• The Canon Rumors Forum has officially been shut down as of July 10, 2026.

    All data will be deleted on September 16, 2026.

    the ad free experience will return by July 17, 2026.

50mm Lens Comparison Wide-Open & Does Canon Boost ISO Sneakily?

Status
Not open for further replies.
Re: 50mm Lens Comparison Wide Open & Does Canon Boost ISO Sneakily?

neuroanatomist said:
WillThompson said:
Drizzt321 said:
Hmm...right, it's a 1/2 stop, sorry.

No it is 1/3 stop!

The 1/3 stop steps are: 1.0 1.1 1.2 1.4 1.6 1.8 2.0 .........
No, it's both, or if you prefer, neither. On the half-stop scale, f/1.2 is 1/2-stop wider than f/1.4, but on the 1/3 stop scale, f/1.2 is 1/3-stop wider than f/1.4. See the wikipedia page on f/stops.

Mathematically, f/1.2 really is closest to a 1/2-stop, since 21/2x0.5 = 1.1892), whereas 22/3x0.5 = 1.2599, which personally I'd round to f/1.3.

Thanks Fleetie for the data.

Thanks Neuro for providing the math formulas - I'm going to pretend that I know how to calculate those formulas and simplify the math so an ave Joe could understand:


(5D III - f2.8 or smaller) + (5D III + 50L @ f1.2) = amazing IQ in SUPER LOW LIGHT
 
Upvote 0
Re: 50mm Lens Comparison Wide Open & Does Canon Boost ISO Sneakily?

neuroanatomist said:
WillThompson said:
Drizzt321 said:
Hmm...right, it's a 1/2 stop, sorry.

No it is 1/3 stop!

The 1/3 stop steps are: 1.0 1.1 1.2 1.4 1.6 1.8 2.0 .........
No, it's both, or if you prefer, neither. On the half-stop scale, f/1.2 is 1/2-stop wider than f/1.4, but on the 1/3 stop scale, f/1.2 is 1/3-stop wider than f/1.4. See the wikipedia page on f/stops.

Mathematically, f/1.2 really is closest to a 1/2-stop, since 21/2x0.5 = 1.1892), whereas 22/3x0.5 = 1.2599, which personally I'd round to f/1.3.

Not on a canon camera that actually uses 1/6 stop increments, when setting exposure. The camera uses the standard 1/2 stop nomenclature but uses actuall 1/2 stop increments when set to 1/2 stop steps and the same goes for 1/3 stop steps so the steps will be exactly 1/3 or 1/2 depending on the camera setting.

This means that the difference between a setting of 1.2 and 1.4 will be different depending on camera settings.

In the real world there is 1/3 stop difference as apposed to the representational of 1/2 stop steps!
 
Upvote 0
noisejammer said:
@Fleetie - thanks for doing the test.... I'll take a bow :)
(IMO) This is a swindle that's perpetrated to persuade people to continue buying fast glass.

Thanks guys, I've actually learned something. :)
Knew about the acceptance angle issues of pixels but didn't know a sensitivity tweak was happening w-o me knowing about it when using a very wide aperture setting.
It's not a shooting scenario I often use, typically at f/2.0 or smaller aperture. But now I know about it if necessary.
 
Upvote 0
Re: 50mm Lens Comparison Wide Open & Does Canon Boost ISO Sneakily?

WillThompson said:
Not on a canon camera that actually uses 1/6 stop increments, when setting exposure. The camera uses the standard 1/2 stop nomenclature but uses actuall 1/2 stop increments when set to 1/2 stop steps and the same goes for 1/3 stop steps so the steps will be exactly 1/3 or 1/2 depending on the camera setting.

This means that the difference between a setting of 1.2 and 1.4 will be different depending on camera settings.

In the real world there is 1/3 stop difference as apposed to the representational of 1/2 stop steps!

Fine, but that doesn't address the original issue, which was about the difference between an f/1.4 and an f/1.2 lens.

@Drizzt321 - wide open an f/1.2 lens collects (1.4/1.2)^2 = 1.39 times as much light as a f/1.4 lens. This corresponds to 0.47 stops (not 1 stop.)

That difference is best represented as 1/2-stop, whether or not the settings of the camera result in that complete 1/2-stop being used.
 
Upvote 0
Still only 1/3 stop difference! (When using 1.3 stop steps)

neuroanatomist said:
That difference is best represented as 1/2-stop, whether or not the settings of the camera result in that complete 1/2-stop being used.

Still not correct.


With a 1/2 stop setting f1.2 is actually f1.1892.

With a 1/3 stop setting f1.2 is actually f1.2599.

With both a 1/2 & 1/3 stop setting f1.4 is actually f1.4142.


This difference is why the 1/2 stop setting between f1.4 & f2.0 is f1.7 not f1.6 or f1.8 as it is less confusing due to larger numbers allowing better numeric distinction between settings.

On a side note,

Is a f1.2 lens actually 1/6 stop wider when set to 1/2 stop increments when shot wide open???
 
Upvote 0
Re: Still only 1/3 stop difference! (When using 1.3 stop steps)

WillThompson said:
neuroanatomist said:
That difference is best represented as 1/2-stop, whether or not the settings of the camera result in that complete 1/2-stop being used.

Still not correct.


With a 1/2 stop setting f1.2 is actually f1.1892.

With a 1/3 stop setting f1.2 is actually f1.2599.

With both a 1/2 & 1/3 stop setting f1.4 is actually f1.4142.


This difference is why the 1/2 stop setting between f1.4 & f2.0 is f1.7 not f1.6 or f1.8 as it is less confusing due to larger numbers allowing better numeric distinction between settings.

On a side note,

Is a f1.2 lens actually 1/6 stop wider when set to 1/2 stop increments when shot wide open???

Who are you, DxOMark, unable to consider a lens independent of a camera? ;) Forget about the camera for a moment. Compare an f/1.4 lens vs. an f/1.2 lens, just the lens - how much faster is the f/1.2 lens? Well, neither exactly 1/2 nor exactly 1/3 stop, but 1/2 stop is a better approximation.

To answer your question, 1D X with 85mm f/1.2L II, illumination constant, camera locked down, VF shutter closed, AV mode, ISO 100:

1/3 stop increments: f/1.2, f/1.4, f/1.6, f/1.8, f/2, metered shutter speed 1/50, 1/40, 1/30, 1/25, 1/20 s

1/2 stop increments: f/1.2, f/1.4, f/1.8, f/2, metered shutter speeds 1/45, 1/45 (no change from wide open), 1/30, 1/20 s

1 stop increments: f/1.2, f/1.4, f/2, metered shutter speeds 1/60 s, 1/30 s, 1/15 s
 
Upvote 0
Re: Still only 1/3 stop difference! (When using 1.3 stop steps)

A EOS lens is only functioning to specification when powered up with a body.

The aperture setting is not a passive but an active device!

Is that metered manual or auto exposure?

In auto the camera can skew both settings by 1/6 or is that multiple 1/10's of stops with no indication of f-stop or shutter speed change. (Not sure of the sub step values that Canon uses 1/10 vs 1/6, It has been a long time since I went to Canon school)

So answer me this, how many stops difference is f1.2599 from f1.4142??????
 
Upvote 0
Status
Not open for further replies.