Cool stuff!I get my cooling system tomorrow. I also have the kolari heat sink mod installed. It helps
Did you do it yourself with the DIY kit or did they do it?
Can you say how much better it works with the heat sink mod? =)
Upvote
0
Cool stuff!I get my cooling system tomorrow. I also have the kolari heat sink mod installed. It helps
Thanks for the report!I’m doing quite a few tests. I don’t think theirs are worth anything IMO. They do everything IPB. I’m doing All-I with My tests as well as all different IS modes.
I’ve seen that IS off vs IS Enhanced is a big difference. I will post my results here in the next week.
Definitely invest in the Sony Tough Cards tho. Times are better with them than my Sandisk Extreme Pro.
Here’s one test I did though with start temp of 73 degrees.
4K60/All-I / IBIS + ENHANCED ON / Clog3
Stock: 40:41 and then after 5 min. 11:55
MOD: 50:29 and then after 5 min. 15:32
In a real world test, it will definitely vary from turning off and on more frequently.
Update: Airflow was helping my resultsI'm having the same results as before the firmware. I've also noticed that the overheat control was removed from the menu.
Great news! Hope it comes soon to the Ninja V =)I"m not getting technical, but set at 8KD29.27 ProRes RAW video recording a Moog One and ARP 2600. Now 40min in uninterrupted. SSD 2TB says 1hour and 12 minutes left before card change ... WOW.
Fan on Ninja v+ just went up one notch. SSD card is hot, but to be expected.
Well Worth the Wait, just AWESOME!!!
Yes, R5 only has HDMI 2.0, as well as the new Atmos. I'm pretty sure 8K 12bit needs HDMI 2.1.I think its canons fault, not Atomos.
You get 12 bit 5k RAW though, if you use the crop mode on the canon. (according to the atomos homepage)
The reason or to quantify the amount of interest.I'd like to understand the demand for GPS.
lower fps in silent shoot?! What I have heart it’s always 20fps!What does it lack that you'd want them to add?
It might be already a bit late to turn it on when you find a use for it (for example, location search in digital asset managers).I’ve never used gps on my camera. Seems like specialty feature for some people but most don’t need it. I have no purpose for it.
Your hallucination that you have reason to doubt the truth of my report is noted.But I know a well known figure in the industry that said to me in a personal conversation that the Canon USA guys admit “they always listen to us”.
My R5 shutter does not close the shutter in response to changing lenses. It closes in response to powering off.Is anyone's r6 shutter not closing when you change lenses after the last update?
Mine was 21 degrees Celsius and I got 36minutes, what compression did u use? And what cards are you using?Guess it is ambient temperature.
I was just able to record 3 back to back 29:59 4K HQ 24fps clips internally using standard battery in my room at 24c. Did not see the overheat warning at all, only stopped because I got bored.
Nice! What SSD are you using? The list of compatible drives is basically the Atomos-connected Angelfire drives and the Kingston server drives. Neither of which are available at reasonable prices where I’m based.I"m not getting technical, but set at 8KD29.27 ProRes RAW video recording a Moog One and ARP 2600. Now 40min in uninterrupted. SSD 2TB says 1hour and 12 minutes left before card change ... WOW.
Fan on Ninja v+ just went up one notch. SSD card is hot, but to be expected.
Well Worth the Wait, just AWESOME!!!
Ah, read about the 5K 12-bit but didn’t see mention of the crop. Would you mind posting a link. Bit disappointed with the news, especially given the marketing push. Atomos would have been aware of what was coming through long in advance. Two years if their marketing blurb is to be believed.I think its canons fault, not Atomos.
You get 12 bit 5k RAW though, if you use the crop mode on the canon. (according to the atomos homepage)
Do you not have a cell phone in your pocket?The camera lacks a huge feature: in-body GPS receiver. Too bad that that needs hardware to be fixed.
It never has, on the R5 or R6. It closes at power off, and considering that Canon specifically advises against changing lenses while the camera is powered on, they likely would not add such a "feature."Is anyone's r6 shutter not closing when you change lenses after the last update?
It flashed warning for about 8 minutes at the 32 minute mark ( after restarting after the 30 minute limit). Then shutdown at the 40 minute total markDid the Camera shut off or just flash the thermal warning?
I used Angelbird. I will try SanDisk. I have one of those as wellWich brand of CF express? SanDisk? It seems the brand card has a strong effect on the overheating.