Canon 5D Mark III and what firmware updates you hope to see come thru

[willhuff.net]

Is there any way to set the default zoom when reviewing images and zooming in? I'd like for it to start so that the whole image is displayed, then I have to force it to zoom in. Currently it starts at a zoom level that only displays about 60% of the image.

 

[Tcapp]

Is there any way to set the default zoom when reviewing images and zooming in? I'd like for it to start so that the whole image is displayed, then I have to force it to zoom in. Currently it starts at a zoom level that only displays about 60% of the image.

Push the play button instead of the zoom button?

 

[Daniel Flather]

Is there any way to set the default zoom when reviewing images and zooming in? I'd like for it to start so that the whole image is displayed, then I have to force it to zoom in. Currently it starts at a zoom level that only displays about 60% of the image.

Push the play button instead of the zoom button?

Yes, it's in the menu. I have mine set at 4x (default is 2x). I don't have my camera with me atm, but it know you can set it in the menu.

 

[Daniel Flather]

Is there any way to set the default zoom when reviewing images and zooming in? I'd like for it to start so that the whole image is displayed, then I have to force it to zoom in. Currently it starts at a zoom level that only displays about 60% of the image.

Push the play button instead of the zoom button?

Yes, it's in the menu. I have mine set at 4x (default is 2x). I don't have my camera with me atm, but it know you can set it in the menu.

Go to page 252 of the manual, or, under the playback 3 menu you can set the starting magnification and initial position for the magnified view.

 

[Daniel Flather]

Yes.


http://www.canonrumors.com/forum/index.php?topic=5338.0

 

[LetTheRightLensIn]

add a 2x2 block sampled 1.6x crop mode to video, true 1920x1080 and better reach than the FF mode

lessen in-cam NR, off is off, 100%, at all ISOs, low is 100% luma NR off and only chroma NR, standard is full chroma NR but light luma that preserves details without blotching, High is like the current standard. Make sure video supports detail over NR.

 

[JRS]

I hope they fix the espresso maker. Having a reliable source of caffeen in the morning is essential for us professional photographers. My 5DIII is not very good at making espresso with the current firmware. Hope they fix it!!

Have you even put coffee in it? I thought the manual made it quite clear, but just for your benefit:

1) Make sure the lens is not mounted
2) Pour ground coffee into mirror assembly
3) Mount most expensive lens
4) Add water to battery compartment
5) Press 'SET'

Voila. This is not a firmware issue, please read more carefully in future.

Work like a charm!

 

[Bosman]

I hope they fix the espresso maker. Having a reliable source of caffeen in the morning is essential for us professional photographers. My 5DIII is not very good at making espresso with the current firmware. Hope they fix it!!

Have you even put coffee in it? I thought the manual made it quite clear, but just for your benefit:

1) Make sure the lens is not mounted
2) Pour ground coffee into mirror assembly
3) Mount most expensive lens
4) Add water to battery compartment
5) Press 'SET'

Voila. This is not a firmware issue, please read more carefully in future.

Work like a charm!

Whats the name of that drink?
A Canonchino?

 

[CanineCandidsByL]

Total control over button assignments. Require one button be set to menu so you can't lock yourself out of changes, and make the joystick work the same as now when the menu is selected. When menu isn't selected, allow joystick to act as additional buttons or changes (ISO up/down). Same with touch dial, which you should be allowed to use even out of video mode if desired.

 

[wickidwombat]

i'd really like to have the ability to assign any other function to the rate button such as enable / disable bracketing ie hold the rate button down and scroll the wheel and it automatically dials in the brackets as the 1D have done since the dawn of digital

 

[Orion]

I hope they fix the espresso maker. Having a reliable source of caffeen in the morning is essential for us professional photographers. My 5DIII is not very good at making espresso with the current firmware. Hope they fix it!!

You must've missed this firmware/hardware combo update, then:




seriously though, I am VERY happy with the mkIII . . . it IS the BEST. I would not ask for much except that they release firmware to fix any flash issues, and whatever minor things we can all find, but nothing unexpected with a primo month camera release. . . . I am in love with Canon 5DmkIII.

 

[Bosman]

You must've missed this firmware/hardware combo update, then:




seriously though, I am VERY happy with the mkIII . . . it IS the BEST. I would not ask for much except that they release firmware to fix any flash issues, and whatever minor things we can all find, but nothing unexpected with a primo month camera release. . . . I am in love with Canon 5DmkIII.
[/quote]
Haha we have some good photoshoppers in here!

