or solo birds with moderate background. It jumps focus point unreasonably to something else, a bird or a tree, whatever it is, hardly keeps the tracking as constancy as it should be.
Another issue is focus hunting. It happens more than before.
The keep rate for birding from 1.5.0 is simply noticeable lower than previous version.
I noticed immediately the difference from the first BIF shots after downgrade back to 1.4.0, the small box follows the bird all the way from the sky until disappeared in the bushes. It's impossible for 1.5.0 to do this, however I do the settings, it would have already jumped the focus at the halfway.
Canon must have trained R5/6 to recognize more. Not only get to know a vehicle, but also to focus with environment aware. Problem is too good to handle, forgot the stability of focus tracking is more important than what can be tracked.
R5 with 1.4.0 and 1.5.0 are two different cameras.
1.5.0 keep focus-jumping when there have many birds in the frame or solo birds with moderate background. It jumps focus point unreasonably to something else, a bird or a tree, whatever it is, hardly keeps the tracking as constancy as it should be.
Another issue is focus hunting. It happens more than before.
The keep rate for birding from 1.5.0 is simply noticeable lower than previous version.
I noticed immediately the difference from the first BIF shots after downgrade back to 1.4.0, the small box follows the bird all the way from the sky until disappeared in the bushes. It's impossible for 1.5.0 to do this, however I do the settings, it would have already jumped the focus at the halfway.
Canon must have trained R5/6 to recognize more. Not only get to know a vehicle, but also to focus with environment aware. Problem is too good to handle, forgot the stability of focus tracking is more important than what can be tracked.
Last edited:
Upvote
0
its canons fault I feel they rushed the new firmware out just for the new video features and the R3 new features that is R5 & R6 users got jealous of
Im hoping they throughly hear out and look at the problems 1.5.0 is causing some of us but at least DOWNGRADING saved us 300-450 dollars sending it too CPS and etc
Upvote
0
"Be aware that hacks like this one always come with an intrinsic risk of damaging your camera. If you feel you have an issue after a firmware update, in most cases it might be more appropriate to wait for the next firmware version instead of rolling back. In the past, when there have been issues with a firmware release, Canon has always been very swift in releasing a fix." - CanonWatch
Upvote
0
I've noticed a significant softness in most of my images shot after upgrading to V15, so I've downgraded to V14.
Upvote
0
Upvote
0
yesterday I got two times black sreen of death (R5 + RF 100-500MM F4.5-7.1 L) during AF in 1minute. AF situation in attached file.
BBF, animal, eye detection on *
Attachments
Last edited:
Upvote
0
you are old enough to know that if plenty of people do not experience something it is not a proof that this something does not exist ... I found a way to repeatedly freeze my R5 v1.5 for example - meaning I can repeat a certain sequence of actions and freeze the camera every 3-4-5 try (why not every time - because in my situation it is related to a timing of pressing certain buttons with certain functions assigned to them with image review after shot enabled... so as I am not a robot to do a proper timely presses, I only hang my camera every 3rd-4th-5th try - but I do it consistently when I do this)
Upvote
0
Can you share what and how so I can see if I can replicated it?
Upvote
0
Being a programmer... the 'steps to duplicate' are so helpful. So many times, we get a complaint of 'it crashed' but little to no explanation what they were doing (and we do take a stab at attempting to duplicate). The ones that say 'this is what you need to do to repeat the crash' are the ones we take seriously and get a fix out asap. Meaning if you can duplicate it, report it to Canon and something will most likely be done about it.
Last edited:
Upvote
0
I don't need to be told "you're old enough to know" something. I said IF there is a problem in my post, I did not say there is definitively no problem. There is no need for smart aleck comments, really. And if I misread your tone, my apologies.
Someone mentioned here or on FB that possibly numerous customizations prior to updating may have something to do with any issues, and a reset fixes it?
Last edited:
Upvote
0
Have people tried changing the settings after updating to 1.5.0?
It seems people thought that they could leave the setting the same after the update...whereas, when I found the AF point to be a bit jumpy after updating, I turned the tracking sensitivity eg. "Switch Tracked Subjects" down a notch from the default of 1, to 0, and all is good.
Anyone else tried this?
It seems people thought that they could leave the setting the same after the update...whereas, when I found the AF point to be a bit jumpy after updating, I turned the tracking sensitivity eg. "Switch Tracked Subjects" down a notch from the default of 1, to 0, and all is good.
Anyone else tried this?
Upvote
0
I have those in My Menu and change them all the time depending on what I shoot so they can’t change without me knowing it.
Besides, it’s just as bad with everything set to factory or with a set up from a working camera.
Upvote
0
Hi, I own an R5 and although I do not shoot 1000 images on a daily basis I did not find apparently issue so far with firmware 1.5.0. But I might be wrong...
However I am confused with Canon support: if indeed so many users experience issues with the latest firmware, it would be nice to hear an official statement from Canon, in order to avoid speculations: is the current sw buggy or at least can they confirm official that there are maybe random AF (and/or other sort of severe issues?). Maybe why not also say if there is expected an update yes/now, when to eventually fix those issues?
This approach will at least make peace of mind and make people less concern for this current firmware situation....
However I am confused with Canon support: if indeed so many users experience issues with the latest firmware, it would be nice to hear an official statement from Canon, in order to avoid speculations: is the current sw buggy or at least can they confirm official that there are maybe random AF (and/or other sort of severe issues?). Maybe why not also say if there is expected an update yes/now, when to eventually fix those issues?
This approach will at least make peace of mind and make people less concern for this current firmware situation....
Upvote
0
Upvote
0
