I had an older battery in my R6 and for about a minute, the evf started Behaving Badly. It would just stutter and jerk like crazy even moving the camera slowly. I turned the camera off and on and everything was fine.
Upvote
0
Have you tried turn the brightness level up and down manually? I just think it might be relate to PWM (Pulse-Width Modulation).How do you like that--replying to yourself!?! But just an update to say that my camera continues to do the same thing of intermittently freezing/locking up requiring that I remove the battery to reboot it and then it resumes like nothing ever happened. Still no special cause except it definitely is NOT associated with high speed shooting or high temperatures.
Catherine
Wanted to start a thread for legit R5/R6 camera issues or defects, not speculations or complaints/wish lists about the design. Please don't complain about video times or other design wishes here as there are a million threads and sites for that. I'm hoping we can collect actual potential manufacturing defects from people who own the camera in this thread. To start off those I am aware of:
1) I know one poster here cannot get the intervalometer to work no matter what he tried, and was going to send off for repair at Canon's suggestion. EDIT: apparently Ramage below has an answer, remapping focus button causes the issue, Canon is aware and will fix in firmware.
2) For my R5, I have gone night shooting and found several bright red stuck/hot pixels on the sensor that become evident when exposures are set for slow shutter >1s, ISO >800, apertures are F4 or larger. Combining multiple low light exposure settings make them brightest (high ISO + wide apertures + slowest shutters) but any one setting when cranked enough will produce them.
These hot pixels show on both EVF and LCD screen, so is definitely the sensor pixels. A few of them twinkle which is odd, perhaps high ISO NR and exposure preview working together. The stuck pixels do not make it into images, but I have not tested with high ISO NR off or made sure LR or photoshop isn't taking care of them.
For all Canon cameras, cleaning the sensor manually typically remaps or attempts to shut off stuck pixels upon power down, but failed to help at all here. Walked through it again with Canon Service rep just to be thorough, no joy. My R5 also has several lesser spots of dimmer red, green or blue pixels, perhaps 10 defects total.
Canon support has been great as usual, and is taking care of the problem with a warranty repair and shipping. I hear I should bne out of a camera for about a week, no biggie as I have a 5D4 and no jobs or hobby trips planned right now with the awful smoke in the area. Hopefully the next sensor is better- I can deal with a couple dim bad pixels but not so many bright ones, plus over time usually a sensor develops a couple more, so to start with several isn't great. For high MP sensors it is normal to have a few bad pixels eventually, but the two spots of several bright red pixels both myself and Canon agree is not normal for a new camera to have.
2) For my R5, I have gone night shooting and found several bright red stuck/hot pixels on the sensor that become evident when exposures are set for slow shutter >1s, ISO >800, apertures are F4 or larger. Combining multiple low light exposure settings make them brightest (high ISO + wide apertures + slowest shutters) but any one setting when cranked enough will produce them.
Is there anything new with your hot pixel story?
I have a similar story to report.
I bought two Canon R5 bodys. One has absolutely no hot pixels on the sensor.
But with the other, I immediately noticed that when I point the camera at a dark subject, individual red/blue or white pixels stand out here and there. I could rule out pixel errors from the EVF and display LCD. It definitely comes from the sensor. That's why Canon's percentage of acceptable pixel errors in the manual doesn't apply here either.
Canon CPS support confirmed to me that they could reproduce it with their reference camera. But they wanted to dismiss it as normal and let me know that this specification in the manual where it clearly says "LCD of the EVF and display" applies to my case and I have to accept that.
High ISO, long exposure time or small aperture and depth of field preview button press favors the visibility. But I can often see them even under normal conditions. I see them best when I put the lens cap on.
I have seen these pixels show up in the image at long exposures over 4s as well.
I tried using "Clean Now" with the lens cap on to trigger the pixel mapping, but to no avail.
I then had the camera exchanged by my dealer because I consider it a defect and do not accept it with such an expensive camera. Further, my other R5 does not have these problems.
But the exchange had again permanently visible hotpixel. Only in a different place, different number and different colors.
Meanwhile I am with my seventh exchange device and so far none was without these pixels except my first R5.
The story goes on... Unfortunately!
I just changed my mind, and ordered a second 5D IVIf you're reading this and still want to buy an R6, wow.
Bruh this is a thread specifically for sharing bugs and defects.No issues with my R5. I'm not picky, I don't take photos with the lens cap on or look for issues that are impossible to spot in a correctly captured photo. I've had no hangs or issues. I have a older Lp-E6N battery along with the new one that came with the camera. The camera is just over 9 months old.
Bruh, I am sure @Mt Spokane Photography knows what the thread is about... Your necro bump likely popped up for him as it did me and he responded to the thread.Bruh this is a thread specifically for sharing bugs and defects.
And he contributed with good information that he has the camera for 9 months with no bugs or defects. Information that may be more valuable for potential buyers.Bruh this is a thread specifically for sharing bugs and defects.
I am starting to see quite a few hot pixels on my R6 as well. Considering taking it back to see what Canon will do.Sorry but found this searching for hot pixel issues. Coming from a 60D and 200D, I know hot pixels happen but not sure how to interpret on my new R6.
One note - taking shots with lens cap on is precisely part of my workflow for dark frames and Astrophotography. I’m seeing 25-30 pixels that are either red, blue, or white. The red/blue are predominant but I have a half dozen or so white and now trolling back through my first shots (400 maybe so far) I can def see them in anything 1” or longer and in many cases shorter shots will show them as well. Obv not all, but more so the white ones.
I'm seeing this on my R6 also; same colors of hot pixels and the same quantity. The most noticeable for me are the red pixels. Shutter speed was around 1s or slightly faster while doing some photography about an hour after sunset. A few exposures had a lot of hot pixels while others didn't. I'll have to experiment to see if there is a certain condition/setting causing this.Sorry but found this searching for hot pixel issues. Coming from a 60D and 200D, I know hot pixels happen but not sure how to interpret on my new R6.
One note - taking shots with lens cap on is precisely part of my workflow for dark frames and Astrophotography. I’m seeing 25-30 pixels that are either red, blue, or white. The red/blue are predominant but I have a half dozen or so white and now trolling back through my first shots (400 maybe so far) I can def see them in anything 1” or longer and in many cases shorter shots will show them as well. Obv not all, but more so the white ones.