 

[@!ex]

I need to get my focus point to always be displayed in red like my 1dm3. Its a pain to have to hit the focus point grid just to see if i have the right focus point on the subject when its dark.

I also want to have custom flash settings for my custom settings, that is not allowed as yet. I have one settings that i want only low light and disable the flash but have my flash assist beam from my flash helping to lock focus.

Also I'd like the ability to save all my custom settings to a card so if i have a second 5dm3 i can just load them in.

Im sure i am forgetting a couple but of all of them the flash settings would prob least likely be done by Canon but i hope i am wrong.

Please contact Canon Support using this link, i think the more input they get about these things the more they will want to make it happen.
http://www.usa.canon.com/cusa/support/professional/professional_cameras/eos_digital_slr_cameras/eos_5d_mark_iii/form_display/support_by_email

http://gdlp01.c-wss.com/gds/8/0300007348/01/eos5dmkiii-im-c-en.pdf

Page 102

Just figured out something interesting on this point. If you enable VF display illumination to on instead of auto (last AF menu screen) and then custom set the joystick to direct AF selection (so you don't have to press the AF selection button first to change points) the selection point will flash red every time you touch the joystick, so you can instantly see the AF point even in the dark. A tiny workaround but pretty useful.

 

[Bosman]

I need to get my focus point to always be displayed in red like my 1dm3. Its a pain to have to hit the focus point grid just to see if i have the right focus point on the subject when its dark.

I also want to have custom flash settings for my custom settings, that is not allowed as yet. I have one settings that i want only low light and disable the flash but have my flash assist beam from my flash helping to lock focus.

Also I'd like the ability to save all my custom settings to a card so if i have a second 5dm3 i can just load them in.

Im sure i am forgetting a couple but of all of them the flash settings would prob least likely be done by Canon but i hope i am wrong.

Please contact Canon Support using this link, i think the more input they get about these things the more they will want to make it happen.
http://www.usa.canon.com/cusa/support/professional/professional_cameras/eos_digital_slr_cameras/eos_5d_mark_iii/form_display/support_by_email

http://gdlp01.c-wss.com/gds/8/0300007348/01/eos5dmkiii-im-c-en.pdf

Page 102

Just figured out something interesting on this point. If you enable VF display illumination to on instead of auto (last AF menu screen) and then custom set the joystick to direct AF selection (so you don't have to press the AF selection button first to change points) the selection point will flash red every time you touch the joystick, so you can instantly see the AF point even in the dark. A tiny workaround but pretty useful.

Been doing that but its even easier to hit the focus button, but it lights everything but with the focus point brighter, prob something i can alter in settings.

 

[daveswan]

They seriously need to fix the I-frame codec, and probably the IBP while they're at it. CBR not VBR please.

Oh, and the link provided only works for USA people.

 

[Bosman]

They seriously need to fix the I-frame codec, and probably the IBP while they're at it. CBR not VBR please.

Oh, and the link provided only works for USA people.

Go to your canon site/ go to 5dm3/ on the page there is the main page for the 5dm3 and the whats in the box, overview, features, and such. Select the "Service & Support" portion and email.
That is where i found it on USA's obviously, it should be similar for you wherever you are.

 

[Bosman]

Discovered a new quirk in the firmware. I set my set button for zooming to the focus point. Funny thing is i set it on all my c1, c2, c3 and regular camera settings to zoom to the Focus point and it only zooms in if i am in a c function. When i am in manual or any other regular shooting style it doesn't zoom.
Going to write Canon now.

 

[JR]

I hope they fix the espresso maker. Having a reliable source of caffeen in the morning is essential for us professional photographers. My 5DIII is not very good at making espresso with the current firmware. Hope they fix it!!

You must've missed this firmware/hardware combo update, then:




seriously though, I am VERY happy with the mkIII . . . it IS the BEST. I would not ask for much except that they release firmware to fix any flash issues, and whatever minor things we can all find, but nothing unexpected with a primo month camera release. . . . I am in love with Canon 5DmkIII.

Now that is a very creative picture!

 

[JR]

On a more serious note as mention in other thread i would love to see a feature whereby we can highlight the focused area when shooting in live view...

 

[Bosman]

On a more serious note as mention in other thread i would love to see a feature whereby we can highlight the focused area when shooting in live view...

not sure i get what you mean JR...